• Journal of Welding and Joining
• /
• v.20 no.4
• /
• pp.510-516
• /
• 2002

Recently the laser welding technology has been applied increasingly for the automotive bodies. But the lap joint laser welding for 3 dimensional automotive body is new while the butt joint laser welding is well known as the tailored blank technology. In this study, the process window was found for the full penetration welding of the lap joint of the 1mm-thick high strength steel sheets. The limit curves and characteristic curves were suggested to define the boundaries and the contour lines in a space of the welding speed and the gap size. The characteristics of the weld sectional geometry were used to determine the limit curves. They are bead width, penetration depth and sectional area. After the observed data was analysed carefully, it was noticed that there was a transition point at which the sectional shape was changed and the bead area jumped as the welding speed was increased. Also a new concept of 'input energy Per volume' was suggested to distinguish the difference at the transition Point. The difference of sectional areas at the transition point can be related to the dynamic keyhole phenomena.

• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.7-13
• /
• 2007

Numerical analysis is carried out for combined heat transfer in an indirected NIR(Near Infrared Ray) heating chamber. Reynolds number and shapes of absorbed cylinder are known as important parameters on the combined heat transfer effects. Reynolds number based on the outer diameter of the cylinder is varied from $10^3$ to $3{\times}10^5$. Four difference heat transfer regimes are observed: forced convection and radiative heat transfer on the outer surface of the cylinder, pure conduction in the cylinder body, pure natural convection and radiation between lamp surface and inner surface of the cylinder, and radiation from the lamp. Flow and temperature characteristics are presented with iso-contour lines for the absorbed circular and elliptic cylinders to compare their differences. The convective and radiative heat transfer fluxes are also compared with different Reynolds numbers. As usual, Reynolds number is an important factor to estimate increasing convective heat transfer as it increases. The shape of absorbed cylinder results overall heat transfer rates remain unchanged.

• Science of Emotion and Sensibility
• /
• v.11 no.3
• /
• pp.301-312
• /
• 2008

Satisfaction of consumer preferences is a key factor for the success of the products. Therefore, design mangers try to develop the profitable products through the intensive survey on the consumer preferences. Although the studies on the preferable product design and the design factors have long been carried out, most of these studies dealt only with the design factors preferable for individual product category ignoring the relationship of the product categories which are related to each other. For designers and design managers, in this study, we propose the guidelines of successful product development by finding preferred common and distinct design factors through analysis of the relations between the consumer preferences and design factors in various portable electric devices. To this end, we analyzed the preferred common and distinct design factors from portable electric devices including the electronic dictionaries, notebook computers, cellular phones, and MP3 players. We used hierarchical regression analysis for the effects of the design factors on the preferences among the product categories and regression analysis for the effects among each product category. The analysis on the preferred common design factors among the four product categories revealed that consumers did not care about the whole body type but preferred white color, metallic and glassy texture in the body. Also, the preferred design factors in the each product category are as follows; oval body shape and black color in electronic dictionaries, white color, metallic and glassy texture in notebook computers, plastic texture in cellular phones, rectangular body shape and plastic texture in MP3 players. In the case of notebook computers, the preferred common and distinct design factors were the same. We expect these results will be helpful for designers and design managers to identify the preferred design factors to consider when developing the various portable electric devices.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4A
• /
• pp.353-359
• /
• 2010

Cementitious matrix based composites are vulnerable to the drying shrinkage crack during the curing process. In this study, the drying shrinkage induced fracture behavior of the fiber reinforced concrete is simulated and the effects of the fiber reinforcement conditions on the fracture characteristics are analysed. The numerical model is composed of conduit elements and rigid-body-spring elements on the identical irregular lattice topology, where the drying shrinkage is presented by the coupling of nonmechanical-mechanical behaviors handled by those respective element types. Semi-discrete fiber elements are applied within the rigid-body-spring network to model the fiber reinforcement. The shrinkage parameters are calibrated through the KS F 2424 free drying shrinkage test simulation and comparison of the time-shrinkage strain curves. Next, the KS F 2595 restrained drying shrinkage test is simulated for various fiber volume fractions and the numerical model is verified by comparison of the crack initiating time with the previous experimental results. In addition, the drying shrinkage cracking phenomenon is analysed with change in the length and the surface shape of the fibers, the measurement of the maximum crack width in the numerical experiment indicates the judgement of the crack controlling effect.

