• 한국연소학회지
• /
• 제11권1호
• /
• pp.34-42
• /
• 2006

Numerical analysis code has been developed to investigate the slab heating characteristics in a reheating furnace of a steel mill company. Unsteady 3-Dimensional behaviour can be predicted with the developed code. Premixed flame model is adopted for combustion phenomena and eddy dissipation model is used for turbulent combustion. Non -gray FVM radiation method is used to get a better accurate radiative solution. Slab movement can be fully traced from entrance into a reheating furnace until it#s exit and computation is performed during that period.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.144-154
• /
• 1994

An efficient tidal model, TIDE which is an iterative type, nonlinear finite element model has developed for the analysis of the tidal movement in the coastal area which is characterized by irregular boundaries and bottom topography. Traditional time domain finite element models have been in difficulties with requirement for high eddy viscosity coefficients and small time steps to insure numerical instability. These problems are overcome by operating in the frequency domain with an elaborate grid system by combining the triangular and quadrilateral shape grids. Furthermore, in order to handle non-linearity which will be more significant in the shallow region, an iterative scheme with least square error minimization algorithm has been implemented in the model. The results of TIDE model are agreed with the analytical solutions in a rectangular channel under the condition of tidal waves entering the channel closed at one end.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2001년도 춘계 수산관련학회 공동학술대회발표요지집
• /
• pp.242-243
• /
• 2001

Tsushima Warm Current(WD entering into the East Sea through the Korean Strait flows northeastward and during this travel it shows complicated movement like meandering and eddy. It is considered that these variations of TWC are important causes making water masses unstable and also have influence on biological and chemical properties of water masses. Lee and Cho(2000) suggested that meandering of TWC in adjacent waters of Noto peninsula has much influence on fluctuation of current structure. (omitted)

• 한국해양학회지
• /
• 제28권4호
• /
• pp.281-291
• /
• 1993

대한 해협 및 황해의 해수수송량 변화와 수입자의 라그랑지안(Lagrangian) 이동경 로의 추적을 통하여 실제의 해저지형을 고려한 시간의존적 간략화된 2차원적 수치모델 의 계산을 수행하였다. 이 일련의 수치실험에서 에디에 의한 쿠로시오 해류의 지류들 은 대륙붕의 해류순환을 조율할 수 있을 정도의 충분한 강도를 지니고 있음을 보여준 다. 대륙붕 지역에서의 이러한 해수유입은 바람, 조류 및 부력 등과 같이 해수운동에 영향을 미치는 중요한 영향력들 중의 하나로 사료된다. 대륙붕사면의 해수수송량 변화 는 쿠로시오 지류, 특히 큐슈섬의 남서지역에서의 수송량 변화가 대한해협 및 황해 남부지역의 수송량과 밀접한 관련이 있음을 보여준다. 모델에 의한 수입자의 궤적은 WOCE/TOGA 계획의 일환으로 얻어진 인공위성추적 표류부의(drifter) 의 궤적과 잘 일 치하고 있으나 그 이동 시간이 현재의 모델에서는 다소 더 걸리고 있는 점이 다르다.

