• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.145-152
• /
• 2011

Mechanical and property corrosion resistance of Mg-Zn-Y alloys with an atomic ratio of Zn/Y of 6.8 are investigated using optical microscopy, scanning electron microscopy, transmission electron microscopy, uniaxial tensile test and corrosion test with immersion and dynamic potentiometric tests. The alloys showed an in-situ composite microstructure consisting of ${\alpha}$-Mg and icosahedral phase (I-phase) as a strengthening phase. As the volume fraction of the I-phase increases, the yield and tensile strengths of the alloys increase while maintaining large elongation (26~30%), indicating that I-phase is effective for strengthening and forms a stable interface with surrounding ${\alpha}$-Mg matrix. The presence of I-phase having higher corrosion potential than ${\alpha}$-Mg, decreased the corrosion rate of the cast alloy up to I-phase volume fraction of 3.7%. However further increase in the volume fraction of the I-phase deteriorates the corrosion resistance due to enhanced internal galvanic corrosion cell between ${\alpha}$-Mg and I-phase.

• 대한물리의학회지
• /
• 제16권3호
• /
• pp.55-64
• /
• 2021

PURPOSE: The purpose of this study was to apply dynamic neuromuscular stabilization (DNS) to subjects with forward head posture (FHP) and to compare its effects on respiratory function as against the conventional neck stabilization exercise and neck stretching and extensor strengthening exercises. METHODS: The whole-body posture measurement system was used to measure the degree of FHP, and a spirometer and a respiratory gas analyzer were used to measure the respiratory function. After the intervention was completed, the changes over time were analyzed in the DNS group, the neck stabilization exercise group, and the neck stretching and extensor strengthening exercise group. The inter-group difference in the changes was also analyzed. A repeated ANOVA was performed to compare the respiratory function according to the period between the three groups, and the least significant difference (LSD) method was used for the post hoc test. RESULTS: After the 6-week exercise period, respiratory functions, such as forced vital capacity (FVC), forced expiratory volume for 1 second (FEV1), forced expiratory volume for 1 sec/forced vital capacity (FEV1/FVC), maximum oxygen intake (VO₂max), and the volume of expired gas (VE), significantly improved according to the period (p < .05), but no inter-group differences were found. CONCLUSION: DNS is an effective training method, and can be applied along with neck stabilization exercise and neck stretching and extensor strengthening exercises, which are widely used in clinical practice, to people with FHP who cannot directly perform neck exercises to improve their respiratory function.

• 한국공간구조학회논문집
• /
• 제23권2호
• /
• pp.69-78
• /
• 2023

This paper investigates the effects of aspect ratio and volume fraction of hooked-end normal-strength steel fibers on the compressive and flexural properties of high-strength concrete with specified compressive strength of 60 MPa. Three types of hooked-end steel fibers with aspect ratios of 64, 67 and 80 were considered and three volume fractions of 0.25%, 0.50% and 0.75% for each steel fiber were respectively added into each high-strength concrete mixture. The test results indicated that the addition of normal-strength steel fibers is effective to improve compressive and flexural properties of high-strength concrete but fiber aspect ratio had little effect on the modulus of elasticity and compressive strength. As steel fiber content and aspect ratio increased, flexural beahvior of notched high-strength concrete beams was effectively improved.

• 소성∙가공
• /
• 제16권2호
• /
• pp.126-131
• /
• 2007

Voids in a large rotor are formed in solidification process of a cast ingot. The voids have to be eliminated from the rotor by a forming process, because they would became stress-intensity factors which suddenly fracture the rotor in the operation. Previous studies on void-elimination of a large rotor have mainly focused on finding the process variables affecting the void-closure. But the study on the amount of void closure in a large rotor has been very rare. This study was performed to obtain an equation which predicts the amount of void-closure in a forging process of a large rotor and to evaluate the availability of the void-closure equation through finite element analyses. Firstly, 2D FE analysis was carried out to find effects of time integral of hydrostatic stress and effective strain on void volume rate of a large rotor in the upsetting process for various diameters and shapes of void, and material temperature. From the 2D FE analysis, we found that effective strain was suitable for predicting the void-closure of a large rotor, because there was a constant relationship between void volume rate and effective strain. And a void-closure equation was proposed fur predicting void-closure of a large rotor in the upsetting process. Finally, ken the 3D FE analysis, the proposed void-closure equation was verified to be useful for upsetting and cogging processes.

