• Journal of Korea Foundry Society
• /
• v.20 no.6
• /
• pp.377-385
• /
• 2000

Al matrix composites as the most promising MMCs can be expected to be excellent engineering materials in the nearest future. So as to improve material properties of composite, many manufacturing processes have been developed. Among them, squeeze casting process which offers fine microstructure and near-net-shape is one of the most successful MMCs manufacturing processes. But, in case of with subsieve size particles (under 44 ${\mu}m$), it is very difficult to homogeneously distribute particles in matrix of Al matrix composite by various casting processes, including squeeze casting used so far. Duplex process which was developed in previous study was used to distribute the particle of subsieve size more homogeneously in matrix of Al matrix composite. Microstructures, wear and heat resistance characterization of Al-Si-Cu-Mg-(Ni)/SiCp manufactured by duplex process were examined to clarify the effect of manufacturing conditions, particle size of reinforcement and alloying elements. Al matrix composites reinforced with SiCp(10 ${\mu}m$) have the lowest wear amount among composites reinforced with 3 ${\mu}m$, 5 ${\mu}m$ and 10 ${\mu}m$ SiCp. The wear amount of Al matrix composites with 10 wt.% SiCp(3, 5, 10 ${\mu}m$) was decreased according to the increase of the sliding speed because abrasive wear takes place at high sliding speed of 4m/s and worn debris with block type occurs at low sliding speed of 1m/s. As for heat resistance, it is made clear that remarkable heat resistance property can be obtained by addition of Ni element in Al matrix composites.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3223-3228
• /
• 2011

To quantify the presence of mercuric ions in aqueous solution, double-stranded DNA (dsDNA) of poly(dT) was employed using a light switch compound, $Ru(phen)_2(dppz)^{2+}$ (1) which is reported to intercalate into dsDNA of a right-handed B-form. Addition of mercuric ions induced the dehybridization of poly(dT)${\cdot}$poly(dA) duplexes to form a hairpin structure of poly(dT) at room temperature and the metal-to-ligand charge transfer emission derived from the intercalation of 1 was reduced due to the dehybridization of dsDNA. As the concentration of $Hg^{2+}$ was increased, the emission of 1 progressively decreased. This label-free emission method had a detection limit of 0.2 nM. Other metal ions, such as $K^+$, $Ag^+$, $Ca^{2+}$, $Mg^{2+}$, $Zn^{2+}$, $Mn^{2+}$, $Co^{2+}$, $Ni^{2+}$, $Cu^{2+}$, $Cd^{2+}$, $Cr^{3+}$, $Fe^{3+}$, had no significant effect on reducing emission. This emission method can differentiate matched and mismatched poly(dT) sequences based on the emission intensity of dsDNA.

• Archives of Pharmacal Research
• /
• v.28 no.7
• /
• pp.816-822
• /
• 2005

Catharsius protease-2 (CPM-2) was isolated from the body of dung beetles, Catharsius molossus, using a three step purification process (ammonium sulfate fractionation, gel filtration on Bio-Gel P-60, and affinity chromatography on DEAE Affi-Gel blue). The purified CPM-2, having a molecular weight of 24 kDa, was assessed homogeneously by SDS-polyacrylamide gel electrophoresis. The N-terminal amino acid sequence of CPM-2 was composed of X Val Gin Asp Phe Val Glu Glu lie Leu. CPM-2 was inactivated by $Cu^{2+}\;and\;Zn^{2+}$ and strongly inhibited by typical serine proteinase inhibitors such as TLCK, soybean trypsin inhibitor, aprotinin, benzamidine, and ${\alpha}_1$-antitrypsin. However, EDTA, EGTA, cysteine, $\beta$-mercaptoethanol, E64, and elastatinal had little effect on enzyme activity. In addition, antiplasmin and antithrombin III were not sensitive to CPM-2. Based on the results of a fibrinolytic activity test, CPM-2 readily cleaved $A{\alpha}-$ and $B{\beta}$-chains of fibrinogen and fibrin, and y-chain of fibrinogen more slowly. The nonspecific action of the enzyme resulted in extensive hydrolysis, releasing a variety of fibrinopeptides of fibrinogen and fibrin. Polyclonal antibodies of CPM-2 were reactive to the native form of antigen. The ELISA was applied to detect quantities, in nanograms, of the antigen in CPM-2 protein.

