• Journal of Korean Society on Water Environment
• /
• v.28 no.1
• /
• pp.18-25
• /
• 2012

For effective watershed management, it is very important to select the tributaries through selection and concentration of targeted tributary catchments for improving water quality within the limited financial conditions. This study introduced the selection and diagnosis procedure of tributary catchments for improving water quality at Chungcheongnam-do based on water quality and flowrate monitoring, stream grouping method. The tributaries with high value of water quality and flowrate were selected for improving water quality according to stream grouping method. The diagnosis of selected tributaries for improving water quality was performed with analysis of the pollution load (generated, discharged, delivered) and point source discharged pollution load density. The plans for improving water quality of tributaries were suggested thorough various diagnosis of tributary catchments. For improving water quality of tributaries in Chungcheongnam-do, the tributary catchments in the Dangjin, Asan, Yesan, Cheonan, Hongseong area should be preferentially considered. The water quality improving plans for those tributary catchments, in accordance with the reduction of sources of pollution by population and livestock, should be established.

• Geomechanics and Engineering
• /
• v.7 no.2
• /
• pp.201-212
• /
• 2014

Due to the sea-crossing bridge span is generally large and main pier pile foundations are located in deep water and carry large vertical load, sea-crossing bridge main pier pile foundations bearing mechanism and load deformation characteristics are still vague. Authors studied the vertical bearing properties of sea-crossing bridge main pier pile foundations through pilot load tests. Large tonnage load test of Qingdao Bay Bridge main pier pile program is designed by using per-stressed technique to optimize the design of anchor pile reaction beam system. Test results show that the design is feasible and effective. This method can directly test bearing capacity of main pier pile foundations, and analysis bearing behaviors from test results of sensors which embedded in the pile. Through test study the vertical bearing properties of main pier pile foundation and compared with the generally short pile, author summarized the main pier pile foundations vertical bearing capacity and the main problem of design and construction which need to pay attention, and provide a reliable basis and experience for sea-crossing bridge main pier pile foundations design and construction.

• KIEE International Transactions on Power Engineering
• /
• v.4A no.2
• /
• pp.73-78
• /
• 2004

This paper proposes a framework for determining the minimum load shedding for restoring solvability. The framework includes a continuation power flow (CPF) and an optimal power flow (OPF). The CPF parameterizes a specified outage from a set of multiple contingencies causing unsolvable cases, and it traces the path of solutions with respect to the parameter variation. At the nose point of the path, sensitivity analysis is performed in order to achieve the most effective control location for load shedding. Using the control location information, the OPF for locating the minimum load shedding is executed in order to restore power flow solvability. It is highlighted that the framework systematically determines control locations and the proper amount of load shedding. In a numerical simulation, an illustrative example of the proposed framework is shown by applying it to the New England 39 bus system.

• Journal of Biomedical Engineering Research
• /
• v.28 no.1
• /
• pp.8-16
• /
• 2007

Finite element analysis (FEA) is an effective means for the analysis of bioelectromagnetism. It has been successfully applied to various problems over conventional methods such as boundary element analysis and finite difference analysis. However, its utilization has been limited due to the overwhelming computational load despite of its analytical power. We have previously developed a novel mesh generation scheme that produces FE meshes that are content-adaptive to given MR images. MRI content-adaptive FE meshes (cMeshes) represent the electrically conducting domain more effectively with far less number of nodes and elements, thus lessen the computational load. In general, the cMesh generation is affected by the quality of feature maps derived from MRI. In this study, we have tested various feature maps created based on the improved differential geometry measures for more effective cMesh head models. As performance indices, correlation coefficient (CC), root mean squared error (RMSE), relative error (RE), and the quality of cMesh triangle elements are used. The results show that there is a significant variation according to the characteristics of specific feature maps on cMesh generation, and offer additional choices of feature maps to yield more effective and efficient generation of cMeshes. We believe that cMeshes with specific and improved feature map generation schemes should be useful in the FEA of bioelectromagnetic problems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.88-95
• /
• 2007

Korea is highly dependent on foreign countries for energy while at the same time having a high energy-consumption industrial structure. Therefore, logical improvements in energy use efficiency and nationwide energy saving are becoming more and more important in coping with the worldwidehigh oil prices and environmental issues such as listed in the Kyoto Protocol to the United Nations Framework Convention on Climate Change. Consequently, a study was conducted on the average annual load factor in domestic areas to set a reasonable and reliable technology standard plan for high-efficiency transformers. The average annual load factor in Korea was discovered to be 18.4[%] classified by industry. This factor is expected to be used in arranging a domestic standard for a minimum efficiency system for transformers, and in reviewing and supplementing the standard transformers plan for the High Energy-Efficiency Appliance Certification. The expected effect from the establishment of the technology standards plan for highly efficient transformers is the expansion of the manufacturing and distribution of highly efficient transformers that are suitable for domestic use. These will lead to electricity cost savings for users, strengthening the related industries' market competitive powers and the effective reduction of greenhouse gases on a national level by drastically reducing loss from transformers, which accounts for a large portion of the total electric supply losses.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1921-1930
• /
• 1997