• 한국해양학회지
• /
• 제29권2호
• /
• pp.152-163
• /
• 1994

1967년부터 1986년까지의 국립수산진흥원의 관측자료를 사용하여 동해 남서해역에 서 난수성 소용돌이 (고기압성 소용돌이)의 구조 및 공간분포의 특성과 변동에 대해 연구하였다. 난수성 소용돌이는 울릉도 남서쪽 부근에서 자주 관측되며, 타원형이 많 고, 평균크기는 약 130 km이다. 난수성 소용돌이의 월별분포에 의하면 8월에 관측되는 빈도가 가장 많고, 6월에 가장 적다. 이것은 난수성 소용돌이의 발생이 동한난류 세력 의 발달과 관계가 있음을 나타낸다. 난수성 소용돌이는 서쪽이나 북쪽 또는 남쪽으로 0.80∼2.50 cm/sec의 속도로 이동하거나 한 장소에서 수개월동안 정체한다. 이러한 움 직임은 주변의 해류와 로스비파 및 지형의 영양을 받는다. 난수성 소용돌이의 분포아 해저지형과의 관계는 소용돌이의 이동과 발달이 울릉분지에 의해 영향을 받고 있음을 시사한다. 난수성 소용돌이는 크게 2개의 군으로 나눌 수 있다. 하나는 경압성의 특성 이 강한 수심이 얕은 소용돌이 군이고, 다른 하나는 순압성의 특성이 강한 수심이 깊 은 소용돌이 군이다. 부산과 일본의 모니와의 해수면 차이로 대마난류의 수송량을 추 정할 수 있는데, 수심이 얕은 소용돌이의 분포가 여름철 수송량이 클 때와 일치하였 다. 반면에 수심이 깊은 소용돌이 군은 대마난류의 수송량과 아무런 관계도 보이지 않 았다.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.84-94
• /
• 1996

In order to prevent shell sticking by providing sufficient lubrication between the strand and the mold, the mold oscillation has been used. Now it is well known that the shape of the oscillation curve has a decisive effect on the surface quality of the cast product. Besides, oscillation parameters such as stroke and frequency are also very important. In order to guarantee that parameters which have been found to be optimal for a certain grade of steel do not change with time, periodical checks of the physical condition of the whole equipment are necessary. The portable mold oscillation analyzer with integrated computer, developed by POSCO, records the movement of the mold in every spatial direction. The system uses the gap sensors to measure the mold movement (displacement ) in the two horizontal directions according to the mold narrow and broad faces and the vertical strokes in the four corners of mold. The gap sensor is a non-contacting minute displacement measuring device using the principle of high frequency eddy current loss. The mold oscillation diagnosis system integrates the gap sensors, their converters and the industrial portable computer with plug-in data acquisition boards. The all programs, such as the fast Fourier transformation module (amplitude and phase spectrums) and harmonic analysis module, was coded by LabVIEW$^{TM}$ software as the graphical language. In an own 'expert module' which is included in the diagnosis program, one can obtain much information about the mold oscillation equipment.

• 한국연소학회지
• /
• 제3권1호
• /
• pp.71-78
• /
• 1998

The flame stabilization and the combustion characteristics of diffusion flame formed in the wake of a cylindrical bluff body with fuel injection are studied. With the turbulence generator, the flame stability limits and ion currents were measured and analyzed. The results from this experimental study are summarized as follows. The region with highest average value of ion currents in the middle of flame is moved to the upstream side by the turbulent components of main stream. The flame mass with partially active reaction is moved fast for uniform flow and turbulence generator G3, but the flame mass with relatively slow reaction is moved slowly for turbulence generator G1. If the turbulence generator with strong turbulent component is installed, the turbulent time scale is increased with movement from main stream side to recirculation zone as well as the flame stability limits is deteriorated. Though the special dominant frequency is not appeared in the eddy which exists in flame, high frequency characteristics are appeared in uniform flow and turbulence generator G3, and low frequency characteristics are appeared in uniform flow, turbulence generator G3 and G1.

• 한국수산과학회지
• /
• 제51권1호
• /
• pp.107-112
• /
• 2018

One-dimensional numerical model is implemented to investigate temperature variations in the mixed layer depth (MLD) with the passage of typhoons. In the model, we assume a non-divergent, infinite ocean and consider wind effects only, excluding isostatic effects (inverse barometric effects) and upwelling with vertical movement of the water column. Numerical experiments investigate the effects of typhoon tracks on temperature variations, including their dependence on vertical resolutions in the MLD and these results are compared with those in a three-dimensional primitive equation model (POM). The model reproduces features of the observed temperature variations in the MLD fairly well, and implies that wind effects, rather than isostatic effects, play a predominant role in temporal and spatial temperature variations in the MLD. After the passage of typhoons, however, the model does not reproduce well the temperature variations observed in the MLD, because a limitation of the model is its inability to reproduce events such as cyclonic eddy formation (Hong et al., 2011; Masuda and Hong, 2011). The model also shows well the so called 'rightward bias' (Price, 1981) of sea surface cooling which is the most predominant in the right hand side of typhoon's track.

