• Radiation Oncology Journal
• /
• 제13권2호
• /
• pp.199-203
• /
• 1995

Purpose: To evaluate the dose under lung block as a function of depth and the effectiveness of a block as a function of block width. Materials and Methods : Field size of mantle field was $22.8{\times}32.4cm^2.$ Dose distribution of the mantle field was measured with two dimensional water phantom system. To analyze the effectiveness of the lung block. central axis plane, 5cm off-axis plane, and 10cm off-axis plane were studied. Results: The dose under the lung block was recorded with maximum at the depth between 5cm and 10cm. In the central axis plane, dosimetric block width was $10-15\%$ less than physical block width. In the 5cm off-axis plane, dosimetric block width was $4-9\%$ less than physical block width. In the 10cm off-axis plane, dosimetric block width was $2\%$ less than physical block width. Conclusion: Depth dependence of the dose under the lung block was founded. Also, block width dependence of the lung block was founded. To induce the accurate relation between the physical block width and the 'effective' block width, it needs more detailed understanding of the variables involved.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1179-1185
• /
• 2007

본 논문은 슬래브내의 보 상부철근의 영향을 파악하기 위한 해석적 연구로 슬래브가 있는 보-기둥 접합부에서 기존의 설계방법인 직사각형 단면 내에 상부철근을 2단으로 배근한 보와 동일량의 상부철근을 직사각형 단면에 1단만 배근하고 나머지는 보의 적정 플랜지폭 내에 분산 배치하여 상부철근의 배치에 따라 보의 휨 강도가 어떻게 변화하는지를 정량적으로 평가할 수 있도록 하는 것이다. 이러한 연구 목적을 수행하기 위하여 상용화된 범용 구조해석 프로그램인 ANSYS를 이용하여 모델링하고, 비선형 구조해석을 실시하였다. 플랜지폭, 플랜지(슬래브)두께 및 상부 플랜지내에서의 철근의 위치 등을 변수로 한 수치해석을 통하여 보의 최대내력을 비교 검토한 결과, 플랜지폭의 영향은 상부 인장철근을 1단으로 직사각형 단면에서 멀리 배치할수록 내력차이가 증가하는 것을 확인하였으며, 플랜지폭이 동일한 계열에서 내력이 증가되는 비율은 플랜지두께의 영향을 크게 받지 않는 것으로 나타났고, 상부 인장철근의 위치에 따른 내력은 슬래브두께가 증가할수록 내력의 차이가 줄어드는 것으로 나타났다.

• 한국강구조학회 논문집
• /
• 제28권5호
• /
• pp.355-363
• /
• 2016

본 논문은 절곡 제작된 U형 단면 거더의 상부플랜지를 구성하는 자유돌출판의 좌굴거동 특성에 논하고자 한다. 절곡된 판 부재는 둥근 모서리를 가지므로 단면의 유효폭-두께비가 불명확하고 이에 따라 공칭 압축강도를 산정하는 데 모호한 면이 있다. 냉간성형에 의해 둥근 모서리를 갖는 자유돌출판의 등가유효폭을 평가하기 위해 3차원 유한요소해석을 수행하였다. 절곡에 따른 재료특성과 기하하적 특성을 반영하였다. 본 변수 해석적 연구로부터 각진 모서리를 갖는 일반적인 자유돌출판의 좌굴강도와 비교 분석하여 등가유효폭-두께비를 추정하였다. 국내 설계기준의 공칭 좌굴강도식이 근거하고 있는 이론식과의 비교를 통해 기준공식의 적용 방안에 대해 검토하였다.

• 한국해안해양공학회지
• /
• 제16권4
• /
• pp.206-212
• /
• 2004

본 연구에서는 폭이 좁은 1열 및 다열 잠제 대한 파랑 차단 성능을 폭이 넓은 1열 및 2열 잠제의 파랑 차단 성능과 비교$.$연구하였다. 파동장은 선형포텐셜 이론으로 모형화 하였으며 유한요소법을 적용하여 수치해석 하였다. 수치해석 결과, 1열 잠제에서는 폭이 좁은 잠제가 폭이 넓은 잠제보다 파랑 차단 성능이 다소 떨어지나 어느 정도 효과적인 파랑 차단 성능을 보여주고 있으며, 폭이 좁은 잠제를 2열 또는 3열로 배치하였을 때에는 폭이 넓은 1열 또는 2열 잠제보다 훨씬 뛰어난 파랑 차단 성능을 보이고 있다.

