• International Journal of Industrial Entomology and Biomaterials
• /
• v.45 no.1
• /
• pp.22-28
• /
• 2022

Silkworms are very sensitive to changes in temperature and humidity, and unless it is a suitable temperature and humidity to grow, the productivity and quality of silkworms are greatly reduced. Therefore, it is very important to manage temperature and humidity for silkworm feeding facilities. In particular, it is essential to install heating facilities in Asian countries with distinct seasonal changes. During the feeding period, many farms manage the temperature and humidity of feeding facilities by installing and using electric heaters inside the facilities. However, it is very difficult to manage the room temperature stably by the heaters. In addition, unlike the temperature inside the facility, silkworms could undergo severe temperature changes as the inside of the rearing tray could not be warm enough. In this study, in order to improve the previous heating method, the new rearing method that directly heats the bottom of the rearing tray was developed. Compared to the previous room-heating system, the novel heater-installed tray (HIT) system significantly reduced the change in temperature during the experimental period. In addition, the number of days of silkworm growth up to harvest was shortened, which was effective in growth performance, and it was also found that silkworms grew more uniformly in HIT system than in previous system. Moreover, as the heater tubes were installed directly under the rearing tray, it quickly dried mulberry leaves and silkworm feces after feeding, and as a result, the environment in the tray was greatly improved with decrease the labor of breeder. In conclusion, these results suggest that the heater-installed rearing tray method greatly improves silkworm quality, increases weight of silkworms, and final profits compared to the previous room heating system with electric heaters.

• Particle and aerosol research
• /
• v.19 no.3
• /
• pp.53-62
• /
• 2023

This study compared the collection efficiency of a two-stage electrostatic precipitator (ESP) with a lightweight PET film-coated carbon electrode collector plate, depending on the relative humidity of the exhaust gas and the applied voltage to the pre-charger. It was confirmed that the onset voltage at which corona discharge occurs decreases and the discharge current decreases at the same voltage as the relative humidity increases. On the other hand, even though there was almost no change in the diameter of the particles generated depending on the relative humidity, the efficiency was higher at the same voltage as the relative humidity increased. In addition, by applying a two-stage ESP structure, the collection efficiency was higher than that of a single-stage electrostatic precipitator under the same conditions. The ESP using the carbon electrode coated with PET film used in this study is expected to be effective in various aspects such as weight and in the current situation where environmental regulations are rapidly tightening.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2597-2602
• /
• 2015

With the development of economy and improving of people's living standards, people dietary needs will be achieved from subsistence to high nutrition and from high nutrition to healthy transformation. Mushroom as a kind of highly nutritious, low fat, rich vitamin food has a great interest among the people. This makes the mushroom into a new sunrise industry and it gradually from pure manual cultivation develops toward the fully automatic factory. In the process of mushroom factory production, regulation of environmental factors directly affects the yield and quality of mushroom. In related to the methods of mushroom cultivation, the recent technologies apply the new technology such as sensors and IT convergence services. And then cultivating mushroom is managed effectively. This paper in order to solve the above problems and construct an effective mushroom growth environment using technology such as humidity sensor construct an environment that can automatically adjust the humidity. This environment has important significance to improve the level of automation mushroom production, increase yield per unit area and quality of mushroom, increase economic efficiency of mushroom production, and enhance the competitiveness of mushroom production.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.554-566
• /
• 2010

We present optical and microphysical particle properties of aerosol retrieved by multi-wavelength Raman lidar at Anmyun island ($36.32^{\circ}N$, $126.19^{\circ}E$), Korea. The results present aerosol properties in various height layers of the atmospheric pollution layers observed over the Korean peninsula on eight consecutive days (27, 28, 29, 30 and 31 May, 4, 5 and 7 June) in 2005 at Anmyun island. We found anthropogenic pollution on 27, 28, and 29 May and local haze on other measurement days. The origin of the particle plumes was determined by simulations of FLEXPART. The source regions of the particles resulted in rather clear differences between the optical and microphysical properties of the pollution layers. The single-scattering albedo of anthropogenic aerosols from China ($0.91{\pm}0.01$ at 532 nm) were lower than the single-scattering albedo of local haze aerosols ($0.95{\pm}0.01$ at 532 nm). Local haze aerosols show larger effective radii of $0.24{\pm}0.02\;{\mu}m$ at relative humidity of 55~75%. The effective radii of anthropogenic aerosols are $0.20{\pm}0.2\;{\mu}m$ and $0.27\;{\mu}m$ at relative humidity of 25~50%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.188-189
• /
• 2019

In this study, the characteristics of single-component and other sealant were analyzed to provide repair methods and effective utilization of sealant due to crack generation. Humidity studies have shown that acrylic silicone is effective in many areas of fluidity and temperature change, and that polysulfide-silicon is most effective in resistance to linear expansion coefficient and external pressure. Therefore, the difference between drying shrinkage and thermal expansion coefficient between various building materials and sealant, as well as the use of sealant, is analyzed, and construction methods derived accordingly, and prevention of defects are considered to be part of the construction project.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.125-129
• /
• 1997

