• 대한기계학회논문집
• /
• 제11권3호
• /
• pp.444-453
• /
• 1987

본 연구에서는 난류구조에 대한 유선곡률의 영향을 명확히 반영하는 적절한 곡률수정 2-방정식모델을 개발하고자 한다. 이 연구에서 제안된 모델의 타당성은 다 음의 2차원 재순환유동에 대한 실험결과와 계산결과의 비교를 통해서 입증될 것이다. (1) Moss와 Bake에 의하여 맥동열선 풍속계로 측정된 두꺼운 수직벽주위의 유동` (2) 레이저 도플러 속도계로 Fraser와 Siddig에 의해 측정된 얇은 수직벽유동` (3)맥동열 선 풍속계로 Eaton이 실험한 후면벽유동` (4)맥동열선 풍속계로 Moss와 Baker가 측정 한 전면벽유동. 새로운 곡률수정 2-방정식모델은 2장에서 설명되고 있으며, 3장에서 는 경계조건과 수치계산 과정이 간단이 기술되어 있다. 그 뒤에 4장에는 계산결과와 실험치에대한 비교검토가 설명되어 있고 마지막으로 5장에서는 본 연구에 대한 결론을 맺고 있다.

• 한국재난정보학회 논문집
• /
• 제19권3호
• /
• pp.572-581
• /
• 2023

연구목적:이력형 댐퍼에 하중이 작용할 때 편심에 의해서 부재가 면외 방향으로 거동하는 것을 방지하여 응력-변형율 곡선의 불규칙성을 개선하고 감쇠효과의 계산 시 정확성을 기하고자 하는 것이 본 연구의 목적이다. 연구방법:본 연구에서 사용하는 강재 스트립의 제원은 동일하게 하되 각각의 댐퍼를 구성할 스트립의 곡률은 다르게 한다. 곡률이 다른 각각의 강재 스트립을 댐퍼 1개당 3개씩 정삼각형으로 배치하여 곡률이 다른 5개의 댐퍼를 제작한 후 반복하중 실험을 수행하고, 에너지 소산량을 계산하여 댐퍼의 감쇠성능을 측정하였다. 연구결과: 시험 결과, 댐퍼 중에서 초기곡률이 조금이라도 있는 경우는 없는 경우보다 에너지 소산량은 상당히 감소하지만, 곡률의 크기에 따른 에너지 소산량의 변화는 크지 않으며, 곡률의 유무가 중요한 변수로 사료된다. 결론:댐퍼를 적용한 해석적 검토에서 주기는 T=0.3sec에서 T=0.536sec로 약 78.7% 정도 장주기화 되었고, 응답 스펙트럼 가속도는 Sa=0.54g에서 Sa =0.229g로 줄었으므로 댐퍼의 감쇠효과는 충분히 존재한다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.123-124
• /
• 2002

A press shoe is an element of a machine for squeezing water from wood pulp in the field of manufacturing paper. This is used to compress the pulp enveloped by felt sheet with a large roller. The squeezing force is made by hydraulic pressure. The press shoe has a mechanism similar to a partial hydrostatic bearing. The pressure profile between press shoe and roller affects their squeezing ability, and partial peak pressure can tear the wet pulp. The curvature of the surface of press shoe varies to reduce the peak pressure and increase the mean pressure simultaneously. Therefore, the prediction of pressure distribution considering partially changed curvature of hydrostatic bearing is very important for designing the press shoe. In this study, the difference formulation of Reynolds' equation for partial hydrostatic bearing is by direct numerical method and a computer program to calculate the pressure distribution is developed. We investigate the effect of partially changed curvature of bearing surface on the pressure distribution. Other design parameter for hydrostatic bearing such as depth of pocket and relative velocity are also studied.

• KSTLE International Journal
• /
• 제3권2호
• /
• pp.90-94
• /
• 2002

A press shoe is an element of a machine for squeezing water from wood pulp in the field of manufacturing paper. This is used to compress the pulp enveloped by felt sheet with a large roller. The squeezing farce is made by hydraulic pressure. The press shoe has a mechanism similar to a partial hydrostatic bearing. The pressure profile between press shoe and roller affects their squeezing ability, and partial peak pressure can tear the wet pulp. The curvature of the surface of press shoe varies to reduce the peak pressure and increase the mean pressure simultaneously, Therefore, the prediction of pressure distribution considering partially changed curvature of hydrostatic bearing is very important far designing the press shoe. In this study, the difference formulation of Reynolds equation far partial hydrostatic bearing is derived by direct numerical method and a computer program to calculate the pressure distribution is developed. We investigate the effect of partially changed curvature of bearing surface on the pressure distribution. Other design parameter far hydrostatic bearing such as depth of pocket and relative velocity are also studied.

