• Elastomers and Composites
• /
• v.41 no.1
• /
• pp.10-18
• /
• 2006

Influence of low molecular weight polybutadiene (liquid PB) treated with maleic anhydride on properties of a silica-filled SBR compounds was studied. Silica dispersion was improved by adding liquid PB. The liquid PB treated with maleic anhydride (liquid MAPB) was found to be more effective for the improvement of silica dispersion than the liquid PB without maleic anhydride (liquid NPB). Viscosity of the SBR compound decreased by adding the liquid PB. The crosslink density decreased with increase of the liquid PB content and the cure rate became slower with increasing the liquid PB content. Considering the experimental results, it was believed that addition of small amount of the liquid PB (less than 5 phr) was desirable to improve properties of silica-filled SBR compounds.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.162-167
• /
• 2006

Nanofluid is a kind of new engineering material consisting of nanoparticles dispersed in base fluid. Nanofluids could have various applications such as magnetic fluids, heat exchanger working fluids, lubricants, drug delivery and so on in present study, various nanoparticles, such as MWCNT (Multi-walled Carbon Nanotube), fullerene, copper oxide, and silicon dioxide are used to produce nanofluids. As base fluids, DI-water, ethylene glycol, oil, and silicon oil are used. To investigate the thermo-physical properties of nanofluids, thermal conductivity and kinematic viscosity are measured. Stability estimation of nanofluid is conducted with UV-vis spectrophoto-meter. In this study, the high pressure homogenizer is the most effective method to produce nanofluid with the prepared nanoparticle and base fluid. Excellently stable nanofluids are produced with the magnetron sputtering system. Thermal conductivity of nanofluid increases with increasing particle volume fraction except water-based fullerene nanofluid which has lower thermal conductivity than base fluid due to its lower thermal conductivity, 0.4 W/mK. The experimental results can't be predicted by Jang and Choi model.

• Tribology and Lubricants
• /
• v.37 no.2
• /
• pp.41-47
• /
• 2021

An experimental device was developed for analysis of hydraulic oil characteristics with dielectric constant sensors. Online analysis is the most effective method of the three methods used for analyzing lubricant oils. This is because it can monitor the machine condition effectively using oil sensors in real time without requiring excellent analysis skill and eliminates human errors. Determining the oil quality usually requires complex laboratory equipment for measuring factors such as density, viscosity, base number, acid number, water content, additive, and wear debris. However, the electric constant is another indicator of oil quality that can be measured on-site. The electric constant is the ratio of the capacitance of a capacitor using that material as a dielectric, compared with a similar capacitor that has a vacuum as its dielectric. The electric constant affects the factors such as the base oil, additive, temperature, electric field frequency, water content, and contaminants. In this study, the tendency of the electric constant is investigated with a variation of temperature, water content, and dust weight. The experimental device can control working temperature and mix the contaminants with oil. A machine condition monitoring program developed to analyze hydraulic oil is described. This program provides graph and digital values with variation of time. Moreover, it includes an alarm system for when the oil condition is bad.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.1
• /
• pp.115-120
• /
• 2008

The dried persimmon was effective in caring an inflammation, an ulcer and a burn and preventing hypertension and arteriosclerosis. At the Jejungsinpyun. dried persimmons gruel was beneficial to stomach and intestine and toned down voice. Based on Jejungsinpyuns and Sikryochanyo, dried persimmons gruel was developed for modern people. To standardize the dried persimmons gruel, physical properties and consumer acceptability was examined. The procedures of dried persimmons gruel was to make dried persimmons juice after soaking dried persimmons with same volume water during 24 hr and blending. To decrease the astringent taste of dried persimmons, dried persimmons juice and water with cinnamon (2%) was mixed and simmered during 3 min. Dried persimmons paste with cinnamon was added and the gruel was boiled more during 5 min. dried persimmons gruel was completed. The dried persimmons gruel were divided of 5 groups consisted of each 10, 15, 20, 25, 30 g dried persimmons. As dried persimmons content increased, lightness, apparent viscosity decreased. Acceptability test indicated the sample of dried persimmons : rice ratio at 2 : 5 had the highest overall acceptability and flavor. Considered to each, the sample of the dried persimmons : rice ratio at 2 : 5 met the purpose of the study.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.36 no.4
• /
• pp.121-139
• /
• 2023

Objectives: This study was performed to analyze randomized controlled trial, which studied the effect of Saenghwa-tang treatment on postpartum prolonged lochia and uterine subinvolution. Methods: Researchers searched for randomized controlled trial of based on postpartum prolonged lochia, uterine subinvolution and Saenghwa-tang. The paper search was conducted through 6 online databases on August 10, 2023. Results: 8 studies were included after selection and exclusion criteria. 5 studies compared Saenghwa-tang alone with western medicine. 3 studies compared combined treatment of Saenghwa-tang and western medicine, with western medicine alone. Comparing with control group, the treatment group showed statistically significant improvement on total effective rate, uterine involution, serum fibrinogen, D-dimer, viscosity of blood and plasma, Erythrocyte aggregation, and various symptoms. Conclusions: This study suggests that Saenghwa-tang has benefit for treating prolonged lochia and uterine subinvolution. For reliable evidence, further research is needed to establish safety of Saenghwa-tang, standardize diagnosis criteria and specify the treatment course.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.336-341
• /
• 1998

