• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.3
• /
• pp.321-327
• /
• 2006

This study was performed to investigate the hypoglycemic effect of pine needle extract oil against type 2 diabetes. Six-week-old male C57BL/Ks(db/db) mice were divided into four groups : negative control, pine needle extract oil low dose, high dose and positive control groups, which fed daily for 6 weeks with corn oil, pine needle extract oil 112.5 mg/kg, 450 mg/kg or metformin (150 mg/kg ), respectively. The oral administration of the pine needle extract oil resulted in the significant and dose-dependent decreases of blood glucose levels in comparison with corn oil treatment. The levels of HbAlc showed a tendency of the decrease by the high dose treatment of the pine needle extract oil and were positively correlated with blood glucose levels (r=0.5046, p=0.0023) . However, the levels of serum insulin and C-peptide were not affected by pine needle extract oil or metformin treatments. The levels of serum leptin, which is related with the insulin sensitivity, showed a tendency of the increases by pine needle extract oil treatment and were negatively correlated to blood glucose levels (r=-0.4754, p=0.0052). In conclusion, these results suggest that the pine needle extract oil have a potential for the oral anti-hyperglycemic agent and the mode of action may be related with the improvement of the insulin sensitivity through blood leptin.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.2
• /
• pp.157-164
• /
• 2000

Objectives : This study was peformed to determine the reference values of blood lead, manganese, aluminium, and silicon in healthy adults. Methods : The subjects were 132 (67 male and 65 female), and classified to three age groups $(\leq39,\;40\sim49,\;and\;50\leq)$. Blood lead, manganese and aluminium were analyzed by atomic absorption spectrophotometer, and blood silicon was analyzed by direct current plasma optical emission spectrometer. Results : Blood lead levels(geometric mean, S.D) were (3.49, 1.70) ${\mu}g/dL$ in male and (3.04, 1.65) ${\mu}g/dL$ in female, but the difference is not significant, and there was no significant difference between age groups. Mean blood manganese level was $0.99{\pm}0.41{\mu}g/dL$, and there was no significant difference between sex or age groups. Mean blood aluminium level was $0.59{\pm}0.35{\mu}g/dL$, and there was no significant difference between sex or age groups. Mean blood silicon level was $54.41{\pm}27.64{\mu}g/dL$ in male and $43.34{\pm}23.51{\mu}g/dL$ in female, and the level in male was significantly higher than that in female (p<0.05). There was significant difference between age groups, and the oldest showed the highest level in male (p<0.05), but no significant difference between age groups in female. Conclusions : Authors hope that this study would provide basic data for determining reference values and evaluating health effects.

• Journal of the Korean Magnetics Society
• /
• v.16 no.5
• /
• pp.255-260
• /
• 2006

The basic composition of Ni-Zn ferrite was $(Ni_{0.35}Cu_{0.2}Zn_{0.45})_{1.02}(Fe_2O_3)_{0.98}$ (group A) and $(Ni_{0.4}Cu_{0.2}Zn_{0.4})_{1.02}(Fe_2O_3)_{0.98}$(group B) with additional 0.1 mol% $CaCO_3$ and 0.03 mol% $V_2O_5$. For high permeability and acceleration of grain growth, $CaCO_3$ and $V_2O_5$ was added. The mixture of the law materials was calcinated at $600^{\circ}C$ for 2 hours and then milled. The compacts of toroidal type were sintered at different temperature ($1,050^{\circ}C,\;1,070^{\circ}C,\;1,100^{\circ}C$) for 2 hours in air followed by an air cooling. Then, effects of various composition and sintering temperatures on the microstructure and physical properties such as density, resistivity, magnetic induction, coercive force, initial permeability, quality factor, and curie temperature of the Ni-Zn ferrite were investigated. The density of the Ni-Zn ferrite was $4.90{\sim}5.10g/cm^3$, resistivity revealed $10^8{\sim}10^{12}{\Omega}-cm$. The average grain size increased with the increase of sintering temperatures. The magnetic properties obtained from the aforementioned Ni-Zn ferrite specimens were 4,000 gauss for the maximum induction, 0.25 oersted for the coercive force, 2,997 for the initial permeability, 208 for the quality factor, and $202^{\circ}C$ for the curie temperature. The physical properties indicated that the specimens could be utilized as the core of microwave communication and high permeability deflection yoke of high permeability.

• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.395-406
• /
• 2009

Fifty four Hanwoo steers in final fattening period were assigned to 3 groups control, top dressed $PROSOL^{(R)}$ as an emulsifier (TP) and DSP group (experimental diet made to down spec of nutrients with $PROSOL^{(R)}$, which is sodium stearoyl-2-lactylate), based on the body weight (647.96${\pm}$41.31 kg) and months of age (27.3${\pm}$0.8 mo), and the experiment was conducted to establish the reasonable fattening method of Hanwoo steers for 91 days. Average daily body gains during trial were 0.94, 0.84 and 0.98 kg in control, TP and DSP, respectively (P=0.011). DDMI/ADG of TP group tend to lightly improving compared to control and DSP group (P=0.692). There was no effect of supplementation of the $PROSOL^{(R)}$ in concentrates on growth rate, feed efficiency and shrinkage in Hanwoo steers during the short final fattening period. MQI from TP and DSP was not different based on the rib-eye area and carcass weight in carcass than that from control. Back fat thickness tended to be thicker than control (P>0.05). Marbling score, texture and maturity for TP and DSP was abundantly to increase compared to control (P<0.003). There was significantly increment in supplemented $PROSOL^{(R)}$ (P<0.0001). The meat quality grade of control, TP and DSP were 2.94, 3.78 and 4.50, respectively. Related to this result, the auction price (carcass/kg) were gained significantly (P<0.003) from control (17,560), TP (18,586) and DSP (19,266 won) so which the monetary return was the highest in DSP and the differences was recognized between TP and DSP. Percentage over 1st grade appeared in control, TP and DSP were 55.4, 88.9 and 100.0%, respectively. These results supported the hypothesis that supplementation of emulsifier improve the marbling score and the carcass quality grade by increased digestibilities of the feed fat in Hanwoo steers in fattening period.

• International Area Studies Review
• /
• v.21 no.4
• /
• pp.41-63
• /
• 2017

FDI can either be absorbed in the production cycle with domestic investment and create an inducement effect or it can remain as an exogenous factor and increase the volatility of GDP. The purpose of this paper is to research these different impacts that FDI could have. For that, the endogenous growth theory was employed. The statistic method used are the panel model for sectoral analysis, and GARCH model and VAR for time series analysis. Myanmar was selected as this paper's research subject because it is one of countries which had a colossal amount of FDI inflow recently. The panel analysis did not confirm the causality between sectoral FDI and sectoral GDP. The reason for this could be in the lack of data, since sectoral data exists yearly only during 2006-2016. Therefore this study conducted the times series analysis. According to the results, during 2006 until 2010, it showed signs of GARCH but the effect of FDI on GDP was nonexistent, which means FDI was not integrated into the domestic production cycle but stayed in residual terms. During 2011 to 2016, FDI seemed to affect the growth of Myanmar's GDP. The estimation confirmed the existence of GARCH and the Granzer causality test confirmed that FDI influenced the GARCH, which signified FDI increased the volatility of GDP. The VAR analysis showed responses of GDP to FDI was small(about 0.0007). This research assumes that FDI can be divided in two parts: one part which can be assimilated in the domestic production cycle and the other where it stays outside of the production cycle. The former creates production inducement effect and the latter only increases the volatility of GDP. According to this study, the latter outweighs the former impact in Myanmar.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.283-288
• /
• 2011

