• 제목/요약/키워드: Effective compression ratio

검색결과 197건 처리시간 0.025초

필터형 진공압밀공법을 이용한 고함수비 점토지반의 개량효과 (The Effects of Improvement in Clay with High Moisture Contents Using the Filter Type Vacuum Consolidation Method)

  • 오세욱
    • 한국지반환경공학회 논문집
    • /
    • 제11권9호
    • /
    • pp.55-60
    • /
    • 2010
  • 필터형 배수재와 진공압을 이용하여 고함수비 점성토의 고화처리와 사면이나 터널의 수평배수를 촉진하여 지반을 안정화하는 공법을 개발하기 위하여 실내모형 시험을 수행하였다. 모형토조는 직경 1.5m, 높이 50cm로 제작하였으며, 토조하부는 사전압밀을 위한 배수구 및 개폐장치, 간극수압계를 설치하였고, 상부에는 침하계를 설치하여 시간별 침하를 계측할 수 있도록 제작하였다. 모형지반은 카오리나이트와 벤토나이트를 9:1의 비율로 130%의 함수비 상태에서 혼합 교반하여 박층으로 다져가면서 조성하였으며, 토조 중심부에 필터형 배수재를 설치하고 상부 캡에 호스를 연결하여 0.8MPa의 진공압을 가한 다음 1시간 간격으로 침하를 측정하였다. 실험종료 후 위치별로 함수비를 측정하고 불교란 시료의 삼축압축시험을 수행하여 지반의 강도증가 효과를 검증하였다. 11일 경과 후 침하는 최대 35mm, 함수비는 최대 38% 감소하였으며, 강도는 5~8배정도 증가하는 것으로 나타났다.

고강도 폴리머 콘크리트 휨부재의 응력블럭 (Stress Block of High Strength Polymer Concrete Flexural Members)

  • 김관호;김남길;연규석
    • 콘크리트학회논문집
    • /
    • 제14권5호
    • /
    • pp.638-644
    • /
    • 2002
  • 본 연구에서는 압축강도 1400 kgf/$\textrm{cm}^2$ 를 갖는 불포화 폴리에스터 폴리머 콘크리트를 이용하여 제작한 C형 시험체에 대한 편심압축 시험을 통하여 폴리머 콘크리트 휨부재의 응력-변형률 관계를 구명하고 등가직사각형 응력블럭의 파라미터 $\alpha$, $\beta$1, ${\gamma}$를 산출하였다. 아울러 인장철근비를 달리하는 5종의 전단스팬비 4.0인 철근 보강 폴리머 콘크리트 보에 대한 휨시험에서 얻어진 극한모멘트 시험값과 C형 시험체 응력-변형률 곡선에서 산출되는 파라미터 $\alpha$=0.61, $\beta$1=0.73 를 이용하여 계산된 이론적인 극한모멘트 값을 비교하여 보았던 바, 인장철근비가 0.50 $\rho$b 이상일때 시험값과 이론값이 비교적 잘 부합됨을 확인 할 수 있었다. 그러나 폴리머 콘크리트 휨 부재에 대한 보다 정확한 설계기준의 마련을 위해서는 압축강도와 크기를 변수로 하는 C형 시험체에 대한 보다 많은 시험을 통한 파라미터의 체계적인 연구가 필요하다.

소각장애시의 치환에 따른 고로슬래그 미분말 다량치환 순환골재 콘크리트의 특성 (Properties of High Volume Blast Furnace Slag Concrete using Recycled Aggregate with Incineration Waste Ash)

  • 한천구;이향재;김준호
    • 한국건설순환자원학회논문집
    • /
    • 제1권2호
    • /
    • pp.107-113
    • /
    • 2013
  • 연구에서는 문제시 되는 순환자원의 종류를 상호 보완적으로 활용하여 문제를 해결하고자하는 연구이다. 즉, 고로슬래그 미분말(BS)의 잠재 수경성반응을 순환 잔 굵은 골재의 알칼리로 반응시키고, 부족분의 알칼리를 보통포틀랜드 시멘트(OPC)로 해결하면서 소석회 처리된 소각장애시(WA)의 치환율을 실험변수로하여 최적치를 구하고자 실험하였다. 실험결과 WA 치환율이 증가할수록 유동성과 공기량은 약간 저하하고, 염화물량은 증가하여 불리하였지만 압축 및 인장강도가 1% 에서 최대 값을 나타내어 폐기물 유효처리 관점까지도 고려하면 WA 1% 혼합이 최적인 것으로 분석되었다.