A comparative study on the effects of mean particle diameter and substitutional ratio of II-anhydrite on the fluidity of cement paste has been conducted. Three different mean particle diameters(4, 14 and $35{\mu}m$) and four different substitution ratios(3, 5, 10, 15wt%) have been tested while the dosage of two superplasticizers - naphtalenic(NSF) and polycarboxylic(NT-2) - has been varied from 0 to 2.0wt%. To investigate the effects of those parameters, the variation in fluidity and apparent viscosity of the cement paste has been observed as a function of the elapsed time. The initial fluidity of the cement paste is more affected by the increase in substitution ratio than by the mean particle size of the II-anhydrite. When the substitution ratio of the II-anhydrite is fixed at 10wt%, addition of 1.0wt% NT-2 improves the fluidity of paste cement more than that for NSF. This case has showed the best improvement of the fluidity in the range of parameters investigated. At the addition of 1.0wt% NT-2, apparent viscosity of the cement paste has been noticeably decreased as substitutional ratio of II-anhydrite increases. It was found that it would be more effective to substitute II-anhydrite at a certain ratio to improve the fluidity of the cement paste, in addition to adding NT-2.

• Journal of Life Science
• /
• v.27 no.8
• /
• pp.930-936
• /
• 2017

The flocculating properties of bioflocculant Biopol32 produced by Pseudomonas sp. GP32 were investigated for application in industrial wastewater treatment. The major flocculating substance of bioflocculant Biopol32 was identified as polysaccharide. Many anionic flocculants need a counter ion to induce higher flocculating activity. The flocculating activity of bioflocculant Biopol32 was markedly increased by the addition of cationic ions ($Ca^{2+}$, $Al^{3+}$). The flocculating activity of bioflocculant Biopol32 was the most effective when 7.0 mM $CaCl_2{\cdot}2H_2O$ as coflocculant was added. The flocculating activity on the effect of pH and the temperature of the bioflocculant Biopol32 was compared with anionic commercial flocculant (polyacrylamide) and bioflocculant (zooglan from Zoogloea ramigera). In kaolin suspension, the highest flocculating activity was obtained at the bioflocculant Biopol32 concentration of 1.5 mg/l. A high flocculating activity was observed in the pH range of 5.0 to 8.0. The flocculating activity of bioflocculant Biopol32 was sustained up to $60^{\circ}C$, but decreased rapidly at over $70^{\circ}C$. In the batch culture, the charge density of bioflocculant Biopol32 was compared with flocculating activity. The larger the anionic charge density and apparent viscosity of bioflocculant Biopol32, the higher the flocculating activity. Therefore, we confirmed that the flocculating activity and apparent viscosity of bioflocculant Biopol32 was closely related to the charge density of bioflocculant Biopol32.

• Korean Journal of Microbiology
• /
• v.34 no.3
• /
• pp.162-168
• /
• 1998

The characteristics of demulsification of petroleum emulsion by Streptomyces sp. 8321 were investigated. Demulsification ability of Streptomyces sp. 8321 appeared to be confined within the spores. Spore surface hydrophobicity was increased with culture age stimulating the demulsification ability. Over $1.1{\times}10^8spores/ml$ completely demulsified kerosene-0.2% Triton X-100 (2:1) emulsion. Among the low viscosity hydrocarbons, hydrocarbons with longer chain such as n-hexadecane and diesel were more rapidly demulsified. However, only 20-30% of the emulsion with high viscosity hydrocarbons was demulsified after 24 hours. Oil-in-water emulsions made by Corexit, Finalsol and BP series surfactants were completely demulsified within one minute. Demulsification rate ($t_{1/2}$) of oil-in-water emulsions made by Corexit 7664, 8667, Triton X-100 and Tween 80 decreased as their concentration increased. In case of water-in-oil emulsion made by Seagreen, $t_{1/2}$ was over 24 hours. Therefore, demulsification ability of Streptomyces sp. 8321 was more effective on oil-in-water emulsions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.2
• /
• pp.198-202
• /
• 1997

Jangkimchi is a kind of Kimchi which is made with soy-sauce instead of salt. Occasionally, when sugar is added to Jangkimchi for condiment, the kimchi juice becomes viscous. In this study. the nature of the viscous material and the condition for producing viscous property in Kimchi juice were investigated. HPLC analysis showed that the viscous material in Jangkimchi is polysaccharide composed of glucose. Sucrose was more effective in forming viscous juice than glucose and the viscosity increased with the addition of sucrose up to 10%. Soy-sauce also played a role in increasing the viscosity of Kimchi juice compared with salt. Aerobic fermentation condition was found to be another factor to make the juice viscous. The population of Leuconostoc mesenteroides, well-known producer of viscous dextran was not different in the Kimchi juice prepared with the addition of sucrose from that without sucrose, which implys that the Jangkimchi preparation methods such as addition of sucrose and soy-sauce would do some effects on the production of viscous material in Jangkimchi.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.4
• /
• pp.237-242
• /
• 2009

In the pyroprocessing of spent nuclear fuels, fuel materials are recovered by electrochemical reactions on the surface of electrodes as well as stirring the electrolyte in electrolytic cells such as electrorefiner, electroreducer and electrowinner. The system with this equipment should first be scaled-up in order to commercialize the pyroprocessing. So in this study, the scale-up for those electrolytic cells was studied to design a large-scale system which can be employed in a commercial process in the future. Basically the dimensions of both electrolytic cells and electrodes should be enlarged on the basis of the geometrical similarity. Then the criterion of constant power input per unit volume, characterizing the fluid behavior in the cells, was introduced in this study and a calculation process based on trial-and-error methode was derived, which makes it possible to seek a proper speed of agitation in the electrolytic cells. Consequently examples of scale-up for an arbitrary small scale system were shown when the criterion of constant power input per unit volume and another criterion of constant impeller tip speed were respectively applied.