• Journal of Mechanical Science and Technology
• /
• v.19 no.11
• /
• pp.2032-2039
• /
• 2005

The lattice Boltzman method (LBM) and the finite difference-based lattice Boltzmann method (FDLBM) are quite recent approaches for simulating fluid flow, which have been proven as valid and efficient tools in a variety of complex flow problems. They are considered attractive alternatives to conventional finite-difference schemes because they recover the Navier-Stokes equations and are computationally more stable, and easily parallelizable. However, most models of the LBM or FDLBM are for incompressible fluids because of the simplicity of the structure of the model. Although some models for compressible thermal fluids have been introduced, these models are for monatomic gases, and suffer from the instability in calculations. A lattice BGK model based on a finite difference scheme with an internal degree of freedom is employed and it is shown that a diatomic gas such as air is successfully simulated. In this research we present a 2-dimensional edge tone to predict the frequency characteristics of discrete oscillations of a jet-edge feedback cycle by the FDLBM in which any specific heat ratio $\gamma$ can be chosen freely. The jet is chosen long enough in order to guarantee the parabolic velocity profile of a jet at the outlet, and the edge is of an angle of $\alpha$=23$^{o}$. At a stand-off distance w, the edge is inserted along the centerline of the jet, and a sinuous instability wave with real frequency is assumed to be created in the vicinity of the nozzle exit and to propagate towards the downstream. We have succeeded in capturing very small pressure fluctuations resulting from periodic oscillation of the jet around the edge.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.2
• /
• pp.105-110
• /
• 2004

The objective of this study is to obtain the instability characteristics of the plane jet impinging on circular cylinder associated with the cylinder-tone. It is found that the characteristics depends upon he ratio of the cylinder diameter to the nozzle width, D/h, and the jet velocity. When the ratio is oderate the cylinder-tone is similar to the edge-tone. With increase of the ratio, its characteristics ecomes similar to that of the plate-tone in which only the high-speed tone associated with turbulent et is generated. When D/h 〈1. the frequency range, especially the lower limit of frequency, is ignificantly influenced by the cylinder diameter. At around D/h = 1/2, while low speed tones are nduced with the antisymmetric mode of instability and affected by the vortex shedding from the ylinder, high-speed tones are generated, at first, with the symmetric mode of instability. and then, ith antisymmetric mode, as the jet velocity increases.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.65-73
• /
• 2003

An experimental study on flame lift-off characteristics of propane jet flame highly diluted with nitrogen has been conducted introducing acoustic forcing with a tube resonant frequency. A flame stability curve is attained according to forcing strength and nozzle exit velocity for $N_2$ diluted flames. Flame lift-off behavior with forcing strength and nozzle exit velocity is globally categorized into three; a well premixed behavior caused by a collapsible mixing for large forcing strength, a coexistent behavior of well-premixed and edge flames interacting with well-organized inner fuel vortices for moderate forcing strengths, and edge flame behavior for small forcing strengths. Special focus is concentrated on the coexistent behavior of the flame base in lifted flame since this may give a hint to a possibility which the flame base behaves like a well-mixed premixed flame in highly turbulent lifted flames. It is also shown that the acoustic forcing to self-pulsating laminar lifted flame affects flame lift-off behavior considerably which is closely related to downstream flow velocity, mixture strength, effective fuel Lewis number, and flame stretch.

• Phonetics and Speech Sciences
• /
• v.8 no.4
• /
• pp.31-38
• /
• 2016

The purpose of the current study was to examine the acquisition of the second language prosody by Korean learners of English. Specifically, this study investigated Korean learners' patterns of prosodic phrasing and their use of edge tones (i.e., phrase accents and boundary tones) in English, and then compared the patterns with those of native English speakers. Eight Korean learners and 8 native speakers of English read 5 different English passages. Both groups' patterns of tones and prosodic phrasing were analyzed using the Mainstream American English Tones and Break Indices (MAE_ToBI) transcription conventions. The results indicated that the Korean learners chunked their speech into prosodic phrases more frequently than the native speakers did. This frequent prosodic phrasing pattern was especially noticeable in sentence-internal prosodic phrases, often where there was no punctuation mark. Tonal analyses revealed that the Korean learners put significantly more High phrase accents (H-) on their sentence-internal intermediate phrase boundaries than the native speakers of English. In addition, compared with the native speakers, the Korean learners used significantly more High boundary tones (both H-H% and L-H%) for the sentence-internal intonational phrases, while they used similar proportion of High boundary tones for the sentence-final intonational phrases. Overall, the results suggested that Korean learners of English successfully acquired the meanings and functions of prosodic phrasing and edge tones in English as well as that they are able to efficiently use these prosodic features to convey their own discourse intention.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.5
• /
• pp.569-579
• /
• 2004

