• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.4
• /
• pp.438-448
• /
• 2023

The concentrations of trace metals and organic matters in marine sediments collected from southeast Korean coastal areas were investigated. The primary purpose of this study was to evaluate the contamination status, spatial distribution and potential ecological risks associated with the physiochemical composition in the studied areas. We found that the concentrations of trace metals in marine sediments were as follows: Fe > Mn > Zn > Cr > Pb > Cu > As > Cd > Hg. According to the sediment quality guidelines (SQGs) of Korea, concentrations of Zn, Cr, Cu and Cd at all sampling sites were below threshold effect levels (TEL). However, concentrations of As, Hg, and Pb (i.e., at the 94-98% of sampling sites), were below the TEL. In addition, concentration factors (CF) in the surveyed area were found to be associated with low ecological risks, whereas As, Hg, and Cu showed moderate to high risk levels in some inner parts of the studied bays. Finally, the pollution load index (PLI) and ecological risk index (ERI) of the elucidated metals were linked to moderate ecological risk, pointing to the possibility of being deleterious to some benthic organisms.

• Journal of the Korean Ceramic Society
• /
• v.50 no.2
• /
• pp.157-162
• /
• 2013

The need for lead-free piezoceramics has caused a renewal of interest in $BaTiO_3$-based systems. Recently, it was found that ceramics in the $(Ba,Ca)(Zr,Ti)O_3$ system have properties comparable to those of $Pb(Zr,Ti)O_3$. However, these ceramics require rather high sintering temperatures of $1450-1550^{\circ}C$. In this work, the effect of $TiO_2$ and CuO addition on the sintering behavior, microstructure, dielectric and piezoelectric properties of $(Ba_{0.85}Ca_{0.15})(Zr_{0.1}Ti_{0.9})O_3$ (BCTZ) ceramics will be discussed. BCTZ ceramics were prepared by the mixed oxide route and 1 mol % of $TiO_2$ or CuO was added. Undoped and doped ceramics were sintered at $1350^{\circ}C$ for 1-5 h. CuO was found to be a very effective sintering aid, with samples sintered for 1 h at $1350^{\circ}C$ having a bulk density of 95% theoretical density; however the piezoelectric properties were greatly reduced, probably due to the small grain size.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.1
• /
• pp.25-31
• /
• 1997

Antioxidative activity of daidzin and puerarin isolated from Puerariae radix against oxidation of low density lipoprotein(LDL) was investigated. The concentration of daidzin at 100$\mu\textrm{g}$/$m\ell$ and puerarin at 60$\mu\textrm{g}$/$m\ell$ inhibited Cu$^{2+}$-mediated oxidation of LDL almost completely. The electrophoretic mobility of oxidized LDL by addition of daidzin(100$\mu\textrm{g}$/$m\ell$) and puerarin(60$\mu\textrm{g}$/$m\ell$) was faster than that of native LDL, but slower than that of oxidized LDL. The oxidized LDL induced by J774 or macrophage was inhibited strongly in the presence of 100$\mu\textrm{g}$/$m\ell$ daidzin and 60$\mu\textrm{g}$/$m\ell$ Puerarin. The formation of conjugated dienes in the oxidized LDL was strongly inhibited by 100$\mu\textrm{g}$/$m\ell$ daidzin and 60$\mu\textrm{g}$/$m\ell$ puerarin.n.

• Journal of Sasang Constitutional Medicine
• /
• v.24 no.4
• /
• pp.51-61
• /
• 2012

Objectives : The purpose of this study was to investigate the anti-atherosclerotic effects of 4 herbal formulas for Sasang constitutional medicine (Yeoldahanso-tang: YDHST, Yanggyeoksanhwa-tang: YGSHT, Cheongsimyeonja-tang: CSYJT and Taeeumjowi-tang: TEJWT). Methods : The antioxidant activities of herbal formulas were studied by measuring free radical scavenging activities on ABTS and DPPH. The inhibitory effects on LDL oxidation was evaluated by the formation of TBARS, REM and fragmentation of apolipoprotein B-100 (ApoB). Effects of herbal formulas on macrophage lipid accumulation were determined in native LDL and LPS co-incubated macrophages using Oil Red O staining. Results : The scavenging activities on ABTS and DPPH of herbal formulas were increased in dose-dependent manner (YDHST>YGSHT>CSYJT>TEJWT). Herbal formulas reduced the oxidation properties of LDL induced by $CuSO_4$. YDHST, YGSHT and CSYJT showed strong suppressive effect on LDL oxidation than TEJWT. In addition, YDHST, YGSHT and CSYJT significantly inhibited foam cell formation in LDL/LPS stimulated RAW 264.7 cells. Conclusions : These results demonstrate that YDHST, YGSHT and CSYJT have potentials on anti-atherosclerosis by antioxidative effect and suppressive effect on LDL oxidation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.12
• /
• pp.1320-1325
• /
• 2004