복합판으로 보강된 철근콘크리트 기둥의 내진성능연구 (Earthquake-Resistant Capacity of RC Columns Retrofitted by Fiber-Steel Composite Plate)

  • 박태만;박성민;홍혁준;강경수;윤정배
    • 콘크리트학회논문집
    • /
    • 제17권1호
    • /
    • pp.113-120
    • /
    • 2005
  • 본 연구의 목적은 기둥의 내진성능을 개선하기 위한 연구로서, 섬유-강판이 복합된 보강재를 사용하여 보강기둥의 내력특성을 연구하였다. 이용 가능한 복합판의 보강량을 선정하고, 기존의 탄소섬유와 강판으로 보강한 기둥과 함께 밴드형 보강실험체를 제작하여 일정축력을 받는 기둥에 반복횡하중을 가하여 하중, 변의 및 연성도를 조사하였다. 내진성능의 척도가 되는 변위연성도, 에너지연성도, 누적소산에너지 및 감쇠비를 비교하여 복합판을 사용한 부재의 내력특성을 평가하였다. 연구결과, 복합판을 사용하여 기둥을 보강할 경우에도 다른 보강방법과 같이 양호한 내진성능을 확보할 수 있었다. 또한, 밴드형식으로 보강한 보강실험체의 연성능력은 모두 양호한 편이나, 최대하중 증가를 위해서는 일정량 이상의 보강량이 필요한 것으로 나타났다. 연성도 평가로는 에너지연성도가 변위연성도에 비하여 보강기둥의 연성능력을 잘 나타내었다.

토목섬유 보강점성토의 응력~변형특성에 미치는 초기응력비의 영향 (The Influence of Initial Stress Ratio on the Stress~Strain Characteristics of Geosynthetics Reinforced Clayey Soil)

  • 이재열;이광준;김유성
    • 한국지반공학회논문집
    • /
    • 제18권5호
    • /
    • pp.169-178
    • /
    • 2002
  • 토목섬유 보강점성토의 응력~변형특성을 삼축압축시험을 통하여 조사하였다. 모든 시험은0.05kgf/$cm^2$의 낮은 응력 증분으로 필요한 유효응력 수준까지 등방압밀 혹은 이방압밀한 후 배수조건으로 수행되었다. 보강토벽, 보강토교대, 보강성토와 같은 토류 구조물의 경우 일반적으로 이방응력 상태에 있으며, 이방압밀 배수전단시험의 경우 이러한 현장조건을 재현하기 위한 것이다. 일련의 시험결과로부터 이방압밀 보강점성토의 거동은 등방압밀 보강점성토의 응력~변형특성과 매우 상이한 것으로 나타났다. 특히, 이방압밀 보강점성토의 초기변형계수의 경우 등방압밀의 경우에 비하여 현저히 높은 것으로 나타났다. 또한, 등방압밀의 경우(약 1.0~5.0%)에 비하여 이방압밀의 경우 매우 낮은 축변형률(0.01%)에서 보강효과가 발생하였다.

