• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.206-213
• /
• 2003

Laboratory testing of representative rock specimens is of fundamental necessity for the successful design and/or assessment of facilities associated with many kinds of underground exploitation, including the geological disposal of radioactive nuclear waste. As a fundamental and systematic study, a series of measurements of the physical, mechanical and hydraulic properties of Inada granite and Shirahama sandstone, two rock types that are widely available in Japan, have been performed. This paper presents the results of a study of the effective porosity, density, compressive and shear wave velocity, unconfined compressive strength and permeability of the two rocks. The anisotropy and the effects of confining pressure on the permeability of the rocks, as well as the relationships among the physical, mechanical and hydraulic properties, are also investigated and discussed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.594-596
• /
• 2007

Using an oedometer cell instrumented to measure the evolution of electromagnetic properties, small strain stiffness, and temperature, we conducted consolidation tests on four types of sediments. The tested specimens include sediments with different gas hydrate saturation at four stages of loading. The test results show that the electromagnetic and mechanical properties of hydrate-bearing marine sediments are governed by the vertical effective stress, stress history, porosity, hydrate saturation, fabric, ionic concentration of the pore fluid, and temperature. The results also show that permittivity and electrical conductivity data can be combined to estimate hydrate volume fraction in laboratory sediments, methodology that might eventually be extended for estimation of hydrate concentrations in field settings.

• 분석과학
• /
• 제5권2호
• /
• pp.217-222
• /
• 1992

수은침투법을 이용하여 AIN의 이장성형체와 건조가압성형체의 기공구조 해석을 시도하였다. 좁은 기공크기 분포와 높은 충진밀도를 가진 이장성형체에서 소결도가 높고 2차상의 분포가 균일하였다. 수은침투법에 의한 기공크기 분포 해석은 잉크병 현상이 없을 때만 유효하지만 정량미시 분석과의 비교결과 기공률의 측정은 개기공 상태이면 유효함을 보였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1372-1377
• /
• 2008

Since metallic foam will increase the performance of heat exchanger, it have caused many researcher's attention recently. Our research base on the model that metallic foams applied to heat exchanger. In this case, there is three kind of heat transfer mechanisms, heat conduction in fibers, heat transfer by conduction in fluid phase, and internal heat change between solid and fluid phases. In this paper, we first discuss the acceptance of applying thermal equilibrium among the two phases. then to calculate the dimensionless temperature profile along 7 metallic foams. The 7 samples have different characteristics, such as area ratio, effective conductivity, porosity, etc.

• Archives of Pharmacal Research
• /
• 제2권1호
• /
• pp.17-24
• /
• 1979

A first systematic approach on new and simple preparation method of spherical granules in the system using organic granulating solution was carried out. Mixer granulation required narrow range of moisture content but gentle action of tumbling in the mixer and capilary forces were adequate to compact the porous mass and also were highly effective to produce granules close to sphere. Where the granules by massing and screening provided the more open structure, its pore distribution lied between 71 and 16 .mu.m by above 50% and on the contrary, that of the mixer granulated granules showed only below 25%. Increase in retention time in the mixer decreased the intragranular porosity of granules produced, and in comparison with granular particles produced by conventional wet granulation, those from the mixer granulation had the advantages of flow properties, packing characteristics and definite spherocity. They also had extremely low friability resulting in few fines.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.200-201
• /
• 2013

This study is interested in manufacturing the concrete surface impregnants including tetra ethyl ortho silicate, alkali silicate for the repair of the exposed concrete and the color concrete requiring the advanced function in view of the concrete appearance. The surface layer change and porosity properties was tested for the review of application. The result of this study show that the effective silicate are tetra ethyl ortho silicate and alkali silicate t. The adhesion in tension is slightly increased but the reinforcement of concrete substrate is slight. So, the concrete impregnant of this study is more desirable for the improvement of durability rather than the reinforcement.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.660-664
• /
• 2000

Effect of various kinds of additive such as AlOOH, Al(OH)3, Al2Si2O5(OH)4, Nb2O5, TiO2 and MgO on the properties and microstructures of UO2 pellet has been examined. All the tested dopants had played a role to reduce sintered density and open porosity. It was revealed that the addition of TiO2 made pellet more stable thermally. UO2 pellet doped with 0.2wt% TiO2 was swelled rather than densified after annealing for 24 hrs at 1$700^{\circ}C$. It was attributed to large pore with spherical shape. Titinia and silicon coexisted with Al element were more effective to increase grain size than other additives. It could be also revealed that the formation of liquid phase was the main cause of grain growth.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1680-1690
• /
• 2006

As a promising and novel manufacturing technology, laser aided direct metal deposition (DMD) process produces near-net-shape functional metal parts directly from 3-D CAD models by repeating laser cladding layer by layer. The key of the build-up mechanism is the effective control of powder delivery and laser power to be irradiated into the melt-pool. A feedback control system using two sets of optical height sensors is designed for monitoring the melt-pool and real-time control of deposition dimension. With the feedback height control system, the dimensions of part can be controlled within designed tolerance maintaining real time control of each layer thickness. Clad nugget shapes reveal that the feedback control can affect the nugget size and morphology of microstructure. The pore/void level can be controlled by utilizing pulsed-mode laser and proper design of deposition tool-path. With the present configuration of the control system, it is believed that more innovation of the DMD process is possible to the deposition of layers in 3-D slice.

• 한국해양공학회지
• /
• 제35권2호
• /
• pp.113-120
• /
• 2021

In order to perform a precise wave tank experiment, it is necessary to maintain the incident wave generated by the wavemaker in a steady state and to effectively remove the reflected waves. In this paper, a combined sloping-wall-type punching plate wave absorber was proposed to attenuate reflected waves effectively in a two-dimensional mini wave tank. Using the four-point reflection separation method, the reflected waves were measured to determine the reflection coefficients. Experiments were conducted under various punching plate porosities, sloping plate angles, and incident wave conditions to evaluate the performance of the combined punching plate wave absorber. The most effective wave absorbing performance was achieved when the porosity was 10% and the inclination angle of the punching plate was 18.6° under the present condition. It was also found that the installation of the sloping plate could improve the wave attenuation performance by generating the shoaling effect of the incident wave.

• Environmental Engineering Research
• /
• 제24권1호
• /
• pp.99-106
• /
• 2019

Using the abandoned agricultural by-product corncobs, the most commonly used methylene blue (MB) dyestuffs were removed. This experiment is very meaningful because it is the recycling of resources and the use of environmentally friendly adsorbents. According to the Hauser ratio and porosity analysis, the corncob has a good flow ability of the adsorbent material and many pores, which is very advantageous for MB adsorption. As a result of the experiment, MB concentration of less than 0.005 g/L was very efficiently removed with 10 g/L of bioadsorbent corncob and the maximum adsorption capacity of corncob for MB dyes was obtained at 417.1 mg/g. In addition, adsorption process of MB onto corncob was a physical process according to adsorption energy analysis. Corncob can efficiently and environmentally remove MB in aqueous solution, and is very cost effective and can recycle the abandoned resources.