• Korean Journal of Environmental Biology
• /
• v.39 no.1
• /
• pp.55-67
• /
• 2021

A 210-day experiment was conducted to examine the effects of starvation on survival, external morphometric traits, and sectioned morphometric traits in Far Eastern catfish(Silurus asotus). The survival rate decreased to 92.2±0.47% in the fed group and to 74.4±2.59% in the starved group. Eight dimensions of Ls, DALPO/Ls, DADOP/Ls, ED/Ls, CH/Ls, BDAA/Ls, BDMA/Ls, and BWAA/Ls showed significant differences (p<0.05), and 16 other dimensions of DALAD/Ls, DPDPL/Ls, HPLAA/Ls, HALAV/Ls, HALOP/Ls, DAUPO/Ls, DADAV/Ls, DADAA/Ls, Max BL/Ls, Man BL/Ls, LD/Ls, HWOP/Ls, DAUF/HL, DAUS/HL, IW/HL, and DAUE/HL were not significantly different among the initial, fed, and starved groups (p>0.05). The fed group showed higher total height (THX), wider width (WX), and larger area (AX) than those of the starved group in each body section. This research provides information on the morphometric traits and body sections of starved Far Eastern catfish. These results can be used as a basic guide to indicate nutritional status and assist in aquaculture methods for Far Eastern catfish. Moreover, the methods used in this study were considered helpful because the survey analysis method can be used to investigate information on the nutritional status of other fish species.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.663-669
• /
• 1999

The purpose of this study was to investigate the effects of vitamin E on the histochemical change of kidney tissue in diabetic rats. Sprague Dawley male rats weighing 100$\pm$10g were randomly assigned to one normal and three STZ induced diabetic groups, which were subdivided into vitamin E free diet(DM 0E group), 40mg vitamin E per kg diet(DM 40E group) and 400mg vitamin E per kg diet(DM 400E group). Vitamin E level of normal group was 40mg per kg diet. Diabetes was exper imentally induced by intravenous injection of 55mg/kg of body weight of streptozotocin(STZ) in citrate buffer(pH 4.3) after 4 weeks feeding of experimental diets. Animals were sacrificed at the 6th day of diabetic states. The contents of thiobarbituric acid(TBARS) in kidney were increased 119%, 84% and 33% in DM 0E, DM 40E and DM 400E groups, respectively, compared to normal group. That of DM 400E group was decreased 39% compared to DM 0E group. Content of 2 microglobulin in urine in DM 0E, DM 40E, and DM 400E groups were increased by 248%, 181%, and 164%, respectively, compared to normal group. The diabetic groups showed the regressive lesion such as renal tubule, intumescence of epithelial cell, vacuolization. The results of the observation through electronic microscope showed the mitochondria shape of proximal tubule epithelial cell, irregular array, increase of ribosome, and irregular arrangement of small villosity, etc. These types of changes appeared severer in DM 0E group than in DM 400E group. These results indicate that the TBARS productions on kdney in STZ induced diabetic rats were increased, consequently those leaded to damage of renal tubule and minuteness structure. But a large quantity vitimin E supplementation was suppressed in TBARS production and improved in peroxidative damage of renal tissue so that relieved degenerative changes of renal tubule epithelial cell.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.3
• /
• pp.233-240
• /
• 2015

Analysis of the aerodynamic performance of a bobsleigh has been performed for various types of bobsleigh body shape. To analyze the aerodynamic performance of the bobsleigh, three-dimensional Reynolds-averaged Navier-Stoke equations were used with the standard k-${\varepsilon}$ model as a turbulence closure. Grid structure was composed of unstructured tetrahedral grids. The radii of curvature of cowling, and height and length of front bumper at the tip on the drag coefficient were selected as geometric parameters. And, the effects of these parameters on the aerodynamic performance, i.e., the drag coefficient, were evaluated. The results shows that the aerodynamic performance is significantly affected by the height of front bumper and radius of curvature.

