• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2021년도 하계학술대회
• /
• pp.204-207
• /
• 2021

LiDAR 장비 및 SfM 과 MVS 방법을 이용하여 생성된 point cloud 와 mesh 에는 항상 노이즈가 포함되어 있다. 이러한 노이즈를 제거하기 위해선 노이즈와 edge 를 효과적으로 구분해낼 수 있어야 한다. 노이즈를 제거하기 위해 mesh 로부터 edge 를 먼저 구분해낸 후 edge 에 해당하는 영역과 평면에 해당하는 영역에 서로 다른 필터를 사용하는 많은 연구들이 있지만 강한 노이즈가 포함된 mesh 에서는 edge를 잘 구분해내지 못하는 문제가 존재한다. 이러한 방법들은 mesh 로부터 edge 를 구분해내는 알고리즘의 성능이 노이즈를 제거하는 전체 알고리즘의 성능에 큰 영향을 주기 때문에 강한 노이즈에서도 edge 를 잘 구분해낼 수 있는 알고리즘이 필요하다. 본 논문에서는 PCA 와 graph-cut 을 이용하여 강한 노이즈가 포함된 mesh 에서 edge 영역을 추출하는 알고리즘을 제안한다.

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1105-1113
• /
• 2003

In the gas wiping process of continuous hot-dip galvanizing, edge overcoating develops near the edge of the steel strip. The overcoating is supposed to occur due to the reduced impact pressure of wiping gas on the strip surface. The purpose of this study is to investigate the effect of edge vortex on the reduced impact pressure. Three-dimensional unsteady flows are simulated using a commercial code, STAR-CD. Standard k-$\varepsilon$ model is used as a turbulence model. It is found that an alternating vortex structure in the vicinity of strip edge is developed by buckling of opposed jet streams and that the reduced amount of impact pressure at strip edge becomes smaller as the air knife gets closer to the strip. The effect of edge baffle on the reduced impact pressure is also investigated.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.723-730
• /
• 1998

With the introduction of edge drop control system in Tandem Cold Rolling Mill, it is necessary to develop te numerical expression for the set-up and edge drop automatic control of cold rolled sheet. As a first step we developed a simulation program which predicts profile and the amounts of edge drop at the delivery side of each stand by using roll deformation anlysis with the slit roll model. And by using the program the effect of various rolling conditions on edge drop was investigated. As a result the relations were obtained between the amounts of edge drop and rolling conditions. Based on above relations, the numerical expression was developed for the set-up and automatic control of edge drop by multi-regression of simulation results for the variation of edge drop amount with each rolling condition.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권11호
• /
• pp.2068-2086
• /
• 2011

Based on the quincunx sub-sampling grid, the New Interleaved Hierarchical INTerpolation (NIHINT) method is recognized as a superior pyramid data structure for the lossless and progressive coding of natural images. In this paper, we propose a new image interpolation algorithm, Edge Adaptive Hierarchical INTerpolation (EAHINT), for a further reduction in the entropy of interpolation errors. We compute the local variance of the causal context to model the strength of a local edge around a target pixel and then apply three statistical decision rules to classify the local edge into a strong edge, a weak edge, or a medium edge. According to these local edge types, we apply an interpolation method to the target pixel using a one-directional interpolator for a strong edge, a multi-directional adaptive weighting interpolator for a medium edge, or a non-directional static weighting linear interpolator for a weak edge. Experimental results show that the proposed algorithm achieves a better compression bit rate than the NIHINT method for lossless image coding. It is shown that the compression bit rate is much better for images that are rich in directional edges and textures. Our algorithm also shows better rate-distortion performance and visual quality for progressive image transmission.

• 한국멀티미디어학회논문지
• /
• 제19권6호
• /
• pp.990-1002
• /
• 2016

In this paper, we propose a new compression method for the edge image by analyzing the characteristics and the distribution of pixel values of the edge image. The pixel values of the edge image have the Gaussian distribution around '0', and most of the pixel values are `0`. By these analyses we suggest the Zero-Based codec that expresses all values in a CU by a single bit flag. Also, in order to reduce the computational complexity of the proposed codec, the block partition and the intra-prediction techniques are proposed by using edge information like the number of each edge direction, the distribution and the amplitude of a major edge direction in the CU. Experimental results show that the proposed codec leads to a slighter distortion in Y domain than that of HEVC, but has far faster processing speed up to 53 times while it maintains the similar image quality compared to HEVC.