흑연과 CNT 복합체를 압저항체로 하는 PDMS 기반의 바람저항형 유속센서 개발 (Development of PDMS-based Drag Force-type Flowmeter with Graphite-CNT Composite as Piezoresistive Material)

  • 박상준;신민기;김노연;이상훈
    • 센서학회지
    • /
    • 제32권1호
    • /
    • pp.44-50
    • /
    • 2023
  • In this study, a polydimethylsiloxane (PDMS)-based drag force-type flowmeter was fabricated using a graphite-carbon nanotube (CNT) composite as a piezoresistive material and evaluated. The device was in the form of a cantilever, which was composed of the soft material, PDMS, and fabricated using a mold manufactured by a three-dimensional printer. The cost-effective graphite was mixed with CNTs to serve as a piezoresistive material. The optimal mixing ratio was investigated, and the piezoresistive material formed using a graphite:PDMS:CNT ratio of 1.5:1:0.01 was adopted, which showed a stable output and a high sensitivity. Various forward and backward air flows in the range of 0-10 m/s were measured using the fabricated flowmeter, and both tensile and compression characteristics were evaluated. The measured results showed a stable output, with the resistance change gradually increasing with the air flow rate. Repeatability characteristics were also tested at a repeated air flow of 10 m/s, and the flowmeter responded to the applied air flow well. Consequently, the fabricated device has a high sensitivity and can be used as a flowmeter.

1.9wt%C 초고탄소 워크롤 단조 공정 : Part II - 기공압착 및 확산접합 (Forging of 1.9wt%C Ultrahigh Carbon Workroll : Part II - Void Closure and Diffusion Bonding)

  • 강성훈;임형철;이호원
    • 소성∙가공
    • /
    • 제22권8호
    • /
    • pp.463-469
    • /
    • 2013
  • In the previous work, a new forging process design, which included incremental upsetting, diffusion bonding and cogging, was suggested as a method to manufacture 1.9wt%C ultrahigh carbon workrolls. The previous study showed that incremental upsetting and diffusion bonding are effective in closing voids and healing of the closed void. In addition, compression tests of the 1.9wt%C ultrahigh carbon steel revealed that new microvoids form within the blocky cementite at temperatures of less than $900^{\circ}C$ and that local melting can occur at temperatures over $1120^{\circ}C$. Thus, the forging temperature should be controlled between 900 and $1120^{\circ}C$. Based on these results, incremental upsetting and diffusion bonding were used to check whether they are effective in closing and healing voids in a 1.9wt%C ultrahigh carbon steel. The incremental upsetting and diffusion bonding were performed using sub-sized specimens of 1.9wt%C ultrahigh carbon steel. The specimen was deformed only in the radial direction during the incremental upsetting until the reduction ratio reached about 45~50%. After deformation the specimens were kept at $1100^{\circ}C$ for the 1 hour in order to obtain a high bonding strength for the closed void. Finally, microstructural observations and tensile tests were conducted to investigate void closure behavior and bonding strength.

요통환자 80례에 대한 임상적 고찰 (The Clinical Study on 80 Cases of Low Back Pain Patients)

  • 전성하;류헌식;장병선;김수현;박회진
    • Journal of Acupuncture Research
    • /
    • 제24권2호
    • /
    • pp.155-167
    • /
    • 2007
  • Objectives : This study was performed to evaluate the general distribution and the efficacy of oriental medical treatment for low back pain. Methods: We have selected of the moxa bucket moxibustion. We make a comparative study of the thermodynamic characteristics of moxa bucket moxibustion. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa bucket moxibustion made by oak wood. Results : The 80 cases of low back pain patients was analyzed according to the distribution of sex, age, the period of disease, contributing factor, the patient-condition on admission, the symptom on admission, the duration of admission, the reading of the X-ray and the treatment efficacy was evaluated respectively. 1. Female was more than male in the ratio of 1:1.2, and thirties and seventies 25% the most, the acutest phase 46.3% the most, reason unknown 33.8% the most, Grade III 50% the most, L.B.P. only 51.3% the most, the day of 6-10 30% the most, compression Fx 30% the most. 2. In the total treatment result, the good was 51.3%, the excellent 22.5%, the fair 17.5%, the poor 8.8% in order. About 'the effective rate'(the percentage of positive effective treatment cases) of each distribution, the fifties 100% the most, the acutest phase 97.3% the most, the slip down, weight lifting, overuse 100% the most respectively, Grade III 97.5% the most, L.B.P. only 95.1% the most, the day of 11-15 100% the most, HN.P. 93.3% the most. Conclusions : We have known the efficacy of oriental medical treatment for L.B.P. was good and early treatment was better than late treatment and main cause of L.B.P. was degenerative change.