• Computers and Concrete
• /
• 제18권3호
• /
• pp.319-336
• /
• 2016

In this study, both two- and three-dimensional (2D and 3D) finite-volume-based models were developed to analyze the heat transfer mechanisms through the porous structures of cellular concretes under steady-state heat transfer conditions and to investigate the differences between the 2D and 3D modeling results. The 2D and 3D reconstructed pore networks were generated from the microstructural information measured by 3D images captured by X-ray computerized tomography (X-CT). The computed effective thermal conductivities based on the 2D and 3D calculations performed on the reconstructed porous structures were found to be nearly identical to those evaluated from the 2D cross-sectional images and the 3D X-CT images, respectively. In addition, the 3D computed effective thermal conductivity was found to agree better with the measured values, in comparison with the 2D reconstruction and real cross-sectional images. Finally, the thermal conductivities computed for different reconstructed porous 3D structures of cellular concretes were compared with those obtained from 2D computations performed on 2D reconstructed structures. This comparison revealed the differences between 2D and 3D image-based modeling. A correlation was thus derived between the results of the 3D and 2D models.

• 대한한의학회지
• /
• 제23권1호
• /
• pp.156-169
• /
• 2002

Objectives : This experimental study was performed to prove the effect of Ikryung-Tang (yiling-tang; IRT) and Ikryung-tangkamibang (yiling-tangjiaweifang; IRT I, IRT II) on rats with nephrosis induced by a single intravenous injection of puromycin aminonucleoside (PAN). Methods : The effects of IRT, IRT I and IRT II on PAN nephrosis were evaluated by measuring the gene expression of IL-4, $IFN-{\gamma}$ and the concentrations of IgE, albumin, total protein, cholesterol, triglyceride, creatinine, and BUN in the serum and the volume & amount of protein of the 24hrs' urine. Results : In the gene expression linked T cell specialization, IRT II inhibited IL-4 and IgE but IRT and IRT I showed no significant difference compared with control group. On the other hand, IRT, IRT I and IRT II increased $IFN-{\gamma}$ compared with the control group. In the urine protein, serum albumin, total protein, BUN, and creatinine, IRT I especially showed more. significant effect than other groups. In the serum cholesterol and triglyceride, IRT II especially showed more significant effect than other groups. In the urine volume during 24 hrs, IRT especially showed more significant effect than other groups. Conclusions : According to the above results, it is suggested that IRT is effective for the treatment of edema, IRT I is effective for the treatment of hypoproteinemia and kidney dysfunction, IRT II is effective for immune modulation and the treatment of cholesteremia. Therefore IRT, IRT I and IRT II seem to be available for treating nephrosis in clinical practice.

• 대한핵의학회지
• /
• 제16권1호
• /
• pp.55-61
• /
• 1982

Biodistribution studies has been carried out to elucidate the cause of poor bone imagings often encountered in using $methylenediphosphonate(MDP)-^{99m}Tc$ and to establish effective conditions in using the popular bone imaging agent. After 150 minutes from the I.V. injection of $MDP-^{99m}Tc$ to mice, the radioactivities accumulated at bone(B), liver(L), and stomach(S) were counted. The radiochemical purity (RCP), the volume, the radioactivity concentration and the amount of radioactivity of $MDP-^{99m}Tc$ were controlled. Data were expressed either in %cpm/g organ or % cpm/organ. The organ distribution ratios(B/L and B/S) were correlated with the RCP, the volume of injection, the radioactivity concentration etc. Results indicated that the RCP plays a major role in biodistributions. High radioactivity concentration and injection of a small amount is recommended. Negligible effect was observed with the amount of radioactivity. It has been confirmed that the up-to-date methods of RCP determinations cannot sensitively detect the sharply affecting trace impurities. A particular biodistribution pattern of crossed B/L and B/S lines was observed in case of using $MDP-^{99m}Tc$ of low RCP. In such a case, rather a higher dosage would be effective for improving the contrast between bone and liver.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.968-978
• /
• 1999

