• 한국농공학회지
• /
• 제35권1호
• /
• pp.29-39
• /
• 1993

A model for estimating daily effective rainfall of upland crops was developed. The infiltration process was described by Green-Ampt infiltration model developed by Chu(1978). The model considers delayed surface ponding and surface detention storage under a uniform soil profile. The Green-Ampt parameters, that is, average hydraulic conductivity and average capillary pressure head on a sandy loam soil were determined from field experiment using Air-entry permeameter developed by Bouwer(1966). The model was verified by comparing measured and simulated surface runoff. The ratios of effective rainfall to total rainfall for red pepper, soybean, sesame and Chinese cabbage were evaluated using Borg's root growth model( 1986) respectively. The followings are a summary of this study results; 1.In a sandy loam soil average hydraulic conductivity was 3.28cm/hr and average capillary pressure head was 3.00cm. 2.The root growth of upland crops could be expressed by Borg's root growth model successively. 3.The measured and simulated surface runoff was agreed well with each other. 4.As the rainfall amount was increased, the ratio of effective rainfall to total rainfall was decreased exponentially till a certain growing period.

• 대한기계학회논문집B
• /
• 제23권7호
• /
• pp.811-819
• /
• 1999

A theoretical model to predict the effective thermal conductivity of sands Is developed by considering the participating heat transfer mechanisms and their relationship to the model geometry. Comparison between the calculations and the measurements indicates that the assumptions to introduce two model constants (${\phi}_{af}$ and ${\delta}$) for model development were justified. As a results, the model was proved to predict the effective thermal conductivities of 2- and 3-component systems of two silica sands saturated with fluids or bonded with liquid binders in a reasonable accuracy.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권9호
• /
• pp.431-439
• /
• 2001

This Paper illustrates a new numerical analysis method using a nodal effective load model for nodal probabilistic production cost simulation of the load point in a composite power system. The new effective load model includes capacities and uncertainties of generators as well as transmission lines. The CMELDC(composite power system effective load duration curve) based on the new effective load model at HLll(Hierarchical Level H) has been developed also. The CMELDC can be obtained from convolution integral processing of the outage capacity probabilistic distribution function of the fictitious generator and the original load duration curve given at the load point. It is expected that the new model for the CMELDC proposed in this study will provide some solutions to many problems based on nodal and decentralized operation and control of an electric power systems under competition environment in future. The CMELDC based on the new model at HLll will extend the application areas of nodal probabilistic production cost simulation, outage cost assessment and reliability evaluation etc. at load points. The characteristics and effectiveness of this new model are illustrated by a case study of MRBTS(Modified Roy Billinton Test System).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.51-58
• /
• 2008

The George Massey immersed tunnel passes the Fraser River near Vancouver, Western Canada. In this paper, dynamic analysis of the tunnel on sandy soils was performed using an effective stress constitutive model called UBCSAND. This model is able to calculate pore pressure rise and resulting tunnel deformation due to cyclic loading. Centrifuge tests conducted at RPI are used to verify the model performance. Centrifuge tests consist of 3 models: Model 1 is designed for an original ground condition, Model 2 for a ground improvement by compaction method, Model 3 for a ground improvement by gravel drainage. The results of centrifuge Model 1 are presented and compared with predictions of UBCSAND model. This model well captured the results of centrifuge test and therefore can be used to predict dynamic behavior of similar tunnels or underground structures on sandy soils.

• Journal of the Korean Data and Information Science Society
• /
• 제19권2호
• /
• pp.463-473
• /
• 2008

In this study, we measure damage depth and calculate effective impact speed in case of rear-end collision using real car insurance data. We study the relationship between demage depth and effective impact speed, and present statistical model for these two variables. In our real data study, 3-degree polynomial equation model is better fit to effective impact speed and demage depth than the simple linear model that are estimated in previous other studies. Damage depth is a major factor to see the extent of impact in a car collision, and by using this equation, it is possible to evaluate the severity of driver's injury.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.201-208
• /
• 2000

In this study, the behavior of saturated sandy soils under dynamic loads - pore water pressure and effective stress - was investigated using Disturbed State Concept(DSC) model. The model parameters are evaluated from laboratory test data. During the process of loading and reverse loading, DSC model is utilized to trace strain-hardening and cyclic softening behavior. The procedure of back prediction proposed in this study are verified by comparing with laboratory test results. From the back prediction of pore water pressure and effective mean pressure under cyclic loading, excess pore water pressure increases up to initial effective confining pressure and effective mean pressure decrease close to zero in good greement with laboratory test results. Those results represent the liquefaction of saturated sandy soils under dynamic loads. The number of cycles at initial liquefaction using the model prediction is in good agreement with laboratory test results. Therefore, the results of this study state that the liquefaction of saturated sandy soils can be explained by the effective tress analysis.

