• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.33-34
• /
• 2018

Currently, free-form building has been increased worldwide. However, as a finishing material of free-form building, the production of free-form concrete panels(FCPs) spends lots of cost and efforts since it is difficult to reuse the FCP formwork and lots of workers are needed to make free-form curve. In addition, the technology to produce the FCP economically and easily is insufficient. Therefore, the objective of this study is a basic study regarding production management for developing free-form concrete panels. To achieve the objective, the property of FCP and condition for effective production management and production process are analyzed. The results of this study can utilize to develop the algorithm for FCP production management.

• 한국작물학회지
• /
• 제43권4호
• /
• pp.223-227
• /
• 1998

The objectives of this study were to find the sprouting condition and to establish the optimum production methods of plug seedlings in yacon (Polymnia sonchifolia Poepp. & Endl.). The sprouting ratio was greatest at $30\pm 1^{\circ}C$ at 20 days after planting. Crowns with single buds were more effective than those with two or more buds for sprouting, which might be due to the apical dominance. Planting the shoots separated from crown after sprouting in the single- and double-layer polyethylene-covered greenhouses reduced seedling period with 25% and 50%, respectively. Planting the shoots after sprouting was more effective than planting the crown buds. Double-layer polyethylene-covered green-house was good for plug seedling production than open field or single-layer polyethylene-covered greenhouse. The bed soils composed of clay loam : compost or sand : compost (1:l=v:v) were more effective to produce plug seedlings than only clay loam, sand or compost. Seedlings could be produced at 30 days after planting in our studies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.112-115
• /
• 2001

This paper illustrates a new nodal effective load model for nodal probabilistic production cost simulation of the load point in a composite power system. The new effective load model includes capacities and uncertainties of generators as well as transmission lines. The CMELDC based on the new effective load model at HLII has been developed also. The CMELDC can be obtain from convolution integral processing of the outage capacity probabilistic distribution function of the fictitious generator and the original load duration curve given at the load point. It is expected that the new model for the CMELDC proposed. In this study will provide some solutions to many problems based on nodal and decentralized operation and control of an electric power systems under competition environment in future. The CMELDC based on the new model at HLII will extend the application areas of nodal probabilistic production cost simulation, outage cost assessment and reliability evaluation etc. at load points. The characteristics and effectiveness of this new model are illustrated by a case study of a test system.

• 펄프종이기술
• /
• 제32권3호
• /
• pp.25-31
• /
• 2000

It is required to use substantial amount of wet strength resin for producing multi-functional mulch papers since these paper products shold maintain its strength properties when they exposed to outdoor weather for several months. While producing mulch papers it is usual to observe significant amount of foam at white water silo. Thus it is imperative to use defoaming or antifoaming agents. In this study diverse defoaming and antifoaming agents have been tested for their effective-ness in eliminating foams that produced. It was shown that combined use of a silicone type defoamer and a fatty acid type anti-foaming agent was msot effective in eliminating foams. These chemicals were used in trial production of mulch papers and their influence on paper-making wet end system was examined including one pass retention cationic demand con-ductivity pH etc. It was found that the defoaming agents were very effective for removing foams in trial production. Tensile strengths of the mulch papers produced were significantly greater than commericial mulch papers produced in Japan.

