• Smart Structures and Systems
• /
• v.17 no.2
• /
• pp.275-296
• /
• 2016

This paper focuses on developing a new configuration on magnetorheological (MR) brake damper as prosthetic knee. Prosthetic knee uses magnetic fields to vary the viscosity of the MR fluid, and thereby its flexion resistance. Exerted transmissibility torque of the knee greatly depends on the magnetic field intensity in the MR fluid. In this study a rotary damper using MR fluid is addressed in which a single rotary disc will act as a brake while MR fluid is activated by magnetic field in different walking gait. The main objective of this study is to investigate a prosthetic knee with one activating rotary disc to accomplish necessary braking torque in walking gait via T-shaped drum with arc surface boundary and implementing of Newton's equation of motion to derive generated torque at the inner surface of the rotary drum. For this purpose a novel configuration of a T-shaped drum based on the effects of a material deformation process is proposed. In this new design, the T-shaped disc will increase the effective areas of influences in between drum and MR fluid together and the arc wall crushes the particles chains (fibrils) of the MR fluid together instead of breaking them via strain in a conventional MR brake. To verify the proposed MR brake, results of the proposed and conventional MR brakes are compared together and demonstrated that the resisting torque of the proposed MR brake is almost two times greater than that of the conventional brake.

• Journal of Ginseng Research
• /
• v.4 no.1
• /
• pp.1-7
• /
• 1980

In order to establish effective extracting method of ginseng extracts from fresh ginseng, the yield, chemical composition, physical properties and organoleptic quality of the extracts, which are extracted with various concentrations of ethanol, were investigated. The results are as follows : 1. The yield of the extracts was increased with decreasing the concentration of ethanol as solvent. As in case of water as a solvents, the highest yield was achieved when 23.64% of water was used. The yield were 12.3% and 9.05%, when 70% and 90% of ethanol were used, respectively lively. 2. Crude protein content is the highest level and nitrogen·free extracts content is the lowest at the concentration of 50% ethanol. Lipid was increased linerly while ash was decreased as increment of ethanol concentration. 3. Viscosity and residue of the extracts also decreased in accordance with the increament of ethanol concentration and the transmittance value and pH of extract solutions were almost similar except transmittance value of the water extracts. 4. The extracts extracted with 70% ethanol gave the best result of sensory test. The total sensory test score of each extracts (70%, 90%, 50%, 0% and 30%) were 70, 65, 50, 46 and 41, respectively.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.1
• /
• pp.121-126
• /
• 2016

Hydraulic performance of a micro-bubble pump has been analyzed by numerical simulation and experimental measurements. Flow recirculation apparatus between the pump inlet and outlet reserviors has been adopted to measure pump performance according to flow conditions sequentially. To analyze three-dimensional flow field in the micro-bubble pump, general analysis code, CFX, is employed. SST turbulence model is employed to estimate the eddy viscosity and compared the pump performance to k-${\varepsilon}$ model. Unstructured grids are used to represent a composite grid system including blade, casing and inlet casing. It is found that the numerical model used in the present study is effective to evaluate the pump performance. From the numerical simulation, low velocity region due to pressure loss is decreased where pump efficiency has maximum value. Detailed flow field inside the micro-bubble pump is also analyzed and compared.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.284-287
• /
• 2001

Multi-pole anisotropic Sr-fertile sintered magnets has been studied by powder injection molding under applied magnetic field. The orientation of anisotropic Sr-ferrite powders higher than 80% during injection molding is achieved at the following conditions; apparent viscosity lower then 2500 poise in 1000 sec$\^$-1/ shear rate and applied magnetic field higher then 4 kOe. For the high fluidity and strength of injection molded compact, and the effective binder removal without defects during solvent extraction and thermal debinding, the optimum multi-binder composition is paraffin wax(PW)/carnauba wax(CW)/HDPE = 50/25/25 wt%. The rate of binder removal is proportional to the mean particle size of Sr-ferrite powders whereas it is inversely proportional to the content of Sr-ferrite powders and the sample thickness. The high magnetic properties of Sr-ferrite sintered magnets are; 3.8 kG of remanent flux density, 3.4 kOe of intrinsic coercivity, and 1.2 kG of surface flux density (1-mm-thick) in the direction of applied magnetic field.

• Microbiology and Biotechnology Letters
• /
• v.24 no.5
• /
• pp.546-552
• /
• 1996

The applicability of chitosan, a biodegradable natural polymer, as the coating material to prevent the dispersal of the spores of the apple white rot agent Botryosphaeria dothidea, was investigated. The physical properties of mixed chitosan/polyvinyl alcohol(PVA) film showed the increased physical properties for film formation, such as tensil strength, elongation, and viscosity, compared to either chitosan or PVA film. The FT-IR spectra of chitosan/PVA film indicated that the film was formed by simple blending not by any new synthetic bond. The chitosan and chitosan/PVA film showed effective antifungal activity on B. dothidea. The formed films were well decomposed by ASTM strains used for biodegradability test, on the other hand, the PVA film could not be decomposed by above standard strains. The field test at apple orchard showed that the dispersal of B. dothidea spores could be effectively reduced by coated film, especially by chitosan/PVA film. The spore dispersal was reduced upto 97.0% by 1.0% chitosan/5.0% PVA film during 4 months.