This study was conducted to study the environment effects on live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score, which are the carcass traits of Hanwoo, based on the estimates and all the possible regression for the selection of variable and significance test for 231,382 heads that underwent the carcass measurements. The average and standard deviation for the live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score were 654.79${\pm}$91.61 kg, 362.30${\pm}$67.15 kg, 59.52${\pm}$0.03%, 81.79${\pm}$12.21 $cm^2$, 11.39${\pm}$5.40 mm, 4.38${\pm}$2.29, respectively. The live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score for cow were 532.79${\pm}$78.38 kg, 313.40${\pm}$44.90 kg, 56.50${\pm}$0.03%, 75.24${\pm}$10.69 $cm^2$, 11.82${\pm}$5.10 mm, 4.30${\pm}$2.06, respectively, while for bull were 619.74${\pm}$93.27 kg, 376.89${\pm}$48.62 kg, 58.61${\pm}$0.02%, 85.61${\pm}$10.46 $cm^2$, 5.64${\pm}$2.71 mm, 1.41${\pm}$0.83, respectively, and for steer were 681.78${\pm}$70.72 kg, 415.23${\pm}$49.43 kg, 60.19${\pm}$0.02%, 88.29${\pm}$10.27 $cm^2$, 12.71${\pm}$5.23 mm, 5.42${\pm}$1.99, respectively. In the environmental variables selection based on the variables selection method, the examination by carcass traits suggested that the most appropriate model could be determined when five variables were selected for the live weight, carcass weight, dressing percentage, eye muscle area, and four variables for backfat thickness, and marbling score. When they were considered at a time altogether based on multiple traits, it was deemed to be desirable to insert all five variables into the variables for analysis. In addition, high significance was found by carcass traits.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.296-300
• /
• 2015

This study was conducted to investigate optimal crop loads of 'Jinok' grape for unheated plastic house culture. The crop loads of 'Jinok' grapes were managed to be 1.3, 1.8, 2.2, 2.4, and 2.6t per 10a from 2012 to 2014. We measured vine growth and berry qualities. Crop loads were not significantly affected on plant height, trunk diameter, shoot length, and the internode length of 'Jinok'. However, the maturation of berries was delayed when the crop load was higher. And the harvest date was earlier about three weeks in an unheated plastic house compared to in an open field. The average berry weight was decreased by the higher crop load although higher crop loads made higher yields showing the lowest weight at 342g with the treatment of 2.6t per 10a and the highest weight at 363g with the treatment of 1.3t per 10a. Also, the soluble solids content showed a tendency that higher crop loads brought to lower degree Brix. The contents of P, K, Ca, and Mg in grape leaves and shoots were not significantly different by crop loads. To sum up, when crop loads were under the 2.4t per 10a, the berries were harvested as a marketable fruit having $15^{\circ}Brix$ in the cultivar 'Jinok' grape. This result could help to increase grower's benefit having improved quality of fruit for the sustainable production by the established cultivation techniques for the newly developed cultivar 'Jinok'.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.110-120
• /
• 2005

For utilizing vitrification to treat low and intermediate level waste, industrial pilot plant was designed and constructed in October 1999 at Daejon, Korea through the joint research program among NETEC, MOBIS and SGN. More than 70 tests were performed on simulated IER, DAW etc. including key nuclide surrogate(Cs, Co); this plant has been shown to vitrify the target waste effectively and safely, however, some dust are generated from the HTF(High Temperature Filter) as a secondary waste. In case of long term operation, it is also concerned that pipe plugging can be occurred due to deposited dust in cooling pipe namely, connecting pipe between CCM(Cold Crucible Melter) and HTF. In this regard, we have developed the special complementary system of the off-gas treatment system to recycle the dust from HTF to CCM and to remove the interior dust of cooling pipe. Main concept of the dust recycling is to feed the dust to the CCM as a slurry state; this system is regarded as of an important position in the viewpoint of volume reduction, waste disposal cost and glass melt control in CCM. The role of DRS(Dust Recycling System) is to recycle the major glass components and key nuclides; this system is served to lower glass viscosity and increase waste solubility by recycling B, Na, Li components into glass melt and also to re-entrain and incorporate into glass melt like Cs, Co. Therefore dust recycling is helpful to control the molten glass; it is unnecessary to consider a separate dust treatment system like a cementation equipment. The effects of Dust Cleaner are to prevent the pipe plugging due to dust and to treat the deposited dust by raking the dust into CCM. During the pilot vitrification test, overall performance assessment was successfully performed; DRS and Dust Cleaner are found to be useful and effective for recycling the dust from HTF and also removing the dust in cooling pipe. The obtained operational data and operational experiences will be used as a basis of the commercial facility.