• 한국미생물·생명공학회지
• /
• 제27권5호
• /
• pp.378-384
• /
• 1999

Protopectinase (PPases) are heterologous group of enzymes that degrade pectin from the insoluble protopection which is constituent of the middle lamella and primary cell wall of higher plants by restricted depolymerization. From the previous report[6], enzymatically separated plant cells, which are produced from plant tissues by PPases treatment, showed well-conserved cellular components with their rigid cell wall and this characteristic is applicable to preparation of novel food material. The purpose of this study is to investigate the effect of medium composition of PPase production from Bacillus subtilis EK11 which was selected as a PPase producer. Various carbon sources and concentrations on PPase production were studied and corn starch at 0.7% was the most effective for production of PPase. Among the nitrogen sources, yeast extract was the most effective for PPase production and the effect of (NH4)2SO4 was notable as inotganic nitrogen source. Inorganic compounds such as KH2PO4, K2HPO4, Na3-citrate.2H2O and MgSO4 were optimized for PPase production. PPase activity was inhibited by the adition of Ba2+ or Zn2+. The optimal medium for PPase production was devised: 0.7% corn starch, 0.3% yeast extract, 1.4% KH2PO4, 0.6% K2HPO4, 0.1% Na3-citrate.2H2O and 0.02% MgSO4. PPase production by using the optimum medium was carried out with shaking cultivation at 37$^{\circ}C$. The maximum PPase activity of 256unit/ml could be obtained after the cultivation for 48hrs. The activity was increased about 2.2timesthan the activity, 112 unit/ml, in basal medium.

• 품질경영학회지
• /
• 제44권3호
• /
• pp.541-552
• /
• 2016

Purpose: In this study, we propose that how to approach a effective system engineering and optimize system engineering management process for the mass production weapon system parts localization development process and success in DTaQ. Methods: To approach a effective system engineering for the mass production weapon system parts localization, we analyze a weapon system acquisition process and system engineering process of Republic of Korea and DTaQ parts localization business regulations in advance. after results of analysis of them, we implement a optimized parts localization development system engineering based on ISO/IEC/IEEE 15288. Results: In order to apply International Standard ISO/IEC/IEEE 15288 to the mass production weapon system parts localization development process, we compare the mass production weapon system parts localization acquisition environment with ISO/IEC/IEEE 15288 and analyze them. therefore, It is possible to implement a part of concept stage and development stage of ISO/IEC/IEEE total life cycle stage for the mass production weapon system parts localization development process. To achieve the technical review milestones of DTaQ parts localization business regulations in the selected stages of ISO/IEC/IEEE, the development and management agency perform 2 high rank process and 19 low rank process specified in ISO/IEC/IEEE. Conclusion: When the development and management agency perform the mass production weapon system parts localization development using the proposed system engineering approach, they should easily meet milestone through the clarified requirement and simplified System Engineering output documents in limited development period.

• 농업과학연구
• /
• 제44권1호
• /
• pp.40-49
• /
• 2017

Cultural practices for adzuki bean and the distribution of weed species in the south-west regions of Korea were surveyed to provide information on effective weed management. Approximately 27.5% of the farm households were growing adzuki bean in an area larger than 1 ha while the rest grew the crop in an area smaller than 1 ha. Of all adzuki bean growers, 17.1% seeded in early June, 8.6% in mid June, 34.3% in late June, 17.1% in early July, 20.0% in mid July, and 2.9% in late July. The average planting distance was $71.0{\times}29.5cm$. From the 40 surveys in adzuki bean fields, 35 weed species in 17 families were identified. According to the occurrence frequency, the dominant weed species were Digitaria sanguinalis, Acalypha australis, Cyperus amuricus, Echinochloa crus-galli, and Amaranthus nangostanus in decreasing order of dominance. However, based on dry weight, Chenopodium album (34.4%) was the most dominant followed by Acalypha australis (21.9%), Amaranthus nangostanus (19.1%), Digitaria sanguinalis (7.5%), and Portulaca oleracea (6.1%). The exotic weeds found in the field of adzuki were Ipomoea hederacea, Abutilon avicennae, and Celosia argentea. The plant heights of I. hederacea, A. avicennae, and C. argentea were 259 cm, 98 cm, and 76 cm, respectively, while the fresh weights were 850 g, 66 g, and 101 g, respectively. Integrated weed management systems utilizing mechanical, chemical, and biological control techniques need to be developed for effective weed management in adzuki bean production.