• 한국전산유체공학회지
• /
• 제20권1호
• /
• pp.39-46
• /
• 2015

In this research, we studied the pressure drop affecting on the internal surface roughness and the curvature radius of a U-tube, which is used for the cooling system in PWR(Pressurized Water Reactor). Using ANSYS-FLUENT, a commercial code based on CFD(Computational Fluid Dynamics) technique, we compared a Moody chart with the Darcy friction factor changed by a range of various surface roughness and Reynolds numbers of a straight pipe model. We studied the effect giving variation about a range of various surface roughness and the curvature radius of the full scale U-tube model. The material of the heat transfer tube is Inconel 690 used in the steam generator. We compared the velocity distribution of selected 4 locations, and derived the correlation between the surface roughness and the pressure drop for the U-tube of each representative curvature radius using the linear regression method.

• 한국안전학회지
• /
• 제31권6호
• /
• pp.6-11
• /
• 2016

CFRP composite laminates are widely used as structural materials for airplanes, automobile and aerospace vehicles because of their high strength and stiffness. This study aims to examine an effect of curvature on the penetration fracture characteristic of an orthotropic composite laminated shell. For the purpose, we manufactured orthotropic CFRP shell specimen with different curvatures, and conducted a penetration test using an air-gun. Those specimens were prepared to varied curvature radius(${\infty}$, 200mm, 150mm and 100mm)and were stacked to $[O^{\circ}{_3}/90^{\circ}{_3}]_s$. When the specimen is subjected to transverse impact by a steel sphere(${\Phi}10$), the velocity of steel sphere was measured both before and after impact by determining the time for it to pass two ball-screen sensors located a known distance apart. As the curvature increases, the absorption energy and the critical penetration energy increased linearly because the resistance to the bending moment. Patterns of cracks caused by the penetration of CFRP laminated shells included fiber breakage, lamina fracture, matrix crack interlaminar crack and intralaminar crack.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.295-298
• /
• 2000

In this research, a novel sampling strategy for a CMM to inspect freeform surfaces is proposed. Unlike primitive surfaces, it is not easy to determine the number of sampling points and their locations for inspecting freeform surfaces. Since a CMM operates with slower speed in measurement than optical measuring devices, it is important to optimize the number and the locations of sampling points in the inspection process. When a complete inspection of a surface is required, it becomes more critical. Among various factors to cause shape errors of a final product, curvature characteristic is essential due to its effect such as stair-step errors in rapid prototyping and interpolation errors in NC tool paths generation. Shape errors are defined in terms of the average and standard deviation of differences between an original model and a produced part. Proposed algorithms determine the locations of sampling points by analyzing curvature distribution of a given surface. Based on the curvature distribution, a surface area is divided into several sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number of sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number os sub-areas is determined by estimating the average of curvatures. Finally, the proposed method is applied to several surfaces that have shape errors for verification.

• 소음진동
• /
• 제10권2호
• /
• pp.353-360
• /
• 2000

Numerical methods are developed for calculating the natural frequencies and mode shapes of the tapered cantilever arches with variable curvature. The differential equations governing the free vibrations of such arches are derived and solved numerically, in which the effect of rotatory inertia is included. The parabolic shape is chosen as the arch with variable curvature while both the prime and quadratic arched members are considered as the tapered arch with variable curvature while both the prime and quadratic arched members are considered as the tapered arch. Comparisons the natural jfrequencies between this study and finite element method SAP 90 seve to validate the numerical method developed herein. The lowest four natural frequencies are reported as a function of four non-dimensional system parameters. The effects of both the rotatory inertia and cross-sectional shape are reported. Also, the typical mode shapes of stress resultants as well as the displacements are reported.

• 척추신경추나의학회지
• /
• 제7권1호
• /
• pp.95-101
• /
• 2012

Objectives : This study is performed to evaluate the clinical effect of Chuna therapy on the neck pain associated with kypotic cervical curvature. Methods : This study carried out on two patients with neck pain & kyphotic cervical curvature who have received treatment in Department of Oriental Rehabilitation Medicine, Dong-seo Oriental Medical hospital from 4th April 2011 to 26th May 2012. Pre and post treatment, We evaluated the cervical angle, Jackson's angle, Jochumsen method, VAS and effective score of treatment. Results & Conclusions : Two patients who received Chuna treatment recovered cervical curvature and improved neck pain.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.691-699
• /
• 1997

The effects of concave hemispherical surface curvature on the local heat transfer from a turbulent round impinging jet were experimentally investigated. The liquid crystal transient method was used for these measurements. This method, which is a variation on the transient method, suddenly exposes a preheated wall to an impinging jet while video recording the response of liquid crystals for the measurement of the surface temperature. The Reynolds number ranges from Re=11,000 to 50,000, the nozzle-to- surface distance from L/d=2 to 10, and the surface curvature from D/d=6 to 12.The present results are also compared to those for the flat plate case. In the experiment, the local Nusselt numbers tend to increase in all regions with an increasing surface curvature. The maximum Nusselt number for all Reynolds numbers occurred at L/d .ident. 6 and a second maximum in the Nusselt number occurred at R/d .ident. 2 for both Re=23,000 and Re=50,000 in the case of L/d=2 and for Re=50,000 only in the case of L/d=4. Meanwhile, as the surface curvature increases, the value of the secondary maximum Nusselt number decreases. All the other cases exhibit monotonically decreasing values of the Nusselt number along the curved surface. The stagnation point Nusselt numbers are well correlated with Re, L/d, and D/d.