• 대한원격탐사학회지
• /
• 제22권6호
• /
• pp.601-612
• /
• 2006

본 연구는 방대한 크기 원격 탐사 영상 자료의 효율적인 분석을 위한 RAG (Region Adjancency Graph) 기반 영상 분할 기법을 제안하고 있다. 제안된 알고리즘은 계산의 효율성을 위하여 CN-chain 연결과 저장 기억의 효율성을 위하여 sliding 다중 창을 사용한다. RAG에 의한 지역 합병은 최선의 결합을 위한 edge을 발견과 합병에 따른 graph의 갱신의 과정이다. CN-chain 연결법은 가장 유사한 인접 지역의 연결을 형성하면서 최선의 edge를 발견하여 합병을 해 나가는 과정으로 영상 자료 크기의 증가에 따라 단지 증가 배수만큼만 분석 시간을 증가시킨다. 합병에 의해 변하는 RAG의 효율적인 갱신을 위하여 RNV(Regional Neighbor Vector)를 사용하였다. 방대한 크기 자료 분석은 막대한 기억 용량의 시스템을 필요로 한다. 제안된 수평적인 구조의 sliding 다중 창 작업은 필요한 기억 용량을 현저히 감소시켜 가능한 분석 자료의 크기를 증대시켰을 뿐 아니라 계산 시간의 감소를 초래하였다. 본 연구는 simulation 자료를 사용하여 광범위하게 제안된 알고리즘의 성능을 실험하였으며 실험 결과는 알고리즘의 효율성을 입증하였다.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.18-24
• /
• 1999

ThisPaper investigates the feasibility of using acoustic emission signal analysis for the detection of built-up edge during machining. Experiments were conducted on a CNC-lathe using conventional carbide insert tools under various cutting conditions. The cutting forces were also measured for comparisons. Experimental evidence is presented which indicates that the presence of a built-up edge can significantly affect the generation of acoustic emission in metal cutting. It is shown that under conditions in which a built-up edge is generated, the variation of $AE_{rms}$ signal with cutting speed can be quite different from the generally accepted linear, monotonic increase as previously reported. The feasibility of utilizing $AE_{rms}$ in built-up edge sensing is suggested.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.676-678
• /
• 2021

본 논문은 해상 및 산업용 IoT 서비스를 위한 에지 기기의 설계에 대해 설명한다. 에지 기기는 IoT 센싱 데이터를 수집하여 외부 망을 전달하는 역할만을 수행하도록 설계되었고, 통신 방식은 사용 LoRa와 LTE Cat.M1을 적용하였다.

• 센서학회지
• /
• 제15권2호
• /
• pp.112-119
• /
• 2006

Resolution of an image sensor is very significant parameter to improve. It is hard to improve the resolution of the CMOS vision chip for edge detection based on a biological retina using a resistive network because the vision chip contains additional circuits such as a resistive network and some processing circuits comparing with general image sensors such as CMOS image sensor (CIS). In this paper, we proved the problem of low resolution by separating photo-sensing and signal processing circuits. This type of vision chips occurs a problem of low operation speed because the signal processing circuits should be commonly used in a row of the photo-sensors. The low speed problem of operation was proved by using a reset decoder. A vision chip for edge detection with $128{\times}128$ pixel array has been designed and fabricated by using $0.35{\mu}m$ 2-poly 4-metal CMOS technology. The fabricated chip was integrated with optical lens as a camera system and investigated with real image. By using this chip, we could achieved sufficient edge images for real application.