• Structural Engineering and Mechanics
• /
• 제28권4호
• /
• pp.443-460
• /
• 2008

The aim of this paper is to propose a design procedure for predicting the buckling strength of built-up, cold-formed steel columns based on the two well known methods; the effective width method and the Direct Strength Method. Several design approaches, based on different elastic buckling solutions, were considered in this investigation. Traditional hand methods, without interaction effects between the different modes, and a new numerical spline finite strip method were used to predict the buckling stresses. All of the proposed methods were compared with experimental data on plain and lipped, built-up columns. Results have shown that the effective width approaches are more accurate than the Direct Strength Method. However, both methods can be investigated using more experimental data to assess a practical design method for built-up columns.

• 소성∙가공
• /
• 제6권3호
• /
• pp.203-212
• /
• 1997

In this research, to obtain the optimal die width of CV die(conventional die), which replaces FM die in free forging of large scale rotor using the flat die, the model material experiments and theoretical analysis using three dimensional FEM are performed. The FM die, which was designed to remove Mannesmann's effect at the central part of the ingot, has very bad workabiltity in real field, therefore on the empirical base they use the CV die of wide width in actual working field. In this study, the excellency of CV die is proved quantitively, and the optimal die width of CV die is determined through the model material experiments and theoretical analysis using FEM in the point of effective strain, stresses, and load.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.413-416
• /
• 2004

This paper describes a proposal for crack width and deflection in RC flexural members. Because the serviceability provisions of the current codes are mainly based on only empirical relationships developed from test result and effective moment of inertia, crack width and deflections are contrary to the actual values. Based on nonlinear bond characteristics, tension stiffening effect, arch action and effective concrete tensile area. Then an equation is developed for predicting crack width and deflection in flexural members. The predicted results shows that as proposed model employed, crack width and deflections are different from estimated by the current KCI, MC 90 and EC 2 provisons, and the values predicted are in good agreement with experimentally measured values.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.329-332
• /
• 2006

To study the effect of the macroscopic TVLEM(Three Vertical Line Element Model) which is developed in 2D, a bearing wall system is selected and 2D and 3D pushover analyses are carried out. In 2D model, the participating width of a flage wall to lateral resistance is modelled based on Paulay's effective width. From the comparisons of roof displacements, 2D model which uses the effective width of flange wall has better prediction and less analysis time than 3D model which has intrinsically the full width of the flange that causes higher stiffness and strength and shorter deformation capacity than 2D model.

• Steel and Composite Structures
• /
• 제51권3호
• /
• pp.325-335
• /
• 2024

Yielding dampers exhibit varying cyclic behavior based on their geometry. These dampers not only increase the energy dissipation of the structure but also increase the strength and stiffness of the structure. In this study, parametric investigations were carried out to explore the impact of angled U-shape damper (AUSD) dimensions on its cyclic behavior. Initially, the numerical model was calibrated using the experimental specimen. Subsequently, analytical equations were presented to calculate the yield strength and elastic stiffness, which agreed with the experimental results. The outcomes of the parametric studies encompassed ultimate strength, effective stiffness, energy dissipation, and equivalent viscous damper ratio (EVDR). These output parameters were compared with similar dampers. Also, the magnitude of the effect of damper dimensions on the results was investigated. The results of parametric studies showed that the yield strength is independent of the damper width. The length and thickness of the damper have the greatest effect on the elastic stiffness. Reducing length and width resulted in increased energy dissipation, effective stiffness, and ultimate strength. Damper width had a more significant effect on EVDR than its length. On average, every 5 mm increase in damper thickness resulted in a 3.6 times increase in energy dissipation, 3 times the effective stiffness, and 3 times the ultimate strength of the model. Every 15 mm reduction in damper width and length increased energy dissipation by 14% and 24%, respectively.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권4호
• /
• pp.219-223
• /
• 2000

The evaluation of habitability to building vibration is conducted by the values of natural frequency, amplitude displacement, damping ratio. These values can be obtained from test or analytical results. Data acquisition through test may be possible in existing building, however, to estimate the serviceability of the building, it is necessary to evaluate those values at the stage of design. The natural frequency is important and basic factor for the evaluation of the serviceability. Calculation method of the effective stiffness in RC slab is proposed. To prove the efficiency of the proposed method, sample results of the analysis and the test are compared. These results proved that the effective width proposed to calculate the effective stiffness is proper to evaluate the natural frequency.