  • PDF

흉(胸)·요추(腰椎) 압박골절(壓迫骨折) 환자(患者)에 대한 임상적(臨床的) 고찰(考察) (The clinical study on 44 cases of patient with Thoracolumbar Compression Fracture)

  • 임정은;김기현;황현서
    • Journal of Acupuncture Research
    • /
    • 제17권2호
    • /
    • pp.41-51
    • /
    • 2000
  • Clinical observation was made on 44 cases of stable thoracolumbar compression fracture that were confirmed through simple x-ray and neurological examination. They were hospitalized and treated by acupuncture and moxibustion, bed rest, herb medicine and physical therapy. If necessary, patient was given an enema. The results obtained are as follows. 1. The patient distribution ratio, in regard to sex, was shown to be 1: 13.7 for males to females. In regard to age, it was shown that people in their 60's was the most predominant case, followed by people in their 70's, 80's, 50's and 40's, respectively. 2. In regard to contributing factors, it was observed that accidental falls were most frequent, followed by reasons unknown, repetitive lifting of heavy objects, overlaboring and bruise in that order. 3. In regard to duration of illness before treatment, it was found that treatment within 1 week was most predominant, followed by over 4 weeks, and 1-2 weeks, respectively. 4. With regard to the duration of hospitalization, hospitalization within 2 weeks was found to be most predominant, followed by 2-4 weeks. 5. In regard to the level of the affected vertebral body; The affected vertebral bodies distributed between T3 to L5 except for T7; T12 was found to be most predominant, followed in turn by L1 and L5. 6. In regard to the number of affected vertebral bodies, 2 was the most frequent followed by 1 and 3, in that order. The average of the number of affected vertebral bodies was observed to be 2.8 and single vertebral body compression fracture was shown to have no clinical and statistical difference as compared with multiple vertebral body compression fractures. 7. In regard to the grade of the seriousness of symptoms, it was found that Grade IV was most predominant, followed by Grade III. 8. With regard to signs at the first medical examination, low back pain was seen in the highest number, and followed in order by gait disturbance, flank pain, flexion-extension disturbance, disturbance of rotation to right or left, and bowel dysfunction. 9. Concerning the effect of treatment, good results were most predominantly seen, and 95.5% of total patients showed fair results. 10. The duration of admission treatment due to the grade of clinical symptoms was as follows; In the case of the Grade IV, it was observed that within 2 weeks was most predominant and for Grade III was 2-4 weeks. It was also found that the grade of clinical symptoms was not in proportion to the duration of admission treatment. 11. In regard to the result of treatment due to the grade of clinical symptoms; It was found that in the case of Grade IV, within 2 weeks was most predominant, and for Grade III, it was found to be 2-4 weeks. 12. Intestinal obstruction was shown in 50% of total patients; In the case of duration of constipation, more than 1 week was found to be most predominant, followed by 2 and 4 days respectively. 13. With regard to the treatment of intestinal obstruction, using acupuncture and moxibustion, herb - medicine and enema together were found to be most effective. 14. Intestinal obstruction was mostly seen in the case of Grade IV.

  • PDF

삼축압축 하에서 지중연속벽 주변 방콕 연약 점토의 거동 (Behaviors of Soft Bangkok Clay behind Diaphragm Wall Under Unloading Compression Triaxial Test)

