• Environmental Engineering Research
• /
• 제11권4호
• /
• pp.201-207
• /
• 2006

A simple empirical model with good quantitative prediction of inter-particle and intra-particle distance in a cake layer with respect to ionic strength was developed. The model is an inverse length scale with functions of interaction energy and hydrodynamic factor and it explains that the inter-particle and intra-particle distance in a cake is directly related to the effective size of particles. Particle compressibility with respect to ionic strength was also predicted by the model. The model corroborated very well with experimental results of polystyrene microsphere latex particles microfiltation in a dead end operation. From the results of the model, specific cake resistance could be controlled by the same variables affecting the height of particle energy barrier described by the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory.

• 열처리공학회지
• /
• 제3권4호
• /
• pp.10-22
• /
• 1990

A study has been investigated on the effect of mechanical properties (tension strength, rotary bending fatigue strength, wear resistance, hardness) according to the carbide particle size variation by the treatment of 1) quenching tempering, and 2) quenching, subzero treatment and tempering. The material used in this investigation was a typical bearing steel, high C high Cr, AISI E 52100. The result obtained in this study were as follows : (1) Finer the carbide particle size increasing the hardness and retained austenite in same quenching condition. (2) Finer the carbide particle size reduced the tension and rotary bending fatigue which were resulted from austenite grain growth and carbide precipitation on grain boundry that induced by carbide refine heat treatment. (3) Finer the carbide particel size increasing the wear resistance which were resulted by uniform distribution of carbide and increased hardness induced by microstructural uniform hardenability of matrix. (4) When the carbide particles were refinded, subzero treatment is effective only wear resistance and hardness.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.664-667
• /
• 2001

Segregation of binary particle systems in a horizontally gyrated bed has been experimentally studied to recover the heavy metals from municipal waste incineration (MWI) ash. Differences in density and size had less effect on segregation. Effective segregation took place under the centrifugal effect of 1 or less for any particle size ratio. Zn, Cu and Pb were concentrated in the upper side of bed by the horizontal vibration. However, there was less change in concentration for other metals such as Mg, Al and Fe etc. The separation system with the horizontal gyrating separator proved to be an effective method for the pretreatment of recovering Zn, Cu and Pb from incineration residues.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 제2회 단조심포지엄 단조기술의 진보
• /
• pp.100-123
• /
• 1995

The relationship between plastic deformation and crystal grain change in warm forging processes of SM100 carbon steel is studied. If the carbon steel is deformed in warm forging temperature (about recrystallization range), the crystal grain and cementite of the internal part are changed, so material properties are changed. Some experimental values, such as the elliptic degree of cementite, the grain size of cementitie and ferrite grain size, are investigated. When the plastic deformation proceeds, the elliptic degree of cementite becomes large, the grain size of cementite particle is small, and the size of ferrite grain appears fine by recrystallization. The elliptic degree of cementite has a considerable effect on formability. The distribution of effective strain in the forging is calculated by the rigid visco-plastic FEM analysis. The effective strain distribution obtained from the FEM simulation is compared with the experimental result. At effective strain 0.3 dynamic recovery and dynamic recrystallization begin, over 2.5 the organization of material has better quality that is suitable for the following cold forming.

• Smart Structures and Systems
• /
• 제11권1호
• /
• pp.103-122
• /
• 2013

It is essential to update the model with reflecting observation or inspection data for reliability estimation of existing structures. Authors proposed updated reliability analysis by using Particle Filter. We discuss how to apply the proposed method through numerical examples on reinforced concrete structures after verification of the method with hypothetical linear Gaussian problem. Reinforced concrete structures in a marine environment deteriorate with time due to chloride-induced corrosion of reinforcing bars. In the case of existing structures, it is essential to monitor the current condition such as chloride-induced corrosion and to reflect it to rational maintenance with consideration of the uncertainty. In this context, updated reliability estimation of a structure provides useful information for the rational decision. Accuracy estimation is also one of the important issues when Monte Carlo approach such as Particle Filter is adopted. Especially Particle Filter approach has a problem known as degeneracy. Effective sample size is introduced to predict the covariance of variance of limit state exceeding probabilities calculated by Particle Filter. Its validity is shown by the numerical experiments.

• 한국재료학회지
• /
• 제21권3호
• /
• pp.156-160
• /
• 2011

FePt nanoparticles suspension was synthesized by reduction of platinum acetylacetonate and decomposition of iron pentacarbonyl in the presence of oleic acid and oleyl amine. FePt nanoparticles were coated on a substrate by convective assembly from the suspension. To prevent the coalescence during the annealing of FePt nanoparticles double convective coatings were tried. First convective coating was for silica particle assembly on a silicon substrate and second one was for FePt nanoparticles on the previously coated silica layers. It was observed by scanning electron microscopy (SEM) that FePt nanoparticles were dispersed on the silica particle surface. After annealing at $700^{\circ}C$ for 30 minutes under nitrogen atmosphere, FePt nanoparticles on silica particles were maintained in a dispersed state with slight increase of particle size. On the contrary, FePt nanoparticles that were directly coated on silicon substrate showed severe particle growth after annealing due to the close-packing of nanoparticles during assembly. The size variation during annealing was also verified by X-ray diffractometer (XRD). It was suggested that pre-coating, which offered solvent flux oppose to the capillary force between FePt nanoparticles, was an effective method to prevent coalescence of nano-sized particles under high temperature annealing.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.81-84
• /
• 1997