• 대한전자공학회논문지SD
• /
• 제41권7호
• /
• pp.31-36
• /
• 2004

Vortical-Cavity Surface-Emitting Laser(VCSEL)는 in-plane 형태의 레이저와는 달리 여러 층의 distributed Bragg reflector(DBR) mirror를 반사 면으로 사용하기 때문에 광출력이나 미분양자효율(differential quantum efficiency)을 계산하는 데에 많은 어려움이 따른다. 이러한 이유로 광출력, 광출력 비 및 미분양자효율 등의 성능 지수를 계산하는 방법으로 유효 공진기 모델과 전달행렬 방법(transfer matrix method) 등이 사용되고 있다. 유효 공진기 모델은 반사율 및 문턱이득을 계산하는 데에는 적합하지만 광출력, 광출력 비 및 외부양자효율을 계산하는 데에는 오차를 보인다. 그 이유는 유효 공진기 모델이 금속 전극 개구부 바로 아래 GaAs 층에서의 빛의 흡수는 고려하지 못하기 때문이다. 이 논문에서는 유효 공진기 모델로부터 구한 성능 지수 값들을 전달행렬 방법으로부터 구한 값들과 비교ㆍ검토하여, 유효 공진기 모델의 타당성에 대하여 살펴보고 전달행렬 방법의 유용성을 재확인하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권1호
• /
• pp.45-54
• /
• 2020

One of the typical characteristics of smart media is that it is interactive, which shows a different form and property from the existing mass media, and also changes the way users use it. This change requires a different system from the existing method in the advertising process strategic model for effective interactive advertising in smart media. We attempted to derive an effective smart media interactive advertising process strategic model by understanding the interactive advertising processin smart media that is expected to continue to grow asthe main market of the advertising market and identifying the constituent factors. To this end, We analyzed the preminiary research results of interactive advertising and organized expert panels for the Delphi method and reflected their opinions and evaluations. The components and factors of interactive advertising were found and the effective interactive advertising process strategy model in smart media was derived from this study.

• Tribology and Lubricants
• /
• 제36권6호
• /
• pp.320-323
• /
• 2020

Thin film coatings are commonly exploited to minimize wear and optimize the frictional behavior of various precision mechanical systems. The enhancement of thin film durability is directly related to the performance maximization of the system. Therefore, a fine approach to analyze the thin film wear behavior is required. Archard's equation is a representative and well-developed law that defines the wear coefficient, which is the probability of creating wear particles. A ploughing model is a commonly used model to determine the friction force during the abrasive contact. The equations demonstrate that the friction force and wear coefficient are inversely proportional to the hardness of the material. In this study, Archard's equation and ploughing models are modified with an effective hardness to minimize the gap between the experimental and numerical results. It is noted that the effective hardness is the hardness variation with respect to the penetration depth owing to the substrate effect. The nanoindentation method is utilized to characterize the effective hardness of Cu film. The wear coefficient value considering the effective hardness is more than three times higher than that without considering the effective hardness. The friction force predicted with the effective hardness agreed better with the results obtained directly from the friction force detecting sensor. This outcome is expected to improve the accuracy of friction and wear amount predictions.

• 한국항공운항학회지
• /
• 제14권4호
• /
• pp.11-16
• /
• 2006

The wind turbine rotor blade is faced with various aeroelastic problem as rotor blades become bigger and lighter by the use the composite material. The aeroelastic analysis of a wind turbine rotor blade requires its aerodynamic model and structural model. For effective aeroelastic analysis, it is required the simple and effective structural model of the blade. In the present study, we introduce the effective equivalent structural modeling of the blade for aeroelastic analysis. The equivalent beam model of the composite blade based on its 3D finite element model is established. The free vibration analysis shows that the equivalent beam model of the blade is equivalent to its 3D finite element model.