• Economic and Environmental Geology
• /
• v.39 no.5 s.180
• /
• pp.615-626
• /
• 2006

The natural resources and material life-cycle include all human activities related to resources and material extraction, transportation, processing, use, recovery and disposal. Sustainable material management (SMM) is an integrated set of policy approaches targeted on economic agents throughout the material life-cycles and designed to result in economically efficient and environmentally effective material use. The material flows of industrial mineral, ores and fossil fuels have also long been a focal area for environmental policies because of the high environmental pressures associated with extraction, processing, consumption, and final disposal of these materials. OECD work on material flow is to improve the quantitative and analytical knowledge bases about natural resource and material flows within and among countries, so as to better understand the importance of material resources in member countries' economies. In several EU Member States, material flow accounts are part of official statistics. Material flow analysis (MFA) is a valuation method which assesses the efficiency of use of materials using information from material flow accounting. Material flow analysis helps to identify waste of natural resources and other materials in the economy which would otherwise go unnoticed in conventional economic monitoring systems. Resource use and resource efficiency has emerged as a major issue for long-term sustainability and environmental policy.

• Environmental and Resource Economics Review
• /
• v.21 no.2
• /
• pp.321-340
• /
• 2012

Korean government recently announced that new passenger cars sold within South Korea in 2009 ran an average of 12.27 kilometers per liter of fuel, which is an 7% point increase of the fuel efficiency. The government interpreted these improvements in the fuel economy as energy savings of 60,000 toe and as a reduction of 160,000 ton $CO_2$ emissions. However, improvements in energy efficiency make energy services cheaper, which is known as rebound effect. If this rebound effect exists, and the size of the effect is not negligible, ignoring this could result in overestimating the energy savings achieved by the fuel efficiency increase. Using detailed data on household and vehicle characteristics, our results suggest that there exist a short-run rebound effect of 0.299(29.9%) for the Korean automobile industry. This is notably smaller than the estimates of West (2004), which finds an estimate of 87% using cross-section data for the US. Furthermore our results highlight the importance of rebound effect on energy savings and the $CO_2$ emissions reduction. Our estimates suggest that the report from Korean government overestimates the energy savings and related $CO_2$ emissions by 29.9% point.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.97-105
• /
• 2009

It is expected that logistics standardization have an great effect on industry and national economy due to cost saving and improving efficiency. Therefore all countries of the world make a strenuous effort to take a lead of logistics standardization Despite such efforts of every country, our country remained a lukewarm attitude about logistics standardization. Especially, our country remained a lukewarm attitude about logistics standardization effect quantify. We have to suggest the necessity of standardization and the effect for carrying out logistics standard. So, this study performed literature review and case study for development of effect valuation method. Also, this study developed effect valuation standard for quantifiable standardization effect and drew the effect valuation standard model. First, the measure of preliminary effectiveness was chosen for MOE selection. As a results, vehicle load ratio, delivery cost, keeping space efficiency warehouse automation ratio, etc. were selected. Then, vehicle/truck load ratio, warehouse keeping efficiency, up unloading hour, packaging cost, consistency transportation ratio were chosen for MOE of pallet standardization.

• Review of Culture and Economy
• /
• v.20 no.2
• /
• pp.149-171
• /
• 2017

This paper presents empirical findings about the market inefficiency field in the korean horse track. We first use the place betting data instead of the win betting data inevitably depended on by past studies, and discuss the degree of the long shot anomaly and the bettor's risk attitude sequentially in the place betting market. The empirical result of betting simulations using the place winning function in this study reveals persistently higher returns than the expected payoff in korean racetrack betting market. The clear departures from perfect efficiency in horse-racing betting imply that much of the market information is insufficient and less accurate. This market asymmetry aggravates popular speculations exquisitely since people are attracted by the higher odds figures in the racetrack display although those are much uncertain in future. The findings suggest the more objective and credible information of winning possibilities such as the place winning function including the smart information of marginal odds needs to be available to the betting decision of the public, which contributes to reducing the speculative spirit in korean racetrack.

• Journal of Climate Change Research
• /
• v.1 no.3
• /
• pp.205-210
• /
• 2010

LED light has various advantages such as an energy saving effect of over 80% compared to existing lighting and environmentally friendly characteristics; however, there has been no affordable market for LED lighting because of its expensive price. This study discussed the validity of the expansion of distribution of LED lighting through an assessment of economic efficiency concerning LED lightening in order to analyze its efficiency in terms of energy savings and maintenance and repair, which will be generated as a result of the change from existing incandescent bulbs to LED lighting in the public sector. As to the target of analysis, the paper reviewed the validity of change to LED lighting as a result of the elimination of existing incandescent bulbs, by referring to 'the current incandescent bulb use and elimination performance' published by the Ministry of Knowledge Economy based on the "Elimination management system" executed by Korea Energy Management Corporation. The paper considered expenses for change, annual power savings amount and electric charges savings amount, repair and maintenance cost, $CO_2$ reduction volume, and the profit from the sale of CER (certified emission reduction). As a result of analyzing economic efficiency, when the discount rate during the change of existing incandescent bulb lighting to LED lighting is 3.26%, the profit was 8,648,400,000 won. Accordingly, NPV was analyzed to have a 'positive (+)' value, which means that this change is profitable.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.603-615
• /
• 2020

The design factors of artificial recharge are determined by considering the hydrogeological characteristics of the aquifer. The optimal design factors for artificial recharge were derived after performing the injection tests step by step for each injection type (vertical well, ditch and mixed type), which were built in the test site of the study area. It was analyzed that the difference in the injection effect according to the diameter of the injection well was not large, and the 100 mm well was evaluated as appropriate in consideration of the availability and economy of land use. Since the injection effect was well maintained even in the upper rock, the depth of the injection well was proposed for the alluvial layer and the upper rock layer. On the other hand, in four cases of filter media in the ditch, it was analyzed that the penetration efficiency and the hydraulic interference effect indicated excellent injection performance when a filter medium of 10 to 30 mm diameter was filled in the ditch. In addition, the proper spacing of the injection wells was analyzed as 9~12 m considering the interference efficiency. The interference efficiency attenuation coefficient per 1 m of hole spacing was calculated to be 1.75% in this area. In the future study, the artificial recharge design factors obtained in this stage are applied and verified on site construction and operation. Also it is expected to contribute to securing water in areas where there is always a lack of water.