The effective elastic properties of materials containing spherical inclusions were calculated by the elastic wave scattering theory. In the formulation additional scattering fields by the presence of random multiple scatterers that affects the effective properties were found by the single scattering approximation. In calculating the scattering fields the ensemble average on the displacements and strains inside the scatterer was found from the static approximation at long wavelength limit. The displacements were assumed to be equal to the incident field, while the strains were calculated by Eshelby's equivalent inclusion principle on the single inclusion problem. Four different models were considered and they reflected different degrees of multiple scattering effects based on the approximation introduced in the process of embedding the inclusion in the matrix. The expressions for the effective elastic constants were given in each model, and their relations to the results obtained from other scattering theory and elasticity theory were discussed. The theoretical predictions were compared with experimental results on the epoxy matrix composites containing tungsten particles of different sizes and volume fractions

• 대한방사선치료학회지
• /
• 제26권1호
• /
• pp.11-19
• /
• 2014

목 적 : 최적화 알고리즘에 적용되는 최적화 인자들의 영향을 고려하여, 가장 적합한 인자 값을 도출함으로써 이상적인 치료계획을 쉽게 설계할 수 있도록 하고자 한다. 대상 및 방법 : 본 연구의 세기조절방사선치료에서 선량계산 알고리즘은 PBC(Pencil Beam Convolution)이고, 최적화 알고리즘은 DVO(Dose Volume Optimizer 10.0.28)이다. 두경부 환자의 세기조절방사선치료에서 치료계획용적의 처방선량은 동시에 2.2 Gy와 2.0 Gy가 될 수 있도록 하였다. 치료계획은 6 MV, 7개의 조사야로 역선량계산방법으로 수립하였다. 최적화 알고리즘 인자는 용적선량-조건강도(Priority, Constrain), 선량부 드럼강도(Smooth)로 선정하고, 각 인자들의 변화량에 따른 치료계획의 영향을 분석하였다. 용적선량-조건강도는 기준 조건강도를 정하고, 비율은 같지만 절대 값은 다른 최적화 과정을 실시하였다. 또한 조건강도의 절대 값에 변화에 따른 치료용적과 주변 정상장기들을 평가하였다. 선량부드럼강도는 기준 조건의 단순 변화와 용적선량-조건강도와 관련시킨 변화를 치료계획에 반영시켰다. 치료계획은 처방선량지수(Conformal Index, CI), 처방선량포함지수(Paddick's Conformal Index, PCI), 선량균질지수(Homogeneity Index, HI)와 각 장기의 평균선량으로 평가하였다. 결 과 : 용적선량-조건강도의 비율을 동일하게 하고 절대 값을 변화 시켰을 때 CI값은 다르지만, PCI는 $1.299{\pm}0.006$, HI는 $1.095{\pm}0.004$, D5%/D95%는 $1.090{\pm}1.011$으로 처방선량에 대한 영향은 유사하였다. 이하선의 평균선량은 용적선량-조건강도의 절대 값이 40, 60, 70, 90으로 증가될 때, 67.4, 50.3, 51.2, 47.1 Gy로 감소하였다. 각각의 치료계획에서 선량부드럼강도를 증가시켰을 때, PCI는 $1.338{\pm}0.006$로 증가된 값을 보였다. 결 론 : 용적선량-조건강도는 절대적인 값보다 각 조건의 비율에 따라 최적화 알고리즘에 영향을 주었다. 절대 값이 다르더라도 같은 비율을 유지하면 유사한 치료계획이 수립되었다. 성공적인 치료계획을 수립하기 위해 특히 보호해야할 정상장기의 용적선량-조건강도는 치료용적의 용적선량-조건강도의 50%이상 되어야한다. 선량부드럼강도는 용적선량-조건강도에 따라 비례하여 증가하거나 감소하여야 한다. 단순히 절대 값으로 적용하면 용적선량-조건강도는 그 조건을 충분히 만족시키지 못한다.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.197-204
• /
• 2004

An accumulator in hydraulic systems stores kinetic energy during braking action, and then that controls hasty surge pressure. An energy recovery system using accumulator seems to be advantageous for ERBS due to its high energy density. This study suggests a method to decide suitable accumulator volume for ERBS. The method is based upon energy conservation between kinetic energy of moving inertia and elastic energy of accumulator. The energy conversion was analyzed and a simple formula was derived. Also accumulator tests were conducted for different load mass and motor speed. A series of test work were carried out in the laboratory and the dynamic characteristics of the hydraulic motor system, such as the surge pressure and response time, were investigated in both brake action and acceleration action and these results show that the proposed design is effective for decision accumulator volume in ERBS.