• Ocean and Polar Research
• /
• v.25 no.1
• /
• pp.21-30
• /
• 2003

Seasonal fluctuations of physico-chemical and biological aspects of the environment were studied in Vladivostok harbour (Golden Horn Bay, the East Sea/Sea of Japan). The benthic community structure was described with a focus on size-spectra (bacteria, meio- and macrofauna) related with the chemical environment and chemical fluxes in sediment and to reveal their possible ecological role in the process of bioremediation of the environment. Samples from two sites with different concentrations of heavy metals (Fe, Zn, Cu, Pb, Mn, Cr, Ni Cd, Co) and petroleum hydrocarbon were assessed by a number of methods. These included plate counts of culturable bacteria, observation through a scanning electron (SEM) and transmission electron microscope (TEM). These approaches were complemented with microscopic assessments of the diversity of the benthic community. The specific communities had a limited number of species, tolerant to abnormally high levels of toxic compounds. The dominant species were presented by several sho.1-lived small polychaetes (Capitella capitata) and nematodes (Oncholaimium ramosum). The highest population density was recorded in microbenthos, in various diatoms, various physiological groups of bacteria which participate in biomineralization: marine heterotrophic bacteria, which oxidized oil, black oil in addition to groups resistant to heavy metals. They have the entire set of mechanisms for neutralizing the negative effect of those compounds, forming the detrital food web and biogeochemical circulation of material in sediments, which results in the biological self-recycling of sea basins. Macro- and meiobenthic organisms were more sensitive to a greater extent of $H_2S$ and petroleum hydrocarbons than to metal content, but the within-site rankings were the same as those achieved for microbiological analyses.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.4
• /
• pp.265-273
• /
• 2017

Solid-state alkaline water electrolysis is a promising method for producing hydrogen using renewable energy sources such as wind and solar power. Despite active investigations of component development for anion exchange membrane water electrolysis (AEMWE), understanding of the device performance remains insufficient for the commercialization of AEMWE. The study of assembled AEMWE devices is essential to validate the activity and stability of developed catalysts and electrolyte membranes, as well as the dependence of the performance on the device operating conditions. Herein, we review the development of catalysts and membranes reported by different AEMWE companies such as ACTA S.p.A. and Proton OnSite and device operating conditions that significantly affect the AEMWE performance. For example, $CuCoO_x$ and $LiCoO_2$ have been studied as oxygen evolution catalysts by Acta S.p.A and Proton OnSite, respectively. Anion exchange membranes based on polyethylene and polysulfone are also investigated for use as electrolyte membranes in AEMWE devices. In addition, operation factors, including temperature, electrolyte concentration and acidity, and solution feed methods, are reviewed in terms of their influence on the AEMWE performance. The reaction rate of water splitting generally increases with increase in operating temperature because of the facilitated kinetics and higher ion conductivity. The effect of solution feeding configuration on the AEMWE performance is explained, with a brief discussion on current AEMWE performance and device durability.

• BMB Reports
• /
• v.32 no.6
• /
• pp.585-593
• /
• 1999

The water and methanol extracts of Artemisia argyi showed significant cytotoxicities against J774A.1 cells but not so much against normal leukocytes. The cytotoxicities were found to be dependent on the extract concentration and the incubation time. The concentration of water and methanol extracts inhibiting 50% of cell proliferation ($IC_{50}$) were estimated to be 44.2 mg/ml and 71.6 mg/ml, respectively. In the presence of Artemisia argyi water extract, total superoxide dismutase (CuZnSOD and MnSOD) activities of media, cytoplasmic and mitochondrial fractions of J774A.1 cells increased in accordance with cytotoxicity. MnSOD was found to be the main component of enhanced total SOD activities, particulary in the mitochondrial fraction. In contrast to SOD, catalase and glutathione peroxidase (GPx) were not found in any instance of the current investigation. In addition, substantial amount of $O_2^-$ appeared to be generated in the mitochondrial fraction under the influence of Artemisia argyi. All data put together, it is postulated that Artemisia argyi extracts seem to stimulate $O_2^-$ generation in mitochondria of J774A.1 cells with concomitant increases of SODs. Since $H_2O_2$, the reaction product of SOD on $O_2^-$, is known to be readily converted to very toxic $OH{\cdot}$ in the absence of catalase and/or GPx cooperation, toxicity derived from ROS such as $O_2^-$, $H_2O_2$, and $OH{\cdot}$ may be the main cause of necrosis and/or apoptosis of J774A.1 cells.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.350-356
• /
• 2003