• 약학회지
• /
• 제42권1호
• /
• pp.82-88
• /
• 1998

The effect of hepatoprotective agents and bile acids on tumor necrosis factor-alpha, (TNF-${\alpha}$) production in murine and human macrophage cell line (RAW264.7 and U937) was inve stigated. The hepatoprotective agents including silymarin and its major component, silybin, significantly inhibited TNF-alpha production in a concentration dependent manner ($IC_50$ of silybin=67.7${\mu}g$/ml (140.3${\mu}g$M)). In differentiated U937 cells, especially, silybin showed more effective inbitory activity ($IC_50$=35.1${\mu}g$g/ml (72.7${\mu}g$M)). These results suggest that silymarin and silybin may inhibit TNF-alpha production in the process of hepatic diseases in human. However, biphenyldimethyl dicarboxylate (DDB) was not effective. In the case of bile acids, chenodeoxycholic acid (CDCA) showed a concentration dependent inhibitory effect on TNF-alpha production ($IC_50$ of CDCA= 71.5${\mu}g$g/ml (182.1${\mu}g$M)). In contrast, glycine or taurine conjugated form (G-CDCA or T-CDCA) restored to the control level or significantly increased TNF-${\alpha}$ production. And also ursodeoxycholic acid (UDCA) and its conjugated forms (G-UDCA and T-UDCA) showed a variety of patterns on TNF-${\alpha}$ production by changes of functional groups and concentration. These results also indicate that bile acids may regulate TNF-${\alpha}$ production in normal hepatic function or disease conditions.

• 대한한의학회지
• /
• 제39권2호
• /
• pp.92-105
• /
• 2018

Objectives: This aim of this study is to compare the reflux esophagitis improvement effects of Sepiae Os, Arcae Concha, Ostreae Concha, and Proton Pump Inhibitor(esomeprazole) through rat experiments. Methods: NO production inhibitory effect was measured by NO production amount and iNOS mRNA expression level in cell lines. iNOS, $TNF-{\alpha}$ and $p-I{\kappa}B$, and serotonin were compared using immunohistochemistry at the rat reflux esophagitis. Reflux esophagitis connection external form, lower esophageal sphincter, and gap were observed and an esophageal inflammatory indicator, IL-6 activity was also evaluated by immunohistochemistry. Results: NO production and iNOS mRNA expression was showed concentration dependent decrease in cell lines treated with Sepiae OS, Arcae Concha, and Ostreae Concha at the experiments of cell lines. In the suppression of iNOS and $p-I{\kappa}B$ at the rat reflux esophagitis, Sepiae Os treat group(SOT) and Ostreae Concha treat group(OCT) were more effective. In the increase of serotonin at the rat reflux esophagitis, ACT, MT and OCT were more effective. Damage of lower esophageal sphincter, and gap between esophageal keratin and mucosa were observed less at the SOT, ACT, OCT. In the suppression of IL-6 at the rat reflux esophagitis, SOT and OCT were more effective than GE and, SOT was more effective than MT significantly. Conclusions: The anti-inflammatory effect was the best in the SOT and lower esophageal sphincter muscle contraction was the best in the ACT at the rat reflux esophagitis. Sepiae OS was more effective than esomeprazole in the suppression of iNOS, $TNF-{\alpha}$, and IL-6.

• 한국미생물·생명공학회지
• /
• 제6권3호
• /
• pp.121-127
• /
• 1978

PDase의 생산하는 데에 탄소원으로 sucrose 3% 금속이온으로는 $Ca^{2+}$, Co$^{2+}$, $Mn^{2+}$ 이온등이 좋은 효과를 나타내 주었고 통기는 많을 수록 좋았으며 초기 pH 8의 배지에서 48시간 배양할 때 가장 좋은 결과를 나타내 주었다. 이렇게 하여 생산된 PDase는 pH 8 부근에서 작용온도 6$0^{\circ}C$일 때 최대효소 활성을 나타냈다.