  • Le, Nghia Trong;Teparaksa, Wanchai;Mitachi, Toshiyuki;Kawaguchi, Takayuki
    • 한국지반공학회논문집
    • /
    • 제23권9호
    • /
    • pp.5-16
    • /
    • 2007
  • 비배수 상태에서의 변수 $S_u,\;E_u$, n의 함수로 표현되는 단순한 선형 완전점탄성 모델은 굴착 중에 연성 토양에 시공되는 지중연속벽의 변위를 예측하는데 사용된다. 그러나 유한요소해석에서의 이러한 모델은 굴착이 잠시 중단되었거나 완료된 후 지중연속벽의 측방향 변위를 연속적으로 예측하는 데 한계가 있다. 굴착이 이루어지지 않는 동안의 지중연속벽 주변 토양의 변형 거동특성을 연구하기 위하여, 지중연속벽 주변 토양에 작용하는 응력상태를 가정한 '방콕 연약 점토'에 대한 일련의 삼축압축시험이 모사되었다. 본 연구에서는 세 가지 다른 조건에서의 삼축압축시험이 실시되었는바, 압밀 비배수 조건에서의 재하($CK_0UC$), 압밀 배수 및 비배수 조건에서의 재하 및 제하($CK_0DUC$$CK_0UUC$)의 조건에서 시험이 실시되었다. 시험으로부터 일련의 $CK_0DUC$ 시험에서 얻은 전단강도는 $CK_0UC$ 시험에서의 잔류강도와 같음을 알 수 있었다. $CK_0DUC$ 시험에서 시험편에 가해지는 수평압력을 점진적으로 감소시키면서 측정한 탄성계수는 편차응력의 증가와 더불어 감소함을 알 수 있었다. 또한 $CK_0UC$$CK_0DUC$시험에서 한계상태 관계의 기울기가 동일하게 나타났다. 더욱이, $CK_0DUC$시험에서 수평압력을 점진적으로 감소시킬 경우의, 축방향 및 반경방향 변형율 증가율을 시간, 한계상태 관계의 기울기, 편차응력과 평균 유호응력의 비의 함수로 표현할 수 있었다. 이 연구는 삼축압축시험의 제하 과정에서 얻은 시험 결과가 굴착 중 지중연속벽의 변형을 예측하는데 사용될 수 있음을 보였다.AFM)과 Scanning Electron Microscopy(SEM)을 통해 관찰한 GST 다층박막시료의 고온 열처리 전후 표면미시거칠기 변화도 PRAM 기록기를 사용할 때에는 in-situ 타원계를 사용할 때보다 1/10 정도의 크기를 보여주어 PRAM 기록기와 분광타원계를 사용하여 결정한 GST의 고온광학물성의 신뢰성을 확인하여 주었다.>, 여자 $179.1{\pm}37.2%$이었다. 평균필요량에 비해 가장 낮은 양을 섭취한 영양소는 엽산으로서 남자 $60.1{\pm}10.8%$, 여자 $54.6{\pm}9.9%$로 조사되었다. 칼슘의 섭취량은 평균필요량에 비해 전체 $74.9{\pm}31.9%$로 나타났다. 에너지 섭취량에 있어서 남자 노인들은 모두가 필요추정량의 75% 미만을 섭취하고 있었고 여자 노인의 경우에도 97%가 필요추정량의 75% 미만을 섭취하여 에너지 섭취량이 매우 낮았다 반면에 단백질 섭취량에 있어서는 남자 노인의 경우 100%가 평균필요량의 125%를 초과하였고, 여자 노인의 경우에는 91%가 평균필요량의 125%를 초과하여 대조적이었다. 비타민 A와 E는 각각 평균필요량과 충분섭취량의 125%를 초과하는 비율이 높게 나타난 반면에 비타민 $B_2$는 특히 남자 노인에서 평균필요량의 75%미만을 섭취한 비율이 높게 나타났다. 엽산 섭취량에 있어서는 평균필요량의 75% 미만을 섭취한 비율이 전체 96%로 나타나 심각한 부족상태로 조사되었다 반면에 철의 섭취량은 남녀 모두 100%가 평균필요량의 125%를 초과하여 섭취한 것으로 나타났다. 아연의 섭취량은 남자 17%,여자 15%가 평균필요량의 75% 미만을 섭취한 것으로 조사되었다. 에너지와 엽산은 모든 노인들에서 평균필요량에 미달되게 섭취한