• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1751-1767
• /
• 2016

Home security has become the prime concern for everyone in present scenario. In this work an attempt has been made to develop a home security system which is accessible, affordable and yet effective.The proposed system is based on 'Remote Embedded Control System' (RECS) which works both on the web and gsm platform for authentication and monitoring. This system is therefore cost effective as it relies on existing network infrastructure. As PCA is most popular and efficient algorithm for face recognition, it has been usedin this work. Next to it an interface has been developed for communication purpose in the embedded security system through the ZigBee module. Based on this embedded system, automated control of door movement has been implemented through electromagnetic door lock technology. This helps the users to monitor the real-time activities through web services/SMS. The web service consists of either web browser command or e-mail provision. The system establishes the communication between the system and authenticated user. The e-mail received by the system from the authorized person will monitor and control the real-time operation and door lock. The entire control system is reinforced using ARM1176JZF-S microcontroller and tested for actual use in the home environment. The result shows the experimental verification of the proposed system.

• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.143-150
• /
• 2011

Copper electroplating has been applied to various fields such as decorative plating and through-hole plating. Technical realization of high strength copper preplating for wear-resistant tools and molds in addition to these applications is the aim of this work. Brighters and levelers, such as MPSA, Gelatin, Thiourea, PEG and JGB, were added in copper sulfate electrolyte, and the effects of these organic additives on the hardness were evaluated. All additives in this work were effective in increasing the hardness of copper electrodeposits. Thiourea increased the hardness up to 350 VHN, and was the most effective accelarator in sulfate electrolyte. It was shown from the X-ray diffraction analysis that preferred orientation changed from (200) to (111) with increasing concentration of organic additives. Crystallite size decreased with increasing concentration of additive. Hardness was increased with decreasing crystallite size, and this result is consistent with Hall-Petch relationship, and it was apparent that the hardening of copper electrodeposits results from the grain refining effect.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.3
• /
• pp.276-283
• /
• 2005

The cooperative production system was proposed as an efficient production system to reduce the ship construction cost and to enhance the competitiveness for small/medium sized shipbuilder in the previous paper. In viewpoint of cooperative production system, the specialization of the FRP ship sizes has already been accomplished to reduce the number of the hull molds by FRP shipbuilders of the Sapjin industrial complex located in Mokpo area in 2003. There also exist lots of effective methods, as a cooperative production system, to cut down the construction cost. In this study, an effective production system in connection with the super structure and outfitting members is proposed such as the standardization of those items and specialized company which intensively produces the super structure and outfitting members at the collectivization area for cooperative work.

• Publications of The Korean Astronomical Society
• /
• v.4 no.1
• /
• pp.16-30
• /
• 1989

We present recent data of absolute measurements of flux emmitted in the visible continua of some galactic Wolf-Rayet stars, carried out by means of a two-channel scanner built up cooperatively by the Observatoire de Lyon and the Laboratoire d'Astronomie Spatiale. Our measurements lead to the determination of stellar angular diameters which enable us to compute log $L_*/L_{\odot}$ and to locate the WR stars in the HR diagram: The WR stars are cooler than the zero age main sequence (ZAMS) and the WN7, WN8 types appear more luminous than other subclasses. The stellar wind terminal velocities, $V_{\infty}$, deduced from the empirical relation of the effective temperatures by Underhil1(1983) and $V_{\infty}$ adopted from the work of Willis(1982) show about 2,000km/s. We derived the rate of mass loss for the program stars from the formula, $\dot{M}={\varepsilon}(T_{eff})\;L/V_{\infty}{\cdot}c$ by using the obtained effective temperatures, luminosities and $V_{\infty}$ in this work. Their values range from $\dot{M}=1.4{\times}10^{-5}$ to $\dot{M}=5.8{\times}10^{-5}\;\dot{M}_{\odot}/yr$.

• Journal of Korean Port Research
• /
• v.14 no.4
• /
• pp.429-439
• /
• 2000

The primary purpose of dredging work is to maintain navigational readiness and to increase environmental amenity. Therefore the dredging project, which is composed of excavating, removing, transporting and storing or dumping dredged material, must be carefully managed to insure that dredging works are completed in a cost-effective and environmentally safe method. The most important point in dumping operations is evaluating and decreasing the impacts of dumping works at the dumping area. One of the most effective method for this purpose is using the schematic process composed of the sophisticate plan, precise work and predicting/reducing the impacts based on an numerical model being closely linked with field observation. In this study, a numerical model is used to predict the spatial transport and fate of the effluent discharged from the confined dumping facility(CDF) located at a coastal area. To achive this purpose, numerical models were used for reappearing the tidal current of concerned area. These models were then applied to Mokpo harbpr where capital dredging and maintenance dredging are being conducted simultaneously and the CDF is under construction. In series of model case study, we found that the effluent discharged from CDF was governed by the receiving water condition and outfall geometry, so that limit of near-field was 14∼500 meter down stream and 4∼150 meter in transverse direction. dilution ranged from 1.1 to 8.2 on the cases. Long-term diffusion characteristics was governed by the dilution rate during near-field behavior, ambient conditions and CDF operation modes.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.11
• /
• pp.717-723
• /
• 1999

