• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.441-442
• /
• 2008

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.73-76
• /
• 2009

The optical structure of edge-lit LED backlight has been optimized via simulation study in order to remove bright spots appearing on the entrance region of the light guide plate (LGP) and thus to improve the luminance uniformity. The density of scattering dots located on the back surface of LGP was adjusted according to the location of LED's. In addition, lenticular lenses or a diffuse transmissive surface were formed on the side surface of LGP facing the LED's, and the density of lenticular lenses was optimized for redistributing rays emitted from LED's into wider angles. The bright spots which could be seen from conventional LED backlight were removed by the combination of these two optical structures. The application of diffuse surface to the entrance face gave better uniformity than the application of lenticular lenses. However, dark regions still appear on the entrance region of LGP, which should be removed by more appropriate optical design for achieving better luminance uniformity on the LED backlight.

• Journal of Information Display
• /
• v.12 no.1
• /
• pp.23-27
• /
• 2011

The correlation between the temporal and spatial variations of the elastic constant and temperature change was examined for a light guide plate (LGP) adopted in the edge-lit light-emitting-diode backlight for mobile applications, using the micro- Brillouin light scattering method. The velocity of sound and the elastic constant $C_{11}$ of an LGP made from bisphenol-A polycarbonate (PC) were investigated as functions of temperature, time, and position on the LGP. The temporal variation of $C_{11}$ exhibited an exponential decay, while the spatial variation of $C_{11}$ reflected the temperature distribution on the LGP. The glass transition temperature of the PC LGP was found to be located at $155^{\circ}C$. The result showed that systematic transformation between the elastic property and the temperature is possible and that the temperature distribution on the bulk LGP can be accurately probed via the present experiment method, without using any special temperature measurement equipment.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.61-68
• /
• 2010

Optical simulation methods were applied to the edge-lit LED backlight for LCD TV applications in order to optimize the optical structure of the light guide plate(LGP), and thus to improve the uniformity properties by removing the bright spots caused by LED's. The edge-lit LED backlight consisted of three white LED's with a lamp cover, a light guide plate, and a reflection film. When there was no pattern on the entrance side surface of the LGP, the illuminance uniformity was sensitively dependent on the distance d between the LED and the entrance surface. The illuminance uniformity increased with d but its increasing rate slowed down when d was beyond ~ 1.5 mm. When micro-patterns such as a lenticular lens array (LLA) or a serration pattern were formed on the entrance surface, the illuminance uniformity was improved substantially even for the case of very small d. At the same simulation condition, the lightguide with serration pattern showed a better uniformity than that with LLA pattern. Additional improvement could be achieved by changing the refractive index of the micro-patterns. These results suggest that using micro-patterns is a very effective way to reduce the bright spots due to their refracting function for the concentrated incident rays onto the LGP.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.387-388
• /
• 2008

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.486-488
• /
• 2015

FSC(Field Sequential Color) LCD has high efficiency, high brightness and color saturation due to 3 times aperture larger than conventional LCD. However it is well known that color break-up (CBU) and color interference are hot issue need to be solved. We propose a novel sequential driving method with edge-lit light guide composed of $16{\times}15$ blocks to reduce CBU and color interference. The experimental results show not only suppression of CBU but also the side effects are minimized.

• Journal of Information Display
• /
• v.5 no.1
• /
• pp.7-15
• /
• 2004

A highly simplified backlight unit mainly composed of diffractive grating in sub-micron order imprinted light-guide plate (LGP) is proposed for edge-lit backlight unit. Optical characteristics of the imprinted LGP are examined by RCWA and the performance is verified through Monte Carlo simulation. Results show that the diffraction efficiency, luminous flux and its uniformity over the area are significantly affected by the angle of incident ray. Consequently couples of design considerations are additionally proposed to enhance luminous flux. In terms of peak luminance and out-coupling luminous flux, the experimental results are agreed well with the performance simulation. Finally, compared with optical characteristics of conventional backlight unit, we could conclude that the proposed simplified backlight unit made of diffractive grating imprinted light-guide plate is a good substitute for the conventional backlight unit.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1495-1498
• /
• 2002

The constrained average method is one of dither methods which combines edge emphasis and grayscale rendition to provide legibility of textual region and proper quality of continuous tone region. How-ever, image quality of continuous tone region is insufficient compared to other dither methods, such as ordered dither methods or the error diffusion method. The constrained average method uses a uniform distribution function to decide number of lit pixels related to the average intensity in a picture area. However, actual distribution of continuous tone region is closer to the Laplacian distribution or triangle distribution. In this paper, we introduce various probability distributions and the actual luminance distribution to decide the threshold value of the constrained average method in order to improve image quality of dithered image.

• Journal of Information Display
• /
• v.12 no.4
• /
• pp.167-171
• /
• 2011

The angular distribution of the luminance on each optical component of 40-inch light-emitting diode backlight was measured and studied, using the optical-simulation method. Several scattering functions were investigated as the reflection distribution function of the scattering dots printed on the bottom surface of the light guide plate (LGP). It was found that both the diffuse Lambertian and near-specular Gaussian scattering functions were necessary for the successful reproduction of the experimental angular distribution of the luminance. The optimization of the scattering parameters included in these scattering functions led to almost the same luminance distribution as that obtained from the experiment. This approach may be an effective way of indirectly estimating the reflection distribution function of the scattering dots of the LGP, which cannot be made accessible through any other experimental method.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.151-156
• /
• 2012

Reflective polarizers can be used as luminance enhancement films for LCD backlights via the polarization recycling process. The optical performances of a wire grid polarizer (WGP) as a reflective polarizer adopted in edge-lit backlights were investigated by luminance evaluation and a time-domain simulation technique. The results were compared to those of a commercial dielectric multilayer film. The luminance gain factor of WGP was smaller than that of the multilayer film by 18%. This was attributed to a much larger internal loss of WGP due to light absorption by metal wires. The internal losses of both reflective polarizers and the polarization conversion efficiency of the backlight were obtained numerically based on a phenomenological model. The optical performances of WGP were optimized by using a time-domain simulation technique. The luminance gain increased and was found to become comparable to, but slightly less than the case of the dielectric multilayer film with decreasing line width.