The lift-off characteristics of lifted laminar propane jet flames highly diluted with nitrogen are investigated introducing acoustic forcing with a fuel tube resonance frequency. A flame stability curve is obtained according to forcing strength and the nozzle exit velocity for N2 diluted flames. Flame lift-off behavior is globally classified into three regimes; 1) a weakly varying partially premixed behavior caused by a collapsible mixing for large forcing strength, 2) a coexistent behavior of the edge flame and a weakly varying partially premixed behavior for moderate forcing strength, and 3) edge flame or triple flame behavior for small forcing. It is shown that the laminar lifted flame with forcing affects flame lift-off behavior considerably, and is also clarified that the flame characteristic of flame base is well described with the penetration depth of the degree of mixing, ${\gamma}$$\_$$\delta$/. It is also confirmed that the weakly varying partially premixed flame caused by a collapsible mixing fur large forcing strength behaves as that just near flame blow-out in turbulent lift-off flame.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1495-1498
• /
• 2002

The constrained average method is one of dither methods which combines edge emphasis and grayscale rendition to provide legibility of textual region and proper quality of continuous tone region. How-ever, image quality of continuous tone region is insufficient compared to other dither methods, such as ordered dither methods or the error diffusion method. The constrained average method uses a uniform distribution function to decide number of lit pixels related to the average intensity in a picture area. However, actual distribution of continuous tone region is closer to the Laplacian distribution or triangle distribution. In this paper, we introduce various probability distributions and the actual luminance distribution to decide the threshold value of the constrained average method in order to improve image quality of dithered image.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.34-41
• /
• 1997

The objective of this study is to investigate experimentally the frequency characteristics of the hole tones generated by a circular jet of low speed impinging on a plate with a round hole. The experimental results about the sound spectrum and the time wave of the hole tone are presented and discussed in relation with the hole type, the jet velocity and the distance of the nozzle-to-plate with a round hole. From the sound spectrum and time wave measurements, it is found that the hole tone is generated not only by an interaction of convected vortices with a round hole but also by a series of vortex shedding from jets passing through a hole. The hole tones generated by a feedback mechanism consist of many frequency stages and also have a hysteresis phenomenon like an edge tone. But the hole tones generated by a series of vortex shedding have nothing with the stage characteristics. The frequencies of hole tones are influenced by the jet velocity, the distance of the nozzle-to-plate with a round hole and the hole type.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.267-268
• /
• 2007

A dynamic range compression algorithm using Markov random field (MRF) modeling to display high dynamic range (HDR) images on low dynamic range (LDR) devices is proposed in this work. The proposed algorithm separates foreground objects from the background using the edge information, and then compresses the color differences across the edges based on the MRF modeling. By minimizing a cost function using belief propagation, the proposed algorithm can provide an effective LDR image. Simulation results show that the proposed algorithm provides good results.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.2
• /
• pp.45-59
• /
• 1998

Halftonig is a technique to create the appearance of intermideate tone levels by controlling the spatial distribution of the binary pixel values. Recently, many printing devices such as image setter, inkjet printer, laser printer and facsimile, generate image, they require the technique. Ordered dither is achieved comparing the gray scale image to periodic array. This method is fast, but it occurs periodic patterns. Conentional error diffusion generates a good image. But processing speed is very slow and appeares worm artifacts in middle tone scale. To improve it, Bns(Blue noise Screen) is developed based on Gaussian distribution. In this paper, we discribe methods to design BNS based human visual characteristics and to improve blue appearing at edge area of image by USM(using unsharp mask).

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.1
• /
• pp.50-55
• /
• 2004

In this study, slit-tones by plane impinging jet are investigated experimentally over the whole subsonic flow range, especially at low speeds, in order to obtain the instability behaviour of impinging plane jet. Slit-tones are generated at low speeds associated with laminar shear layer instability as well as at high speeds associated with turbulent instability. Most of low-speed slit-tones are induced by symmetric mode instability unless the slit is not so wide, in which case antisymmetric modes are induced like edge-tones. It is found that the frequencies at low speeds ate controled by the unstable condition of the vortex at the nozzle exit and its pairings by which the frequencies are decreased by half. In the case of symmetric modes related with low-speed slit-tones, frequencies lower than those associated with one-step pairings are not found.