• Journal of Korea Foundry Society
• /
• v.11 no.4
• /
• pp.314-322
• /
• 1991

In this study, Na, Li, Sb, Sr were added as the modifiers to improve the mechanical proper ties of Al-Si alloys and their effects were compared one another Thermal analysis was carried out to measure the degree of undercooling, that is, the basic mechanism of modifying effect. The measurements of holding time and analyses of components of Al-Si alloys were carried out to compare the fading of the modifiers. Greater degree of undercooling was measured from the modified alloy than the normal alloys. In the modified alloy, the shape of Si was changed into a fine fiber phase or a lamellar phase from the coarse plate phase. There are not modifying effect of Sb below the $1.5^{\circ}C$ /sec of cooling rate. As the cooling rate increases, similar effects appears in the non-modified alloys like the modified alloys. Na and Li were faded in short time and were difficult to control on the melt, but Sb and Sr were scarcely faded for 6 hours of holding and were easy to control on the melt. Na and Sr are the good modifiers in terms of microstructure. Sb is the best modifier, but Na, Li are the inadequate modifiers in terms of fading.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.589-595
• /
• 2003

Unsaturated polyester (UP) nanocomposite with montmorillonite (MMT) which contains different types of organic modifiers far nano-filler have been prepared to investigate the effect of chemical structure of organic modifiers and mixing time of all components on properties of products. It was found that the morphology and various physical properties of UP/MMT nanocomposites were influenced by properties of organic modifiers of MMTs. It was also confirmed that the content of MMT does not significantly affect properties of UP/MMT nanocomposites.

• Elastomers and Composites
• /
• v.57 no.4
• /
• pp.215-221
• /
• 2022

In this study, high-penetration asphalt with low greenhouse gas emissions was used in the asphalt mixing process to reduce the carbon emissions during the reaction due to its capacity to be produced even at low temperatures. In effect, cationic, anionic, and non-ionic dispersants were added and mixed in different feeding ratios, seeking an effective dispersion of the modifiers (SIS, PS, TPEE, and SEBS) into the high-penetration asphalt matrix and forming an asphalt binder with a melting point of 120 ℃. The compatibility of the modifiers and the high-penetration asphalt was examined using SEM and DSC techniques, and the role of NDP-1 as a dispersant was carefully investigated with respect to dissolution time. The analyses showed that: (1) the dispersibility of the asphalt binder is good when the non-ionic dispersant is used; (2) as the concentration of the non-ionic dispersant increases, the dissolution time decreases and the domain size contracts; (3) the ND70-PS has the shortest dissolution time, the lowest agglomeration rate, and a single Tg value.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.21-24
• /
• 2003

In general, to enhance physical properties of PET-layered silicate nanocomposites $(P_{et}LSNs)$, it has been well known that the organic modifiers should introduce into gallery regions. However, the organic modifiers in$(P_{et}LSNs)$ may result in thermal decomposition by melt processing at high temperature, and it necessarily lead to deteriorate various physical properties of final products. Therefore, in this study, $(P_{et}LSNs)$ excluding and including organic modifiers were prepared by solution method $(S-P_{et}LSNs_{eom} and S-P_{et}LSNs_{iom})$ and we (focused on the effects of the organic modifiers in $P_{et}$ LSNs with exfoliation structure on the crystallization behaviors, the optical transparency, the thermal stability and the mechanical property. The absence and existence of organic modifiers in $S-P_{et}LSNs_{eom} and S-P_{et}LSNs_{iom}$ were investigated by EA and TGA, and nano-structure of silicate layers in $S-P_{et}LSNs$ was evaluated by using WXRD, SAXS and TEM. $S-P_{et}LSNs_{eom} and S-P_{et}LSNs_{iom}$ were mixed with neat PET as masterbatches by melt method $(M-P_{et}LSNs_{eom} and M-P_{et}LSNs_{iom})$, and also neat PET was mixed with organically modified layered silicates (OLS) by conventional direct melt method $(D-P_{et}LSNs) at 270^{\circ}C$. As results, it was found that $M-P_{et}LSNs_{eom}, M-P_{et}LSNs_{iom}, and D-P_{et}LSN$ showed a exfoliated structure and exhibited faster crystallization rate, better thermal stability and mechanical property than those of neat PET due to the dispersed and detaminated silicate layers in PET matrix. Whereas, considering organic modifiers effect, $M-P_{et}LSNs_{eom} and D-P_{et}LSN$ exhibited slower crystallization rate, poorer optical, thermal and mechanical properties, in comparison to $M-P_{et}LSNs_{eom}> due to the thermal decomposition of organic modifier in $D-P_{et}LSNs$ during melt method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.4
• /
• pp.337-341
• /
• 1990

An investigation was conducted to determine whether the rumen modifiers lasalocid and avoparcin, when included in molasses/urea based supplements, enhanced liveweight performance, in early weaned calves. As part of the study the broad-spectrum parasiticle Avermectin B1 was given to the calves to assess any undesirable side effects on animals of less than four months of age. There were no significant (p>0.05) liveweight responses to supplementation when the rumen modifiers lasalocid and avoparcin were included in supplement rations. Lasalocid reduced supplement intake, however, it had no adverse effect on liveweight gain. Avoparcin substantially improved growth when cottonseed meal was included in the ration. Weaners treated with Avermectin B1 tended to show a greater liveweight gain than untreated weaners during the experiment (p<0.10) and no adverse side effects were noted.