• 한국컴퓨터정보학회논문지
• /
• 제3권2호
• /
• pp.85-97
• /
• 1998

기존의 윤곽선 추출 방법은 중첩된 두꺼운 선으로 추출되어 물체의 실제 경계선을정확하게 표시하지를 못하거나 윤곽선에 끊어짐이 많아 연결성이 떨어지는 문제점을 지니고있었다. 본 논문은 이러한 문제점을 해결하기 위하여 윤곽선 추출에 유전자 알고리즘을 적용하였으며 에너지 함수는 픽셀의 윤곽선 만족도를 수치로 산정해 주는 식으로 함수로 화상구조 형에 대한 평가 에너지와 이웃 윤곽선과의 연속성에 대한 평가 에너지, 윤곽선이 정확한 위치에 1 픽셀로 나타냈는지에 대한 평가함수로 구성하였다. 제안된 방법은 기존의 방법에 비해 잡음제거에 우수하였고 또한 연결성이 강하고 최적의 위치에 놓인 픽셀을 찾음으로서 보다 선명하고 정확한 윤곽선 추출을 가능케 하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.7-12
• /
• 2006

The propagation rates ($U_{edge}$) of various premixed edge-flames were measured as a function of global strain rate (${ \sigma}$), mixture strength, and Lewis number (Le). Using a counterflow slot-jet burner with electrical heaters at each end, both advancing (positive $U_{edge}$) and retreating (negative $U_{edge}$) edges can be studied as they propagate along the long dimension of the burner. Preliminary results are presented for single and twin premixed hydrocarbon edge-flames in terms of the effects on $U_{edge}$. A low-${\sigma}$ extinction limit has been discovered for all mixtures tested but further analysis is necessary for full characterization since sufficiently $high-{\sigma}$ leads to an apparent stability limit. Propagation rates clearly show a strong dependence on Le. Future work will focus on completing the premixed hydrocarbon edge-flame analysis and include investigations into non-premixed edge-flames and edge-flames composed of fuels such as hydrogen ($H_2$) with significantly lower Le.

• Journal of Information Processing Systems
• /
• 제17권5호
• /
• pp.905-917
• /
• 2021

In recent years, edge computing technology consists of several Internet of Things (IoT) devices with embedded sensors that have improved significantly for monitoring, detection, and management in an environment where big data is commercialized. The main focus of edge computing is data optimization or task offloading due to data and task-intensive application development. However, existing offloading approaches do not consider correlations and associations between data and tasks involving edge computing. The extent of collaborative offloading segmented without considering the interaction between data and task can lead to data loss and delays when moving from edge to edge. This article proposes a range segmentation of dynamic offloading (RSDO) algorithm that isolates the offload range and collaborative edge node around the edge node function to address the offloading issue.The RSDO algorithm groups highly correlated data and tasks according to the cause of the overload and dynamically distributes offloading ranges according to the state of cooperating nodes. The segmentation improves the overall performance of edge nodes, balances edge computing, and solves data loss and average latency.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1432-1437
• /
• 2018

This work investigated edge-cracking behavior of equiatomic CoCrFeMnNi high-entropy alloy during hot rolling at rolling temperatures $500{\leq}T_R{\leq}1000^{\circ}C$. Edge cracks did not form in the material rolled at $500^{\circ}C$, but widened and deepened into the inside of plate as $T_R$ increased from $500^{\circ}C$. Edge cracks were most severe in the material rolled at $1000^{\circ}C$. Mn-Cr-O type non-metallic inclusion and oxidation were identified as major factors that caused edge cracking. The inclusions near edge region acted as preferential sites for crack formation. Connection between inclusion cracks and surface cracks induced edge cracking. Rolling at $T_R{\geq}600^{\circ}C$ generated distinct inclusion cracks whereas they were not serious at $T_R=500^{\circ}C$, so noticeable edge cracks formed at $T_R{\geq}600^{\circ}C$. At $T_R=1000^{\circ}C$, significant oxidation occurred at the crack surface. This accelerated edge crack penetration by embrittling the crack tip, so severe edge cracking occurred at $T_R=1000^{\circ}C$.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.7-12
• /
• 2023

The edge ring placed on the outside of the electrostatic chuck (ESC) is a key component for protecting the ESC and controlling the etching uniformity of the edge of the wafer. Therefore, it is very important to understand the etching phenomenon of edge rings for edge ring management and equipment homeostasis. In this study, a specimen with SiO₂ hard mask and underlying Si mold was installed on the edge ring surface and the etching results were measured by varying the edge ring 2MHz RF power. By developing PI-VM model with high prediction accuracy and analyzing the roles of key parameters in the model, we were able to evaluate the effect of plasma and sheath characteristics around the edge ring on edge ring erosion. This analysis method provided information necessary for edge ring maintenance and operation.