• 대한원격탐사학회지
• /
• 제27권5호
• /
• pp.573-586
• /
• 2011

MTF(modulation transfer function)는 광학 시스템의 성능을 평가하기 위하여 사용되는 중요한 파라미터 중 하나이다. 또한 열악한 우주 환경(방사능, 극한 열조건 및 전자기장 등), 대기 영향 및 시스템 성능의 저하 등으로 저하된 영상품질을 복원시켜주기 위한 파라미터로 사용될 수도 있다. 본 논문에서는 소형 지구관측위성인 DubaiSat-1이 발사된 후, 위성영상의 품질을 평가하기 위하여 MTF를 측정하였다. 일반적으로 MTF는 point source 혹은 knife-edge 방법 등과 같은 다양한 방법을 이용하여 측정되어왔다. 그러나 본 논문에서는 ISO에서 line source에 의한 MTF 측정을 표준화한 slanted-edge 방법을 이용하여 MTF를 측정하였다. Slanted-edge 방법은 전자 스틸 카메라(electronic still-picture camera)의 MTF를 측정하기 위한 ISO 12233 표준으로써, 라인스캐닝 망원경(line-scanning telescope)의 MTF를 추정하기 위하여 사용된 방법이다. 또한 PSF(point spread function) 기반으로 제작된 MTF 회선 커널(MTF convolution kernel)에 의한 MTF 보상(MTF compensation)과 영상의 노이즈 제거(image denoising)를 수행하여 영상의 품질 저하(degradation)를 완화시켰다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.259-264
• /
• 1995

Recently, in order to achieve high flexibilty, monitoring and control strategies of a new type have been developed. This paper investigates the fesability of using scoustic emission signal analysis for the detection of built-up edge during machining. Results for maching SM45C steel show that the presence of a built-up edge can significantil affect the generation of acoustic emission in metal cutting. When the cutting speed comes to the conditions conducive to development of built-up edge, it is shown that the slope of curve-fitted AErms signal undergoes a change. The fesability of utilizing AErms in built-up edge sensing is sugested.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.159-161
• /
• 2003

Fitting the projected wire-frame model to the detected edge pixels on images by using least-squares approach, called Least-squares Model-image Fitting (LSMIF), is the key of the Model-based Building Extraction (MBBE). It is implemented by iteratively adjusting the model parameters to minimize the squares sum of distances from the extracted edge pixels to the projected wire-frame. This paper describes a series of experiments and studies on various factors affect the fitting results, including the edge detectors, the weighting rules, the initial value of parameters, and the number of overlapped images. The experimental result is not only helpful to clarify the influences of each factor, but is also able to enhance the robustness of the LSMIF algorithm.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.304-309
• /
• 1999

In this paper, we presents a new disparity map refinement algorithm using statistical characteristics of disparity map and edge information. The proposed algorithm generate a refined disparity map using disparity maps which are obtained from area and feature-based Stereo Matching by selecting a disparity value of edge point based on the statistics of both disparity maps. Experimental results on aerial stereo image show the better results than conventional fusion algorithms in the disparity error. This algorithm can be applied to the reconstruction of building image from the high resolution remote sensing data.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.415.1-415.1
• /
• 2014

Carrying out first-principles calculations, we study N-doped capped carbon nanotube (CNT) electrodes applied to DNA sequencing. While we obtain for the face-on nucleobase junction configurations a conventional conductance ordering where the largest signal results from guanine according to its high highest occupied molecular orbital (HOMO) level, we extract for the edge-on counterparts a distinct conductance ordering where the low-HOMO thymine provides the largest signal. The edge-on mode is shown to operate based on a novel molecular sensing mechanism that reflects the chemical connectivity between N-doped CNT caps that can act both as electron donors and electron acceptors and DNA functional groups that include the hyperconjugated thymine methyl group[1].

• 대한원격탐사학회지
• /
• 제11권1호
• /
• pp.47-64
• /
• 1995

In this paper, an algorithm that finds man-made structures in a praylevel aerial images is proposed to perform stereo matching. An extracted contour of buildings must have a high accuracy in order to get a good feature-based stereo matching result. Therefore this study focuses on the use of edge following in the original image rather than use of ordinary edge filters. The Algorithm is composed of two main categories; one is to find candidate regions in the whole image and the other is to extract exact contours of each building which each candidate region.. The region growing method using the centroid linkage method of variance value is used to find candidate regions of building and the contour line tracing algorithm based on an adge following method is used to extract exact contours. The result shows that the almost contours of building composed of line segments are extracted.