In this study, in order to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, PCW-PMN-PZT ceramics added with Li$_2$CO$_3$, Bi$_2$O$_3$ and CuO as sintering aids were manufactured, and their microstructural, dielectric and piezoelectric properties were investigated. When the only CuO was added, specimens could not be sintered below 98$0^{\circ}C$. However, when Li$_2$CO$_3$ and Bi$_2$O$_3$ were added, specimens could be sintered below 98$0^{\circ}C$. Li$_2$CO$_3$ and Bi$_2$O$_3$ addition were proved to lower sintering temperature of piezoelectric ceramics due to the effect of Li$_2$O-Bi$_2$O$_3$ liquid phase. Li$_2$CO$_3$ and Bi$_2$O$_3$ added specimens showed higher piezoelectric properties than those of the only CuO added specimens. At 0.2 wt% Li$_2$CO$_3$ and 0.3 wt% Bi$_2$O$_3$ added specimen sintered at 92$0^{\circ}C$, the dielectric constant of 1457, electromechanical coupling factor of 0.56 and mechanical quality factor of 1000 were shown, respectively. These values are suitable for multilayer piezoelectric transformer application.

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.62-66
• /
• 2000

Annealing cycle number and nonmagnetic layer thickness dependences of interlayer coupling field ( $H_{inf}$ ) and coercivity ( $H_{cf}$ ) of free magnetic layer on NiMn alloy-spin valve films (SVF) were investigated. The SVF is Glass (7059)/N $i_{81}$F $e_{l9}$(70 $\AA$)/Co(10 $\AA$)/Cu(t $\AA$)/Co(15 $\AA$)N $i_{81}$$Fe_{19}$(35 $\AA$)/N $i_{25}$M $n_{75}$(250 $\AA$)Ta(50 $\AA$) films, it were fabricated using the dc sputtering method at different pinning layer thickness and nonmagnetic spacer thickness (Cu thickness; 30 $\AA$, 35 $\AA$, 40 $\AA$) of NiMn alloy with 25 at.%. Ni In case that Cu thickness of SVF is 35 $\AA$ and peak exchange coupling field ( $H_{ex}$) was 620 Oe, while coercivity $H_{c}$ = 280 Oe and MR ratio showed 2.5%. As for $H_{inf}$ and $H_{cf}$ , every SVF increased up to the stabilized values with the increase of annealing cycle number 15, which were $H_{inf}$ of 120 Oe and $H_{cf}$ of 75 Oe. The increase of $H_{cf}$ with the annealing cycle number seems to be caused by the effective reduction of Cu layer thickness due to the increase of interfacial mixing of Cu layer and Co layer. In addition, the $H_{inf}$ and $H_{cf}$ dependences of free NiFe layer by the interfacial mixing effect were appeared the different aspects when Cu layer becomes more thinner and thicker than Cu layer thickness of 35 $\AA$, respectively.ively....

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.347.1-347.1
• /
• 2016

Screen printing is commonly used to form the electrode for crystalline silicon solar cells. However, it has caused high resistance and low aspect ratio, resulting in decrease of conversion efficiency. Accordingly, Ni/Cu/Ag plating method could be applied for crystalline silicon solar cells to reduce contact resistance. For Ni/Cu/Ag plating, laser ablation process is required to remove anti-reflection layers prior to the plating process, but laser ablation results in surface damage and then decrease of open-circuit voltage and cell efficiency. Another issue with plating process is ghost plating. Ghost plating occurred in the non-metallized region, resulting from pin-hole in anti-reflection layer. In this paper, we investigated the effect of Ni/Cu/Ag plating on the electrical properties, compared to screen printing method. In addition, phosphoric acid layer was spin-coated prior to laser ablation to minimize emitter damage by the laser. Phosphorous elements in phosphoric acid generated selective emitter throughout emitter layer during laser process. Then, KOH treatment was applied to remove surface damage by laser. At this step, amorphous silicon formed by laser ablation was recrystallized during firing process and remaining of amorphous silicon was removed by KOH treatment. As a result, electrical properties as Jsc, FF and efficiency were improved, but Voc was lower than screen printed solar cells because Voc was decreased due to surface damage by laser process. Accordingly, we expect that efficiency of solar cells could be improved by optimization of the process to remove surface damage.