The effects of the moisture and thermal annealing on CLBO crystal have been investigated. CLBO has hydrated at high humidity condition, resulting in 5B$_2$O$_3$$.$Cs$_2$O$.$8H$_2$O. The surface hydration seems to induce the cracking and the refractive index change in CLBO. The thermal annealing is effective to restore the changed index.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1994.05a
• /
• pp.96-97
• /
• 1994

하절기 시설재배는 35$^{\circ}C$가 넘는 극한고온으로 인하여 작물재배가 거의 불가능하며 작물재배를 하더라도 생산한 농산물은 그 품질이 열악하여 상품으로서의 가치가 낮아 문제가 되고있다. 따라서 하절기 시설작형은 대부분 휴작을 하므로 시설의 주년이용과 고도활용에 지장을 초래하고있다. 하절기에 국내의 온도하강은 주로 수동적이고 소극적이면서 비용이 적게드는 흑색차광망이나 자연환기에 주로 의존하고있으나 그 효율성은 상당히 낮아 문제가 되고있다. (중략)

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.286-290
• /
• 2001

This study was carried out to develope dehumidifier using underground water for controling moisture in greenhouse. The dehumidifier was designed as horizontal shell type condenser, and experiment was carried out with evaporative cooling system. In shading condition, evaporative cooling with the dehumidifier makes decrease of relative humidity and temperature in the down place of greenhouse than without dehumidifier, so it is expect that the dehumidifier is useful for effective evaporative cooling.

• Food Science and Preservation
• /
• v.10 no.3
• /
• pp.297-301
• /
• 2003

The hardness of corrugated packaging box decreased during storage period because of high humidity. Therefore, the strength-decreasing factor of corrugated packaging box had to be investigated to determine the compression strength of the corrugated packaging box. This study was conducted to define the characteristics of moisture absorption as well as compression strength of corrugated fiberboard. (1) The moisture content of the corrugated fiberboard was rarely influenced by the kinds of raw materials and water repellent. However, the moisture adsorption of the corrugated fiberboard was shown to be clearly affected by air temperature changes. (2) The moisture content of the corrugated fiberboard was significantly affected by relative humidity. The moisture adsorption of corrugated fiberboard was also greatly influenced by composition of raw materials rather than water repellent. The results indicated that the improvement of raw materials was more effective than the increase of water repellent of corrugated fiberboard to reduce the moisture adsorption of the corrugated fiberboard. (3) The vertical compression strength was significantly decreased with increasing relative humidity. The reduction rate of vertical compression strength was not charged with the increase of relative humidity, which was regardless of kinds of corrugated fiberboard. (4) For improving the strength of the corrugated packaging box, new technique should be found to develop better quality of raw materials. Moreover, the physical construction of corrugated packaging box should be clearly understood because the corrugated packaging box for the agricultural products was usually used for the circumstances of high humidity and low air temperature

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.1
• /
• pp.104-118
• /
• 1995

This study was performed to evaluate factors affecting desorption of organic solvents collected on charcoal tube and to find out the optimum condition. Desorption efficiency for polar analytes was improved when several polar desorption solvents such as methanol, dimethylformamide(DMF), 2-(2-butoxyethoxy)ethanol were added to carbon disulfide($CS_2$). The best improvement was achieved when 10% dimethylformamide(DMF) in $CS_2$ was used as desorption solvent. During storage of polar analytes, recovery was greatly reduced. Especially, the recovery of cyclohexanone was decreased to 18.1 % after a month storage at $34^{\circ}C$. After two weeks storage, recovery of polar analytes was sharply decreased. Water adsorbed on charcoal interfered the recovery of polar analytes but didn't interfere that one of nonpolar solvent, toluene. When 10% DMF in $CS_2$ was used as desorption solvent, the effect of water on recovery was decreased, comparing with Desorption efficiency increased when analyte loading increased, and usage of 10% DMF in $CS_2$ decreased the loading effect. Increasing volume of desorption solvent was not effective to improve desorption efficiency of analytes when 10% DMF was used. Continuous shaking and sonication is not helpful to increase the desorption efficiency of analytes except cyclohexanone using 10% DMF. When silica gel used as adsorbent, methanol was better desorbent than dimethylsulfoxide. Analytes adsorbed on silica gel showed high recovery in low concentration and less affected by humidity. On the basis of this study, the following conclusions have been drawn. To improve the recovery of polar organic materials in air samples, it is necessary to analyze samples as soon as possible after they were collected. Otherwise, samples must be stored at low temperature. Using two components of desorption solvents, such as 10% DMF in $CS_2$, the effects of loading and humidity decreased for polar analytes such as methyl ethyl ketone and methyl isobutyl ketone. When work place has high humidity with low concentration of polar organic solvents, silica gel can be used as adsorbent, because it produces quantitative recovery for polar analytes at this condition. But it should be noted that high humidity makes breakthrough easy in silica gel samples.