• The korean journal of orthodontics
• /
• v.41 no.4
• /
• pp.280-287
• /
• 2011

Objective: This study compared the stability of cylindrical miniscrews (Cy, 7 mm in length) with that of tapered miniscrews (Ta, 5 mm in length), using torque values to determine if the healing time before loading affects the stability of the miniscrew and if the insertion torque is associated with the removal torque measured after a few weeks of healing. Methods: Ta and Cy with different thread lengths were placed in the tibias of 12 female New Zealand white rabbits (body weight: 3.0 - 3.5 kg), and the maximum insertion torque values (ITV) were measured. No orthodontic forces were applied so as to allow us to determine the pure effects of the different shapes. After 3 different healing periods (2, 4, and 6 weeks), maximum removal torque values (RTV) were measured immediately before the rabbits were sacrificed. Results: No miniscrews were loosened. There were no significant differences in ITV or RTV between the Ta and Cy nor were there any significant differences in the ITV and RTV between the 3 groups, which had different healing periods. There was a correlation between the ITV and RTV. Conclusions: Shorter Ta showed similar stability as Cy, as determined by torque values. This result strongly suggests that the tapered shape is more advantageous than the cylindrical shape. The RTV did not increase significantly over time. It is recommended that a miniscrew be loaded immediately; waiting a few weeks before loading should be avoided. The correlation between the ITV and RTV suggests that the ITV can be used to estimate a screw's future stability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.1-6
• /
• 2017

Stents are widely used as the most common method of treating coronary artery disease with implants in the form of a metal mesh. The blood flow is normalized by inserting a stent into the narrowed or clogged areas of the human body. In this study, the mechanical characteristics of a stent are investigated according to the variations of its design parameters by the Taguchi method and finite element analysis. A stent model of the Palmaz-Schatz type was used for the analysis. In the analysis, an elasto-plastic material model was adopted for the stent and a hyper-elastic model was used for the balloon. The main interest of this study is to investigate the effects of the design parameters which reduce the possibility of restenosis by adjusting the recoil amount. A Taguchi orthogonal array was constructed on the model of the stent. The thickness and length and angle of the slot were selected as the design parameters. The amounts of radial recoil and longitudinal recoil were calculated by finite element analysis. The statistical analysis using the Taguchi method showed that optimizing the shape of the stent could reduce the possibility of restenosis. The optimized shape showed improvements of recoil in the radial and longitudinal directions of ~1% and ~0.1%, respectively, compared to the default model.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.53-62
• /
• 2014

The floor field model is the micro pedestrian model based on a cellular automata for modeling pedestrian movement in the interior space using the static and dynamic floor field. It regards a form of pedestrian as square but the actual pedestrian's shape and size are similar to ellipsoid or rectangle. Because of this, we are difficult to give a rotation effect to pedestrians and there is a limit to reflect an impact of clogging and jamming. Also, this model is not able to reflect an impact of a posture and visibility effectively in the pedestrian movement. In this study, we suggest the improved pedestrian model incorporating the actual shape and size of pedestrian. The pedestrian's shape is defined not square but rectangle which is close to the actual body size of Korean. Also, we define the model which is able to represent the impact of clogging and jamming between pedestrians by adding the pedestrian's posture. We develop the simulator for testing the suggested model and study the difference between two models by comparing a number of effects. As a result, we could confirm solving the problem with dynamic value in the existed model and reflecting the panic effect in evacuation situation.