• The Korean Journal of Mycology
• /
• v.21 no.1
• /
• pp.23-27
• /
• 1993

Ion effects on $11{\alpha}-hydroxylation$ of progesterone and $5{\alpha}-reduction\;of\;11{\alpha}-hydroxyprogesterone$ by Rhizopus nigricans were investigated. Metal ions such as $Cu^{2+},\;Cd^{2+},\;Co^{2+},\;Mn^{2+},\;Zn^{2+},\;Fe^{2+},\;Mg^{2+},\;Fe^{3+}\;and\;Na^+$ reduced the $11{\alpha}-hydroxylation$ activity, while $K^+$ stimulated the same reaction. Enzyme activity for the $5{\alpha}-reduction$ of $11{\alpha}-hydroxyprogesterone$ was increased in the presence of $Fe^{2+},\;Mn^{2+},\;Mg^{2+},\;Co^{2+},\;Zn^{2+},\;Fe^{3+},\;K^+\;and\;Na^+$, whereas it was decreased in the presence of $Cd^{2+}\;and\;Cu^{2+}$. Potassium ion of $10^{-3}\;M\;$ of concentration was found to be effective for the promotion of $11{\alpha}-hydroxylation$. On the other hand, cadmium ion of $10^{-4}\;M$ was proved to suppress the $5{\alpha}-reduction$ reaction. Progesterone is reported to be transformed into $11{\alpha}-hydroxyprogesterone$ which, in turn, is converted further into $11{\alpha}-hydroxy-allopregnane-3$, 20-dione by R. nigricans. From this point of view, the highest yield of $11{\alpha}-hydroxyprogesterone$ could be obtained when potassium ion of $10^{-3}\;M$ was given initially followed by addition of cadmium ion of $10^{-4}\;M$ to limit conversion of 11{\alpha}-hydroxyprogesterone into $11{\alpha}-hydroxy-allopregnane-\;3$, 20-dione.

• Journal of Food Hygiene and Safety
• /
• v.27 no.2
• /
• pp.133-140
• /
• 2012

Movement and accumulation of cadmium in male Sprague-Dawley rats, fed with brown rice from nearby Janghang smeltery area were investigated. The rat fed with five different cadmium level diets made with Cd-polluted during 12 weeks. The brown rice-polluted with 0.87 ppm Cd (PBR) was sampled from products in the Janghang smeltery area. Diets of brown rice group were brown rice (BR, 0.002 ppm Cd), each 50% of BR and PBR (BR+PBR 50%, 0.44 ppm Cd) and PBR (PBR 100%, 0.87 ppm Cd). To compare with BR+PBR 50%, the another group diet composed the feed (FE, 0.002 Cd ppm) and each 50% of FE and PBR (FE+PBR 50%, 0.44 ppm Cd). Accumulation of Cd, Zn and Cu in blood, liver and kidney rats was measured by GF-AAS. The weight gain in BR groups and FE groups were different 0.22-0.26 and 1.08-1.26 g/day, respectively. Daily intake cadmium was 10.77 and 22.36 ${\mu}g/rat$ in BR+PBR 50% and PBR 100%, and 8.83 ${\mu}g/rat$ in FE+PBR 50%. Cadmium contents in diets were higher, and total intake of the heavy metals was more increased on the whole. Weights of liver and kidney in FE+PBR 50% group was 2.64 and 2.27 folds higher than those in BR+PBR 50% group. Cadmium contents in blood were increased with intake of BR diet, but Zn and Cu were decreased with them. In the diet groups with the same Cd concentration, Cd content of FE+PBR 50% was higher 1.27 times than that of BR+PBR 50%. In the diet group of BR, BR+PBR 50%, and PBR 100%, the increase of Cd concentration was significantly different to the increase of Cd content in the livers. In the same condition of Cd concentration, Cd contents were higher in the BR+PBR 50% group. In the diet groups of BR, BR+PBR 50%, and PBR 100%, the increase of Cd content in the kidneys led to the increase of Zn and Cu contents. In the same condition of Cd concentration, the diet group with the addition of BR was shown to be 3.11 times higher than with the addition of FE. In view of the results so far achieved, It was closely related with Cd, Zn, and Cu content.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.3
• /
• pp.631-638
• /
• 2009

GLEDITSIAE SPINA (GS) has been used as folk remedies traditionally for treatment of antiphlogistic and antifebrile agents. An ethanol extract and its fraction of GS were assessed to determine the mechanism of its antioxidant activity. Also, inhibitory effect of extract from GS and its fraction measuring the inhibitory effect on $Cu^{2+}$-induced human low-density lipoprotein (LDL) oxidation. GS ethanol extract and its fraction exhibited a concentration-dependent reactive oxygen species (ROS) and reactive nitrogen species (RNS) scavenging activities, including trolox equivalent antioxidant capacity (TEAC), OPPH radical, superoxide anion, hydroxyl radicals, peroxynitrite and nitric oxide, using different assay systems. Furthermore, the GS ethanol extract and its fraction showed dose-dependent protection of LDL oxidation induced by $CuSO_4$. In addition, the GS ethanol extract and its fraction were characterized as containing a high amount of total phenolics. These results suggest that GS ethanol extract and its fraction might be helpful for preventing oxidative stress and protecting LDL oxidation.