• Journal of Chest Surgery
• /
• 제20권3호
• /
• pp.458-472
• /
• 1987

A heart supplies bloods of about 15, 000 liters to each human organ in a day. A normal function of heart valves is necessary to this act of heart. The disease of heart valve develops to a narrowness of a closure, resulting in an abnormal circulation of bloods. In an attempt to eliminate the affliction of heart valves, the operation method to repair with artificial heart valves has been developed and saved numerous patients over past 30 years. This replacement operation has been performed since early 1960`s in Korea, but all the artificial heart valves used are imported from abroad with very high costs until recent years. The artificial heart valve using pyrolytic carbon has been developed at KAIST, which was proved to be stable in the mechanical performance and durability. Therefore, the in viva performance of this valve was examined through animal tests. The artificial heart valves used in this study are tilting disc type valves, in which the disc were made of graphite coated with pyrolytic carbon and the cages were made of titanium. In viva testings of these valves were performed in 12 dogs, in which right ventriculo-pulmonary arterial [Croup I] or inter-aortic [Croup IV] valved conduit was implanted using polytetrafluoroethylene conduits containing KAIST valve and aortic valve [Group II] or pulmonary valve [Croup III] was replaced by a KAIST valve with a 21mm or 19mm tissue annulus diameter. In group I and II, pre-and post-operative transvalvular pressure gradient was measured and compared with other prosthetic valves. During post operative period laboratory examination was performed including hemoglobin, hematocrit, red cell count, white cell, lactic acid dehydrogenase and platelet. The eight surviving dogs were sacrificed and autopsy was performed at 2, 6, and 8 weeks. KAIST valve has low transvalvular gradient and relatively high orifice area. Average ventriculo-aortic peak systolic transvalvular gradient was 14 mmHg in 21 mm valve and 19 mmHg in 19 mm valve. The valve has slight intravascular hemolysis effect. Thrombogenic effect of low polishing quality and eddy currents around small orifice is high. The valve has vulnerability of disc movement. These animal tests suggest that the improvement of the heart valve design, surface polishing state and prescription methods.

• Ocean and Polar Research
• /
• 제31권1호
• /
• pp.11-29
• /
• 2009

Variability of sea surface temperature (SST) in the Japan/East Sea (JES) was studied using complex empirical orthogonal function (CEOF) analysis. Two daily data sets were analyzed: (1) New Generation 0.05o-gridded SST from Tohoku University, Japan (July 2002-July 2006), and (2) 0.25o-gridded SST from the Japan Meteorological Agency (October 1993-November 2006). Linkages with wind stress curl were revealed using 6-h 1o-gridded surface zonal and meridional winds from ancillary data of the Sea- WiFS Project, a special National Centers for Environmental Prediction/National Center for Atmospheric Research (NCEP/NCAR) product (1998-2005). SST anomalies (SSTA) were obtained by removing the seasonal signal, estimated as the leading mode of the CEOF decomposition of the original SST. Leading CEOF modes of residual SSTA obtained from both data sets were consistent with each other and were characterized by annual, semiannual, and quasi-biennial time scales estimated with 95% statistical significance. The Semiannual Mode lagged 2 months behind the increased occurrence of the anticyclonic (AC) wind stress curl over the JES. Links to dynamic processes were investigated by numerical simulations using an oceanic model. The suggested dynamic forcings of SSTA are the inflow of subtropical water into the JES through the Korea Strait, divergence in the surface layer induced by Ekman suction, meridional shifts of the Subarctic Front in the western JES, AC eddy formation, and wind-driven strengthening/weakening of large-scale currents. Events of west-east SSTA movement were identified in July-September. The SSTA moved from the northeastern JES towards the continental coast along the path of the westward branch of the Tsushima Current at a speed consistent with the advective scale.