• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.43-44
• /
• 2015

Electrodeposited Ni and Ni-SiC composite coatings were prepared on Cu substrates by using the Ni-Sulfamate electrolytic bath. Thus prepared samples were subjected for the two different types of post surface modification techniques; i.e. Laser Surface Texturing (LST) and Ultrasonic Nano Surface Modification (UNSM), respectively in order to investigate their effects on surface and interface related properties of the coatings. Hemispherical dimples, with 80 to 200 um dimple spacing, were created and examined on the surfaces of the materials studied. The results revealed that micro-surface texturing with 150 um dimple spacing considerably improved the coefficient of friction. Dimple spacing accuracy and incorporated second phase ceramic particles both contributed significantly to reduction in coefficient of friction. On the other hand, application of UNSM considerably modified the surface topography, led to increase the Vickers microhardness, and reduced the wear and coefficient of friction as compared to non UNSM treated Ni and Ni-SiC samples.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.37-38
• /
• 2007

This paper reports the characteristics of piezoelectric microspeakers that are audible in open air with high quality piezoelectric AlN thin film according to the materials properties. When we use a tensile-stressed silicon nitride diaphragm as a supporting layer, the Sound Pressure Level (SPL) is relatively small. However, the SPL of the fabricated microspeakers that have compressive-stressed composite diaphragm show higher output pressure than those of tensile-stressed diaphragm. It produces more than 60dB from 100Hz to 15kHz and the highest SPL is about 100dB at 9.3kHz with 20 Vpeak-to-peak sinusoidal input biases and at 10 mm distances from the fabricated microspeakers to the reference microphone.

• Animal cells and systems
• /
• v.13 no.2
• /
• pp.133-139
• /
• 2009

Green tea seed was extracted with absolute ethanol,and the green tea seed extract(GTSE)was subjected to assays for toxicity, antioxidant ability, angiogenesis inhibitory effects and cell adhesion, as well as western blotting, and an in vivo experiment against 4 high-ranking adult cancers in Korea. Our series of experimental data demonstrated that GTSE has an antioxidant ability superior to that of EGCG in the green tea leaf, and also exhibits a profound high tumor growth inhibitory activity on a variety of cancer cell lines, as well as nude mice infected with cancer cells. GTSE was identified as a natural anticancer compound showing excellent angiogenesis inhibition and cancer cell suppression abilities. Our preliminary observations also indicate that GTSE may be another potential source of natural dietary antioxidants and also may be applicable as a novel natural anticancer agent.

• Mycobiology
• /
• v.48 no.4
• /
• pp.326-329
• /
• 2020

Valuable natural compounds produced by a variety of microorganisms can be used as lead molecules for development of new agrochemicals. Furthermore, high-throughput in vitro screening systems with specific modes of action can increase the probability of discovery of new fungicides. In the current study, a rapid assay tested with various microbes was developed to determine the degree of respiratory inhibition of Saccharomyces cerevisiae in two different liquid media, YG (containing a fermentable carbon source) and NFYG (containing a non-fermentable carbon source). Based on this system, we screened 100 fungal isolates that were classified into basidiomycetes, to find microbial secondary metabolites that act as respiratory inhibitors. Consequently, of the 100 fungal species tested, the culture broth of an IUM04881 isolate inhibited growth of S. cerevisiae in NFYG medium, but not in YG medium. The result is comparable to that from treatment with kresoxim-methyl used as a control, suggesting that the culture broth of IUM04881 isolate might contain active compounds showing the inhibition activity for respiratory chain. Based on the assay developed in this study and spectroscopic analysis, we isolated and identified an antifungal compound (-)-oudemansin A from culture broth of IUM04881 that is identified as Oudemansiella venosolamellata. This is the first report that (-)-oudemansin A is identified from O. venosolamellata in Korea. Taken together, the development of this assay will accelerate efforts to find and identify natural respiratory inhibitors from various microbes.

• The Plant Pathology Journal
• /
• v.32 no.5
• /
• pp.423-430
• /
• 2016

Clubroot disease caused by Plasmodiophora brassicae is one of the most serious diseases in Brassica crops worldwide. In this study, the pathotypes of 12 Korean P. brassicae field isolates were determined using various Chinese cabbage including 22 commercial cultivars from Korea, China, and Japan, and 15 inbred lines. All P. brassicae isolates exhibited the typical clubroot disease on non-clubroot resistant cultivar, indicating that the isolates were highly pathogenic. According to the reactions on the Williams' hosts, the 12 field isolates were initially classified into five races. However, when these isolates were inoculated onto clubroot-resistant (CR) cultivars of Chinese cabbage, several isolates led to different disease responses even though the isolates have been assigned to the same race by the Williams' host responses. Based on the pathogenicity results, the 12 field isolates were reclassified into four different groups: pathotype 1 (GN1, GN2, GS, JS, and HS), 2 (DJ and KS), 3 (HN1, PC, and YC), and 4 (HN2 and SS). In addition, the CR cultivars from Korea, China, and Japan exhibited distinguishable disease responses to the P. brassicae isolates, suggesting that the 22 cultivars used in this study, including the non-CR cultivars, are classified into four different host groups based on their disease resistance. Combining these findings, the four differential hosts of Chinese cabbage and four pathotype groups of P. brassicae might provide an efficient screening system for resistant cultivars and a new foundation of breeding strategies for CR Chinese cabbage.

• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.531-538
• /
• 2012

Hollow silica spheres were prepared by spray drying of precursor solution of colloidal silica. The precursor solution is composed of 10-20 nm colloidal silica dispersed in a water or ethanol-water mixture solvent with additives of tris hydroxymethyl aminomethane. The effect of pH and concentrations of the precursor and additives on the formation of hollow sphere particles was studied. The spray drying process parameters of the precursor feeding rate, inlet temperature, and gas flow rate are controlled to produce the hollow spherical silica. The mixed solvent of ethanol and water was preferred because it improved the hollowness of the spheres better than plain water did. It was possible to obtain hollow silica from high concentration of 14.3 wt% silica precursor with pH 3. The thermal conductivity and total solar reflectivity of the hollow silica sample was measured and compared with those values of other commercial insulating fillers of glass beads and $TiO_2$ for applications of insulating paint, in which the glass beads are representative of the low thermal conductive fillers and the $TiO_2$ is representative of infrared reflective fillers. The thermal conductivity of hollow silica was comparable to that of the glass beads and the total solar reflectivity was higher than that of $TiO_2$.

• World Technopolis Review
• /
• v.3 no.2
• /
• pp.89-96
• /
• 2014

Center for Research of Science and Technology ("PUSPIPTEK") has 460 hectares land area, still maintained as a green area with more than 30% green space. There are 47 centers for research and testing technology, technology-based industries, and as well as public supporting facilities in PUSPIPTEK area. Based on the concepts developed to make this area as an ecological region, PUSPIPTEK can be seen as a model of eco-innovation. The purpose of this research is to develop a model of water, energy and waste management with eco-innovation concept. As a new approach in addressing environmental degradation and maintaining the sustainability of ecosystem, studies related to eco-innovation policy that combines the management of water, energy and waste in the region has not been done. In order to achieve the objectives of the research, a series of techniques for collecting data on PUSPIPTEK existing conditions will be carried out, which includes utilities data (water, electricity, sewage) and master plan of this area. The savings over the implementation of the concept of eco-innovation in water, energy, and waste management were calculated and analyzed using quatitative methods. The amount of cost savings and feasibility were then calculated. Eco innovation in water management among other innovations include the provision of alternative sources of water, overflow of rain water and water environments utilization, and use of gravity to replace the pumping function. Eco-innovation in energy management innovations include the use of LED and solar cell for air conditioning. Eco-innovation in waste management includes methods of composting for organic waste management. The research results: (1) The savings that can be achieved with the implementation of eco innovation in the water management is Rp. 3,032,640 daily, or Rp.1,106,913,600 annually; (2) The savings derived from the implementation of eco innovation through replacement of central AC to AC LiBr Solar Powered will be saved Rp.1,933,992,990 annually and the use of LED lights in the Public street lighting PUSPIPTEK saved Rp.163,454,433 annually; (3) Application of eco innovation in waste management will be able to raise awareness of the environment by sorting organic, inorganic and plastic waste. Composting and plastic waste obtained from the sale revenue of Rp. 44,016,000 per year; (4) Overall, implementation of the eco-innovation system in PUSPIPTEK area can saves Rp. 3,248,377,023 per year, compared to the existing system; and (5)The savings are obtained with implementation of eco-innovation is considered as income. Analysis of the feasibility of the implementation of eco-innovation in water, energy, and waste management in PUSPIPTEK give NPV at a 15% discount factor in Rp. 3,895,228,761; 23.20% of IRR and 4.48 years of PBP. Thus the model of eco-innovation in the area PUSPIPTEK is feasible to implement.

• Journal of Engineering Education Research
• /
• v.15 no.5
• /
• pp.25-30
• /
• 2012

"The engineering education program for environmental intention and value creation" has been executed from 2008 to 2010 in Suzuka National College of Technology, which program was promoted as "Good Practice for Education" by Ministry of Education, Culture, Sports, Science and Technology Japan. "Eco-car project" is one of these practical ecology/environment education programs. The project's members have been learning and researching the environmental managements by the process of design, manufacturing, and assembly of solar car, highly effective fuel consumption car (Eco-run car), electric vehicle and fuel-cell car. Also this project was supported by some professional experts of the local industries and community. The students learned the actual industrial technique, the engineering management and the structure of local industries by this project. In this paper, the environmental intention engineering design education with local industry collaboration is introduced.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.155-160
• /
• 2007

This study describes thermal performance of Plus50 eco-building with new technology such as power window system, green wall, structure material, etc. The Plus50 eco-building is house experimental which is constructed by Korea Institute of Construction Technology. In order to estimate thermal performance of the building, TRNSYS program and Prebid, and its sub-modules are used. The results showed that maximum heating and cooling load in the building are calculated at 1st floor and 4th floor, respectively. And also energy saving of the building is calculated as over 30% compared to conventional apartment house.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1203-1206
• /
• 2008