This paper presents the effective technique to design a six-axis load cell by using experimental design with an orthogonal array. A binocular structure is used as a basic sensing element for a load cell instead of the parallel plate structure. The finite element method is adopted to obtain strain distributions of the sensing element, and by doing the analysis of variances, its results are utilized in determining the factor which is more influential to the output strain. Calibration test results show that the developed six-axis loa cell with the maximum capacities of 196 N in forces and 19.6 N. m in moments is evaluated to be useful with the coupling error less than 2.5%.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.6
• /
• pp.2643-2646
• /
• 2012

Objectives: Human papillomavirus (HPV) is the major etiological agent of cervical cancer, a leading cause of morbidity and mortality in women worldwide. Screening strategies for reducing the burden of HPV-mediated carcinogenesis are emerging as an effective means for cervical cancer control and prevention in developing countries. Our study, therefore, aimed to identify HPV infection status in North Indian women during random population screening. Methodology: Cervical/vaginal exfoliated cells and/or Pap smear specimens were collected from 890 women of North Indian ethnicity residing in Lucknow and adjoining areas, during random population screening from June 2009-March 2012. HPV viral loads in clinical specimens were determined by the Hybrid Capture (hc)-2 HPV DNA assay, and subsequently, positive/negative/borderline HPV status was calculated. Results: The HPV incidence in the present study was 11.7%. 751 out of a total of 890 women (84.4%) participating in our HPV screening program were HPV negative (HPV -), 104 (11.7%) tested positive (HPV +) while 35 (3.9%) showed borderline (HPV $^*$) infection status. Furthermore, in the HPV + subjects (N=104), 18 (17.3%) showed strong positivity. We observed that HPV positivity tends to increase with age in North Indian women; the higher the viral load with increasing age, higher is the susceptibility to HPV-mediated cervical cancer. Conclusions: HPV viral load/genotyping may help in identifying women at risk of developing cervical cancer. However, cost-effective HPV screening protocols with a wider population coverage are warranted so as to reduce the burden of cervical cancer in women worldwide in the vaccine-era.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1039-1046
• /
• 2022

After the COVID-19 pandemic, the spread of the untact culture and the Fourth Industrial Revolution, which generates various types of data, generated so much data that it was not compared to before. This led to higher data throughput, revealing little by little the limitations of the existing network system centered on vendors and hardware. Recently, SDN technology centered on users and software that can overcome these limitations is attracting attention. In addition, SDN-based load balancing techniques are expected to increase efficiency in the load balancing area of the server cluster in the data center, which generates and processes vast and diverse data. Unlike existing SDN load distribution studies, this paper proposes a load distribution technique in which a controller checks the state of a server according to the occurrence of an event rather than periodic confirmation through a monitoring technique and allocates a user's request by weighting it according to a load ratio. As a result of the desired experiment, the proposed technique showed a better equal load balancing effect than the comparison technique, so it is expected to be more effective in a server cluster in a large and packet-flowing data center.

• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.73-78
• /
• 2014

Recently, Free cooling system usage has increased at many buildings in intermediate and winter season. Free cooling system is used to reduce the energy consumption of refrigeration in that season. Free cooling system is refrigeration system using cooled water. In general, this system is applied with the building having refrigeration load at all time such as a data center. In this study, energy consumption of a data center taking free cooling system in Ulsan was evaluated by the software HYSYS. the main result is as in the following : free cooling system is effective from January to April and from November to December. In case of Ulsna in 2013, using free coolng system is able to spend refrigeration energy of about 15% less than existing system. According to this result, it is appropriated that free cooling system is used in building having refrigeration load at all time such as data center.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.7
• /
• pp.956-961
• /
• 2014

Due to the increasing needs of anti-fall device for elderly, it is required to develop the test rigs for fall simulation. The femoral bone model consists of silicone and steel is used as an effective device to simulate falls. In this work, we propose five different femoral bone models and analyse them by using a commercial FEA tool. It has been shown that two kinds of simplified models exhibit the simulated side falls with an error range of ~1% in the impact load of femoral neck compared with full model. Especially, the upper tissue model is found to provide us with the best efficient test environment, attributable to its simple structure.