The mechanism of the decomposition of a bronchodilator, S-nitroso-N-acetyl-D,L-penicillamine (SNAP) by a bronchoconstrictor, aqueous sulfite, has been investigated in detail. The decomposition was studied using a conventional spectrophotometer at 336 nm over the ranges: 0.010 ≤ $[S^{IV}]_T$ ≤ 0.045 mol $dm^{-3}$, 3.96 ≤ pH ≤ 6.80 and 15.0 ≤ θ≤ 30.0 ℃, 0.60 ≤ I ≤ 1.00 mol $dm^{-3}$, and at ionic strength 1.00 mol $dm^{-3}$ (NaCl). The rate of reaction is dependent on the total sulfite concentration and pH in a complex manner, i.e., $k_{obs}\;=\;k_1K_2[S^{IV}]_T/ ([H^+]\;+\;K_2)$. At 25.0 ℃, the second order rate constant, $k_1$, was determined as $12.5\;{\pm}\;0.15\;mol^{-1}\;dm^3\;s^{-1}$. ${\Delta}H^{neq}\;=\;+32\;{\pm}\;3 kJ\;mol^{-1}\;and\;{\Delta}S^{\neq}\;=\;-138\;{\pm}\;13\;J\;mol^{-1}K^{-1}$. The N-nitrosohydroxylamine-N-sulfonate ion was detected as an intermediate before the formation of any of the by-products, namely, N-acetyl-D,L-penicillamine. The effect of concentration of aqueous copper(Ⅱ) ions on this reaction was also examined at pH 4.75, but there was no dependence on $[Cu^{2+}]$. In addition, the $pK_a$ of SNAP was determined as 3.51 ± 0.06 at 25.4 ℃ [I = 1.0 mol $dm^{-3}$ (NaCl)].

• Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.16-20
• /
• 2007

Toxicity of metal plating wastewater was evaluated by using acute toxicity tests on Daphnia magna. To identify toxicants of metal plating wastewater, several manipulations such as solid phase extraction (SPE), ion exchange and graduated pH adjustment were used. The SPE test had no significant effect on baseline toxicity, suggesting absence of toxic non-polar organics in metal plating wastewater. However, anion exchange largely decreased the baseline toxicity by 88%, indicating the causative toxicants were inorganic anions. Considering high concentration of chromium in metal plating wastewater, it is thought the anion is Cr(VI) species. Graduated pH test showing independence of the toxicity on pH change strongly supports this assumption. However, as revealed by toxicity confirmation experiment, the initial toxicity of metal plating wastewater (24-h TU=435) was not explained only by Cr(VI) (24-h TU = 725 at $280\;mg\;L^{-1}$). Addition of nickel($29.5\;mg\;L^{-1}$) and copper ($26.5\;mg\;L^{-1}$) largely decreased the chromium toxicity up to 417 TU, indicating antagonistic interaction between heavy metals. This heavy metal interaction was successfully predicted by an equation of 24-h $TU\;=\;3.67\;{\times}\;\ln([Cu]\;+\;[Ni])\;+\;79.44$ at a fixed concentration of chromium.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.4
• /
• pp.387-396
• /
• 2012

A study was conducted to determine the dietary effects of Na-bentonite (NaB) and probiotics on meat characteristics and health of Hanwoo steers fed rice straw as a sole roughage source. A total of 24 growing Hanwoo steers (avg BW 232 kg) were assigned to two treatments which included a control diet (concentrate mix and rice straw) and a treatment diet (control diet + 0.5-1.0% NaB + 0.5-1.0% probiotics. The diets were fed for 22 months up to the time the animals were slaughtered. Dietary treatment increased (p<0.05) concentrations of trace minerals such as Zn, Cu, and Fe in the longissimus muscle compared to the control. The treatment diet did not affect cold carcass weight, yield traits such as backfat thickness, longissimus muscle area, yield index, yield grade and quality traits such as marbling score, meat color, fat color, texture, maturity and quality grade. Blood profiles of growing steers were within the normal ranges for healthy cattle. In conclusion, feeding a combination of clay mineral and probiotics to Hanwoo steers fed rice straw as a sole roughage source could have a desirable effect on improving trace mineral retention in longissimus muscle without any deleterious effects on carcass traits of steers.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.6
• /
• pp.260-268
• /
• 2015

The thermal barrier coating (TBC) for inner wall of liquid-fuel rocket combustor consists of NiCrAlY as bonding layer and $ZrO_2$ as a top layer. In most case, the plasma spray coating is used for TBC process and this process has inherent possibility of cracking due to large difference in thermal expansion coefficients among bonding layer, top layer and metal substrate. In this paper, we suggest crack-free TBC process by using a precise electrodeposition technique. Electrodeposited Ni-P/Cr double layer has similar thermal expansion coefficient to the Cu alloy substrate resulting in superior thermal barrier performance and high temperature oxidation resistance. We studied the effects of phosphorous concentrations (2.12 wt%, 6.97 wt%, and 10.53 wt%) on the annealing behavior ($750^{\circ}C$) of Ni-P samples and Cr double layered electrodeposits. Annealing temperature was simulated by combustion test condition. Also, we conducted SEM/EDS and XRD analysis for Ni-P/Cr samples. The results showed that the band layers between Ni-P and Cr are Ni and Cr, and has no formed with heat treatment. These band layers were solid solution of Cr and Ni which is formed by interdiffusion of both alloy elements. In addition, the P was not found in it. The thickness of band layer was increased with increasing annealing time. We expected that the band layer can improve the adhesion between Cr and Ni-P.