• Clean Technology
• /
• v.30 no.2
• /
• pp.71-93
• /
• 2024

Recently, the establishment of a hydrogen-based economy and the utilization of low-carbon energy sources, particularly for shipping and power generation, have been in high demand in order to achieve carbon neutrality by 2050. In particular, ammonia is gaining renewed attention because it is capable of serving as a key facilitator for high-efficiency green hydrogen storage and transportation and it is also capable of serving as a low-carbon energy source. Although ammonia can be synthesized through the Haber-Bosch process, the high energy consumption and carbon emissions associated with this process result in minimal carbon reduction. To address the critical drawbacks of the traditional Haber-Bosch process, various thermochemical synthesis methods have been developed recently, allowing for the synthesis of ammonia with lower carbon emissions and a higher energy efficiency. Research is also progressing in the development of high-performance catalyst materials that are capable of demonstrating sufficient ammonia synthesis performance under milder process conditions compared to conventional methods. Additionally, a variety of different processes such as chemical-looping ammonia synthesis, plasma synthesis, and mechanochemical synthesis are being applied diversely. This review aims to provide a detailed overview of the emerging ammonia synthesis technologies that have been developed to effectively store green hydrogen for future applications.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.151-165
• /
• 2019

In this study, the four types of improvement methods (increase self weight and reducing sliding force etc.) were proposed depending on install location with compaction grouting to improve seismic performance of existing port structure and optimal methods by analyzing the effects of improvement (stability, constructability and economy) by theoretical and numerical methods. From the dynamic time history analysis for artificial seismic waves, the results indicated that the horizontal displacement after improvement decreased compared to before improvement, however the displacement reduction effect among improvement methods was not significantly different. Slope stability based on the strength reduction method and the limit equilibrium analysis method, it is confirmed that the passive pile method is more safe than other methods. It is due to the shear strength at the failure surface is increased. In addition, the analysis of constructability and economy showed that the reduction of earth pressure method (type 02) and the passive pile method (type 03) are excellent. However, in the case of the passive pile method is concerned that there is a shortage of design cases and the efficiency can be reduced depend on various constraints such as ground conditions.

• Convergence Security Journal
• /
• v.14 no.6_1
• /
• pp.99-112
• /
• 2014

National Defense & IT Convergence is ensuring actual force integration by developing new IT Convergence Technology for the purpose of realizing the concept of Network Centric Warfare. The Ministry of Defense has appointed National Defense & IT Convergence Center of Defense Agency for Technology and Quality as a specialized agency for the National Defense & IT Convergence development, a mission in the creative economy era and has been active in military demand inquiry and prior technology plan with the industrial-academic research institute for discovery of National Defense IT Convergence projects based on the Convergence Center. Further, it is promoting focused on the timely introduction of private IT new technology by operating the project planning team comprised of defense domain specialists and by applying the advanced planning method etc. Accordingly, for the development of National Defense & IT convergence, developmental strategy is urgently required to be utilized effectively after considering theoretically on the national IT Convergence policy enforcement and phenomenon of National Defense & IT Convergence technology and analyzing them comprehensively. This thesis promotes in phases the IT Convergence projects which are identified for the development, improves the efficiency of newly created National Defense & IT Convergence center and suggests training program of IT Convergence personnel related to the defense reforms. With such, it will achieve smart defense in advance and will also contribute largely for the realization of the immediate paradigm shift and of the creative economy.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.1
• /
• pp.121-130
• /
• 2016

There is a growing interest in the technology transfer and commercialization both at home and abroad. Accordingly, this study looked at the concept of technology transfer and commercialization, identified the factors that should be taken into account in order to facilitate technology transfer and commercialization, and then performed a empirical analysis. As for the conventional technology transfer and commercialization, there was a tendency to limit its scope to the exploration, transfer and commercialization of technology itself. Here in this research, technology transfer and commercialization is defined the category to expand as various activities implemented in order to make sure that intellectual properties such as intangible technological developments, know-how, and knowledge are transferred between the relevant parties through a contract or negotiation, and the party to which the transfer is made can then further develop and exploit the technology into tangible products and other activities to obtain economic benefit out of that. In addition, the findings of the positive analysis of technology transfer and commercialization revealed that the focus of facilitating technology transfer has been on the technology itself, its management and securing efficiency of the systems and institutions involved in the technology transfer and commercialization. So there was lack of recognition as to the importance of financial support given to the phase of technology commercialization. This indicates that when it comes to the technology transfer and commercialization, quantitative performance has been the focus of interest such as patent application, registration, number of technology transfers, royalty, etc. So there was not enough understanding as to the issues of starting up a business, creating quality jobs through technology transfer and commercialization, which are directly related to the realization of the creative economy. In this regard, this research is expected to be used for the development for the future policies to boost technology transfer and commercialization as it suggests not only simply ensuring quantitative performance but also necessary to create the environment for the creation of the stable ecosystem for the parties involved in the technology transfer and commercialization and then to build circumstances in which creative economy can be realized.