• Microbiology and Biotechnology Letters
• /
• v.12 no.4
• /
• pp.261-264
• /
• 1984

The optimal condition of the ethanol fermentation from raw cassava starch by simultaneous saccharification - fermentation (SSF) was studied using glucoamylase from Aspergillus sp. and a yeast strain. The rate and yield of ethanol production were optimum at pH 3.6 with shaking. The fine milling treatment was effective for both saccharification and SSF of raw cassava starch. The presaccharification at 6$0^{\circ}C$ for 1 hr before SSF increased the rate and yield of ethanol production, as well. To increase the ethanol concentration after fermentation the substrate concentration could be increased up to 2195 without the problem of viscosity. The use of high concentration ethanol tolerant yeast strains and high substrate concentration produced ethanol higher than 10%(W/V) after fermentation for 5 days.

• Tribology and Lubricants
• /
• v.16 no.5
• /
• pp.332-340
• /
• 2000

The reduction of sulfur content in the diesel fuel has caused the poor lubricity of diesel fuel in the distributor type injection pumps of diesel engines that use the diesel for lubrication of their moving parts. To investigate the reason for poor lubricity of low sulfur diesel fuels, the wear scar diameters by HFRR (High Frequency Reciprocating Rig) were measured on the diesel fuels from Korean markets and the results were compared with their physical and chemical properties. Also, the lubricity change and the improvement effects on lubricity additives for the ultra low sulfur diesel fuel, were made experimentally, that will be regulated to a maximum of 0.005 wt% from about 2005 were evaluated. As a result, a good correlation was found between the wear scar diameter and the polyaromatic compound which includes heterocyclic compound in the diesel fuel. It was also found that the content of polyaromatic compound including heterocyclic compound was affected by the amount of desulfurization treatment fraction. And the lubricity additives with ester base were more effective than that with acid base on the ultra low sulfur diesel fuel. Therefore, it is suggested that the factors affecting the lubricity stated above should be taken into account to improve the lubricity property of the diesel fuel in the refining process.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.370-377
• /
• 2014

The basic elements in a rotary-type scroll compressor are two identical spiral scrolls containing refrigerant gas. The pressure variations in the compression pockets of a scroll compressor change the forces acting on the orbiting scroll, and these forces affect the dynamic behavior of the compression mechanism parts. To achieve high efficiency, using a self-sealing mechanism as a tip seal mechanism is very effective. Tip seals, which are placed on top of the scroll wraps, accomplish thrust sealing. This study calculates the friction force between the tip seal and the side plate of a scroll compressor using the numerical model considered in the Reynolds equation. The calculated friction force is verified by an experiment using a pin-on-disk apparatus. A hydraulic servo valve that controls the pressure of the oil hydraulic cylinder applies the normal load for the test, and a DC servo motor controls the sliding velocity of the disk. The friction force and normal load are measured by the force sensors attached to the supporting parts. The results show that the theoretical and experimental results are similar and that the friction is influenced by the viscosity of the oil and the sliding velocity of the scroll.

• Preventive Nutrition and Food Science
• /
• v.1 no.1
• /
• pp.46-52
• /
• 1996

Effective method for the preparation of Dongchimi juice was developed by addition of NaCi, sucrose and bydrolytic enzymes before fermentation and addition on Dongchimi juice during fermentation. The radish was ground and suspended in water(1:1, w/v) with addition of spices(garlic, green onion and ginger) followed by fermentation at $25^{\circ}C$. The addition of 2% NaCi and 0.5~2.0% sucrose resulted in significant increase of solid content and it was also improved by the addition of polysaccharide hydrolyzing enzyme during fermentation. When the fermented juices of pH 5.4 of 4.4 were added by 15% of total weight before(pH 5.4 juice)and during (pH 4.4 juice) fermentation, a significant increase in solid content after 24hrs of fermentation was resulted. The combined method of addition of 2% NaCI, 1.0% sucrode, 0.1% Viscozyme and 10% of fermented juice of pH 5.4 and 4.$ before and during fermentation improved solid content, reducing sugar, color and showed little effect on viscosity. The organoleptic characteristics were also improved by the combined method.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.6
• /
• pp.53-58
• /
• 2007

A particle method, recognized as one of gridless methods, has been developed to investigate non-linear free-surface motions interacting with structures. This method is more feasible and effective than conventional grid methods for solving flow fieldswith complicated boundary shapes. The method consists of particle interaction models representing pressure gradient, diffusion, incompressibility, and the free-surface boundary conditions without grids. In the present study, broken dam problems with various viscosity values are simulated to validate the developed method.