The hot deformation behavior of SiCp/AA2024 composites reinforced with different sizes of SiCp reinforcements (1, 8, 15, 36, and 44${\mu}{\textrm}{m}$) was investigated by hot torsion tests. The hot restoration of the composites depending on the SiCp reinforcements particle size was studied from the effective stress - strain curves. Dynamic recrystallization (DRX) was occurred in the SiCp/AA2024 composites during the hot deformation at 320 - 43$0^{\circ}C$ under a strain rate of 1.0/sec. Also, the critical strain for DRX decreased with decreasing the reinforcement size of SiCp from 44 to 8${\mu}{\textrm}{m}$. The composite reinforced with SiCp of 8${\mu}{\textrm}{m}$ showed the highest flow stress (265 MPa) and the work hardening rate at 32$0^{\circ}C$ under a strain rate of 1.0/sec.

• Transactions on Electrical and Electronic Materials
• /
• 제2권3호
• /
• pp.18-23
• /
• 2001

For the piezoelectric transformer application, Pb(Sb$\_$1/2/ Nb$\_$1/2/)O$_3$-Pb(Zr,Ti)O$_3$ ceramics were produced by attrition milling. Microstructural, dielectric and piezoelectric characteristics of the ceramics were investigated as a function of milling time. The particle size and grain size decreased while dielectric constant, density and mechanical quality factor (Q$\_$m/) increased with milling time. Temperature coefficient of resonant frequency (TCf$\_$r/) was shifted to positive side with increasing milling time. The attrition milling process proved to be one of the effective routes to produce transformers for high power application.

• 유기물자원화
• /
• 제23권4호
• /
• pp.52-62
• /
• 2015

본 연구에서는 퇴비화공정에서 첨가재로 주로 사용되는 톱밥을 대상으로 톱밥 내 공기투과성 변화에 영향을 미치고 있는 요인별 특성과 총차감압력에 미치는 기여도를 평가하였다. 공기투과성 변화에의 영향요소로서 층류속도(v), 난류속도($v^2$), 수분함량(MC*v), 공기공극률(AFP*v), 입자크기(SIZE*v)를 선정하여 차감압력 산정을 위한 회귀식을 제시하였다. 차감압력에의 증가요인은 층류속도(v)와 입자크기(SIZE*v)이며, 감소요인은 난류속도($v^2$), 수분함량(MC*v), 공기공극률(AFP*v)이다. 공기유입속도를 높이면 총차감압력이 지속적으로 증가하였으며, 이러한 총차감압력 변화에 영향을 크게 미치는 증가요인은 입자크기(SIZE*v)이며, 감소요인은 공기공극률(AFP*v)이다. 또한 총차감압력에의 증가기여도는 낮은 유속에서는 층류속도(v)가 높은 유속에서는 입자크기(SIZE*v)의 기여도가 높았으며, 감소기여도는 공기공극률(AFP*v)이 가장 높았다. 반면에 수분함량 변화에 따른 총차감압력 변화는 그리 크지 않았다. 따라서 총차감압력은 증가요인보다는 감소요인인 공기공극률(AFP*v)과 수분함량(MC*v)에 의하여 영향을 받고 있음을 알 수 있다. 본 연구결과로서, 효율적 퇴비화공정을 위하여는 적정 수분함량 유지와 함께 공기공극률이 높은 첨가재를 선정하여 공기투과성을 향상시키는 방법이 적절할 것이다.

• 한국결정성장학회지
• /
• 제22권5호
• /
• pp.247-253
• /
• 2012

본 연구에서는 zirconium diboride($ZrB_2$)의 소결성 향상을 위해 두 가지 전처리 공정을 사용하였다. 물리적 전처리 공정으로 SPEX mill을 사용하여 as-received $ZrB_2$ powder의 입도를 $2.61{\mu}m$에서 $0.35{\mu}m$까지 감소시킬 수 있었다. 화학적 전처리 공정으로 희석된 불산 용액을 사용하여 $ZrB_2$ powder의 산화도를 4.20 wt%에서 2.22 wt%까지 감소시킬 수 있었다. 소결된 $ZrB_2$의 상대 밀도는 입도와 산화도가 감소함에 따라 증가하였다. $ZrB_2$의 치밀화에는 산화도 보다 입도의 영향이 더 크다는 것을 확인하였다. 두 가지 전처리 공정을 통해 소결 조제의 사용 없이 치밀한 $ZrB_2$ 소결체를 제조하였다. 물리적 화학적 전처리 공정을 사용함으로써 $ZrB_2$의 소결성을 향상시킬 수 있었다.