• Journal of Sensor Science and Technology
• /
• v.16 no.1
• /
• pp.77-83
• /
• 2007

Nanoporous silica aerogels with various surface modifiers were prepared by ambient drying process. Tetraethylorthosilicate (TEOS) were used a raw material. Ambient drying process for various surface modifier was studied in the point of view of a crack-free monolith and thin films and low cost. Various kinds of surface modifiers like as hexamethyldisilazane (HMDSZ), trimethlychlorosilane (TMCS), methlytriethoxylsilane (MTES), and methlytrimethoxysilane (MTMS) were studied in order to enhance hydrophobicity for the silica aerogel. Surface modified aerogels were evaluated by FT-IR, TG, BET, SEM and wetting angle measurement. Homogeneous and crack-free aerogels were obtained by modifying the HMDSZ and the TMCS. However silica xerogel was obtained when modified with MTMS, MTES.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.121-126
• /
• 1994

To elucidate the effect on the reactive extraction of acetic acid, various carriers and modifiers were investigated. Carriers used were secondary and tertiary amines and solvation extractant. Diluent was n-butylacetate. Modifiers were 4-nonylphenol, TBP(Tti-n-butyl phospate) and isodecanol. Besides the effect of temperature and pH in aqueous phase were studied. The mixture of 50% tri-n-octyl/n-decylamine tertiary amine, gave higher degree of extraction and selectivity than other extractants in the extraction of acetic acid. It was found that 4-nonylphenol as modifier fairly good. The degree of extraction was higher with decreasing the pH in aquous phase and the temperature of extraction system.

• Korean Management Science Review
• /
• v.32 no.3
• /
• pp.105-118
• /
• 2015

This study examines the relationship between city slogan modifiers and slogan attitudes from the perspective of residents in other cities. To examine this relationship, the study focuses on two important characteristics of slogan modifiers : the preference for a slogan modifier and the fit of a slogan modifier. To test the hypotheses, a 2 (low vs. high city knowledge)${\times}2$ (low vs. high slogan modifier preference)${\times}2$ (low vs. high slogan modifier fit) between-subjects factorial design was adopted. A total of 254 undergraduate students at the authors' college participated in the study. Their ages ranged from 19 and 30 (average = 22.3), and 58.3% of the participants were male. According to the results, the high-preference slogan modifier had a greater positive effect on slogan attitudes than the low-preference one. Similarly, the high-fit slogan modifier had a greater positive effect on slogan attitudes than the low-fit one. Also, it was shown that the fit of the slogan modifier had a greater effect on purchase intentions than the preference for the slogan modifier when city knowledge was high. However, contrary to expectations, when city knowledge was low, the standardized coefficient of the preference for the slogan modifier was not significantly different from that of its fit.

• Computers and Concrete
• /
• v.20 no.2
• /
• pp.165-176
• /
• 2017

Textile Reinforced Cementitious Composite (TRCC) became the most common construction material lately and have excellent properties. TRCC can be employed in the manufacture of thin-walled facade elements, load-bearing integrated formwork, tunnel linings or in the strengthening of existing structures. These composite materials are a combination of matrix and textile materials. There isn't much research done about the usage of polymer modified matrices in textile reinforced cementitious composites. In this study, matrix materials named as fine grained concretes ($d_{max}{\leq}1.0mm$) were investigated. Air entraining effect of polymer modifiers were analyzed and air void content of fine grained concretes were identified with different methods. Aim of this research is to study the effect of polymer modification on the air content of fine grained concretes and the role of defoamer in controlling it. Polymer modifiers caused excessive air entrainment in all mixtures and defoamer material successfully lowered down the air content in all mixtures. Latex polymer modified mixtures had higher air content than redispersible powder modified ones. Air void analysis test was performed on selected mixtures. Air void parameters were compared with the values taken from air content meter. Close results were obtained with tests and air void analysis test found to be useful and applicable to fine grained concretes. Air void content in polymer modified matrix material used in TRCC found significant because of affecting mechanical and permeability parameters directly.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.1
• /
• pp.86-95
• /
• 2000

Animal feed additives are used worldwide for many different reasons. Some help to cover the needs of essential nutrients and others to increase growth performance, feed intake and therefore optimize feed utilization. They can positively effect technological properties and product quality. The health status of animals with a high growth performance is a predominant argument in the choice of feed additives. In many countries the use of feed additives is more and more questioned by the consumers: substances such as antibiotics and $\beta$-agonists with expected high risks are banned in animal diets. Therefore, the feed industry is highly interested in valuable alternatives which could be accepted by the consumers. Probiotics, prebiotics, enzymes and highly available minerals as well as herbs can be seen as alternatives to metabolic modifiers and antibiotics.