The transient characteristics of grounding systems play a major role in the protection of power equipments, electronic circuits and info-communication facilities against surges which arise from lightning or ground faults. Electronic devices are very weak against lightning surges injected from grounding systems and can be damaged. The malfunction and damage of electronic circuits bring about bad operation performances, a lot of economical losses, and etc. Therefore, in order to obtain the effective protection measure of electronic devices from overvoltages and lightning surges, the analysis of the transient grounding impedances in essential. One of this work is to examine the transient behaviors of grounding impedances under steplike currents for various grounding systems. And the other of this work is to evaluate the transient behaviors of a grid with rods under impulse currents and to investigate the effect of grounding lead wire. Transient grounding impedances of a grid with rods under impulse current waves have been measured as a parameter of the length of the grounding leads. Z-t, Z-i and V-i curves of transient grounding impedance under impulse current waveforms have been measured and analyzed. It was found that the grounding impedance gives the inductive, resistive and capacitive aspects under steplike current. Transient grounding impedance characteristics were very different with shapes, geometries of ground electrodes. Also, they were dependent on the waveform and magnitude of impulse current.

• Archives of design research
• /
• v.17 no.3
• /
• pp.373-382
• /
• 2004

Video protocol analysis is a popular and effective technique in many research disciplines including industrial design and HCI for understanding the interactions between people, and between people and machines. Analysing and transcribing video recordings is, however, notoriously time consuming, and a variety of single-user computer based tools have been developed to ease the task. This paper examines collaborative video analysis. The motivation for groupware tools for video analysis is described, and the desirable features of such tools are identified. The following section reviews related work on video analysis and on single-user video analysis tools. The review is used to derive a set of design goals for collaborative video analysis tools. We then detail prototype's user interface, its collaborative facilities, and its implementation. The preliminary evaluation is described prior the conclusions which identify directions for further work.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1088-1099
• /
• 2021

Time-frequency analysis technique is an effective analysis tool for non-stationary processes. In the field of reactor neutron noise, the time-frequency analysis method has not been thoroughly researched and widely used. This work has studied the time-frequency analysis of the reactor neutron noise experimental signals under bubble disturbance and control rod vibration. First, an experimental platform was established, and it could be employed to reactor neutron noise experiment and data acquisition. Secondly, two types of reactor neutron noise experiments were performed, and valid experimental data was obtained. Finally, time-frequency analysis was conducted on the experimental data, and effective analysis results were obtained in the low-frequency part. Through this work, it can be concluded that the time-frequency analysis technique can effectively investigate the core dynamics behavior and deepen the identification of the unstable core process.

• Steel and Composite Structures
• /
• v.42 no.3
• /
• pp.375-388
• /
• 2022

In this work, limit elastic speed analysis of functionally graded porous rotating disks has been reported. The work proposes an effective approach for modeling the mechanical properties of a porous functionally graded rotating disk. Four different types of porosity models namely: uniform, symmetric, inner maximum, and outer maximum distribution are considered. The approach used is the variational principle, and the solution has been achieved using Galerkin's error minimization theory. The study aims to investigate the effect of grading indices, aspect ratio, porosity volume fraction, and porosity types on limit angular speed for uniform and variable disk geometries of constant mass. To validate the current study, finite element analysis has been used, and there is good agreement between the two methods. The study yielded a decrease in limit speed as grading indices and aspect ratio increase. The porosity volume fraction is found to be more significant than the aspect ratio effect. The research demonstrates a range of operable speeds for porous and non-porous disk profiles that can be used in industries as design data. The results show a significant increase in limit speed for an exponential disk when compared to other disk profiles, and thus, the study demonstrates a range of FG-based structures for applications in industries that will not only save material (lightweight structures) but also improve overall performance.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.385-396
• /
• 2020

Teachers are facing various job demands with psychosocial aspects being fundamental due to the nature of the occupation. Although teachers' work is associated with different psychosocial health risks, little is known on how to identify and tackle those. Thus, a systematic literature search as per the PRISMA statement was conducted via MEDLINE (PubMed), PSYNDEX (PubPsych), and ScienceDirect. Two reviewers independently screened 2261 titles and abstracts and 169 full-texts. According to the inclusion criteria established a priori, articles from peer-reviewed journals (English or German) on psychosocial risk management in teachers were incorporated. Despite a comprehensive and sensitive search, only four publications could be identified, outlining a process to implement risk management and different assessment tools. Taken together, data presented in the articles were scarce. Recommendations for process steps and the assessment of psychosocial risks can be derived from the findings. To implement effective psychosocial risk management in the teaching profession, further research is needed, though. Effective and practicable approaches, which are accepted by the target group, should be further developed and investigated. Relevant causes of occupational strain in the teaching profession must be identified and assessed reliably. Low-threshold interventions should be implemented, and the outcome must be evaluated afterward.