• Journal of Korea Port Economic Association
• /
• v.34 no.4
• /
• pp.1-16
• /
• 2018

The standard shift-share analysis decomposes a region's sectoral growth into three components: national, industry-mix, and regional-shift effects. Nevertheless, the three components of the traditional shift-share are not related to the behavior of the regional economies that are neighbors of the region under analysis. We incorporate a spatial structure within this basic formulation, and consider spatial interaction in the decomposition analysis. Daesan Port's export grew steadily at an annualized average rate of 4.0% during 2011-2017, and its rank, in terms of export performance, was 13 in 2010; this rose to 6 in 2016, then declined slightly to 7 in 2017 before reaching 6 as of June, 2018. However, not all ports have a similar growth path. The Onsan Port's share declined from 27.4% in 2011 to 21.0% to 2017, whereas the share of petroleum product exports of Daesan Port increased rapidly, from approximately 8.5% in 2011 to 16.0% in 2017. The standard shift-share analysis shows that petroleum products and basic petrochemicals have a positive regional in dustry-mix effect, but petrochemistry materials and synthetic resins have a negative sign, indicating that the former's exports grow faster than national export, while the increase of the latter's export is slower than national one. The spatial shift-share model indicates that for both petroleum products and basic petrochemicals, Incheon and Ulsan Ports have a positive value for the neighbor-nation regional shift effect and a positive value for the region-neighbor regional shift effect. This paper also shows that Yeosu Port for petroleum products; Ulsan Port for basic petrochemicals; Ulsan, Onsan and Yeosu Ports for petrochemistry materials; and Ulsan, Busan, and Incheon Ports for synthetic resins have a positive value for the neighbor-nation regional shift effect but a negative value for the region-neighbor regional shift effect.

• Journal of vocational education research
• /
• v.36 no.1
• /
• pp.47-75
• /
• 2017

The purpose of this study was to provide basic data for policy making for secondary vocational education in each region and transformation in vocational high schools. To achieve this, the regional strategic industries in Daejeon and Jeonnam were selected, new demand for vocational high school graduates was forecasted in each industry and occupation. The results of the study are as follows. First, locational quotient analysis and regional shift-share analysis revealed that Daejon and Jeonnam have different strategic industries. Daejon, unlike Jeonnam strategically develops 'manufacturing food, beverage and tobacco', 'manufacturing timber and paper, printing and copying', 'public service and administration of national defense and social security' and 'manufacturing electrical devices, electronics and precision devices'. Jeonnam has specialized industries distinguished from Daejon's, which are 'manufacturing of machinery transportation equipments and etc', 'manufacturing of non-metallic minerals and metal products', 'electric, gas, steam and water supply systems/industries', 'manufacturing coal and chemical products, refining petroleum', 'mining' and 'agriculture, forestry and fishery'. Second, new demand for vocational high school graduates by occupations and industries showed regional differences(in Daejon and Jeonnam). According the forecast, Daejon will have many workforce demands based on manufacturing industries, on the other hand Jeonnam's focused on service industries. Analysis by occupations was also different, Daejon showed high demands on professional and related workers, while Jeonnam requested many new office and service workers. Third, new workforce demand by occupations in regional strategic industries is big part of overall new workforce demand both in Daejon and Jeonnam. Forth, according to the results of analyzing the new demand for vocational high school graduates in Daejeon and Jeonnam in terms of industry location quotient and change effect, there was high demand in industries with positive total change effects. In terms of location quotient, Daejeon and Jeonnam showed different results.