• 한국환경과학회지
• /
• 제17권1호
• /
• pp.113-118
• /
• 2008

[ $6{\sim}13mg/L$ ] base water concentration on monthly BOD has been kept at the Geukrak bridge point for this research target and it indicates the water quality under the existed rank. Due to this present condition of water quality, the demage of ecology from the upper stream to the lower one of the bridge could be conjectured. Moreover, nonstructural extinction of the ecology seems to have gotten worse between both the streams of Yeoungsan River. On this research, eco-corridor between the upper stream and the lower stream of the river should be ensured, the ecological demage needs to be cut off, a dispersed discharge method which the existed method of the 1st sewage plant in Gwangju was enhanced to should be inducted for the procuring of various water ecosystem, and the conditions by the scenario suggested from this research could be applied to a water quality model. then, analysis the improvement effect of the water quality adjacent the river. From the test result, Case3-Type1 scenario is thought to be the best one. From the test result with Case3-Type1 when the concentrated discharge was never done, 0.07 mg/L of BOD concentration was increased at the lower stream where Yeoungbon B point (Haksan Bridge) is but the water improvement effect of $0.24{\sim}2.87mg/L$ is thought to have been done at the area of water deterioration.

• 한국전자통신학회논문지
• /
• 제11권10호
• /
• pp.983-988
• /
• 2016

사물인터넷이란 사람과 사물, 사물과 사물은 클라우드를 통해 연결 있다. 새로운 ICT기술로 LED조명과의 결합을 통해 획기적 에너지 절감이 가능하고 인간중심, 친환경, 그리고 사용자 요구환경에 부합되는 콘텐츠가 내장된 다기능 솔루션을 사용자 요구사항에 맞추어 실시시간으로 제공하는 산업간, 기술 융합형 시스템화되 차세대 조명이라고 할 수 있다. 본 논문에서는 인간중심으로 스마트 기기와 클라우드를 활용한 LED조명 제어 시스템구축과 관련하여 무선을 통한 아두이노 윤보드 연결에 사용자가 스마트 기기로 클라우드를 통해 LED조명이 켜지거나 혹은 꺼지는지를 관해서 개발 하였다. 아두이노 윤에서는 인터넷에 연결된 후, 현재 날짜와 시간정보를 리눅스 쉘 명령을 통해 취하고 그 값을 브리지(BRIDGE)를 통해 오는 방법을 사용했다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1129-1135
• /
• 2011

Recently, In Korea region becoming subtropical climate, freezing index values have been increasing in winter. The climate condition in Korean became polarized. Since freezing index is increased recently, track heaving from frost is often occurred, which is ignored in past couple of years. Methods to prevent frost-heaving are circumfusion of calcium chloride and replacement of gravel ballast in usual. The effects of those methods are minimal, incontinuous, and not eco-friendly. Therefore, maintenances are performed repeatedly every year. This study discussed utilizing the waste-tire-chips and insulators in the small structures(bridge and box etc) for prevention of frost-heaving. In order to prove effect of waste-tire-chips, laboratory and field tests were conducted with CBR and measurement of frost-heaving amount to prove and verify effect of insulators.

• Molecular & Cellular Toxicology
• /
• 제1권3호
• /
• pp.143-148
• /
• 2005

This review aims to show that industrial sustainable chemistry, minimizing or reducing the ecological impacts by the chemicals, is not an emerging trend, but is already a reality through the application of 'White Biotechnology' such as 'green' chemistry and engineering expertise. A large number of current industrial case studies are presented, as well as new developments from the chemical industry. The case studies cover new chemistry, new process design and new equipment. By articulating the requirements for industrial application of sustainable chemistry, this review also seeks to bridge any existing gap between academia and industry regarding the R & D and engineering challenges needed to ensure green chemistry research enables a more sustainable future chemical industry considering eco-toxicological impacts.

• 환경영향평가
• /
• 제21권1호
• /
• pp.209-218
• /
• 2012

In this study, suitable types and measures of Wildlife Crossing Structures (WCS) for mammals of Korea were analyzed to suggest basic information for design guidelines of WCS. In order to find the types and measures, we conducted field surveys on 79 WCS and literature reviews on 159 WCS. The results of our study were as follows; Small-medium sized carnivores usually use all measures of wildlife underpass, meanwhile large sized herbivores as water deer need lager measures than 0.7 Openness Index(OI). Furthermore, we found that wildlife overpasses were usually used at the measure of 6.8 m width by every mammal. Therefore, we concluded that the proper measures should be lager than 0.7 OI for underpass and 7 m width for overpass.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.911-919
• /
• 2013

This paper reports the development of test bed with the energy recovering technique using two-step boost converter. The device is utilized for LDC aging test of Hyundai Motor's LPI AVANTE HEV in mass production. The developed power recycle type test bed is designed as 1.5 kW class to test up to the maximum load power of LDC and is also designed to supply scant power supply up to 500 W after power recycle. The theoretical design analysis and operational characteristics analysis results of test bed are reported, and its practicality and reliability are verified through the test result. Also, the finally developed test bed confirms approximately 79~85 % energy saving effect compared to the usual traditional aging test system.

• 대한건축학회논문집:계획계
• /
• 제34권7호
• /
• pp.21-29
• /
• 2018

This study aimed to find and suggest the purpose of future plans, critical items on designing and Related standards to amend construction standards for domestic energy saving and environmentally friendly housings. It would also activate and increase the supplies of passive house minimizing the problems on current apartment housings in winter and reducing heating energy which brings fine dust pollution. After defining the standard model of Korean apartment housings(reference model), this study calculated the amount of heating energy demand per unit area annually as applying the yearly changed standards from 2008 to 2017 to existing standard model. It turned out that applying 2017 construction standards of energy saving and eco-friendly housings to reference model has saved up to 75% of heating energy demand comparing to the one applied 2008's. However, it still could not solve the fundamental problems such as winter fungus, condensation, freezing, freeze and burst, and insulation weakness space, and could not be free from fine dust particles. To solve them, this study suggested improved standards adding critical items on design related to outside insulation, cut off the heat-bridge, enforce air-tightness and heat change efficiency on heat recovery ventilator. As a result, it has reduced more than 10% of heat demand from 2017. It would be more than 90% of savings from 2008 if we make the amount of heat loss be zero on heat bridge on designing stage in the future.

• 생태와환경
• /
• 제54권4호
• /
• pp.384-389
• /
• 2021

본 연구는 2020년 10월 23일에 경기도 가평군 설악면에 위치한 청평호에서 수행되었으며, 어군탐지기를 이용해 획득한 자료를 기반으로 어류의 수평 및 수직 분포 패턴을 분석하였다. 어군탐지 조사가 수행된 구간의 총 수면적은 782,853 m²였으며, 수심(water depth, WD)이 10~12 m인 구간이 전체 수면적의 31.7%로 가장 넓게 분포하는 것으로 나타났다. 다양한 WD 구간별로 어류의 개체 밀도 산출 결과, 4~6 m 구간에서 0.98 개체/100 m²로 가장 높게 나타나, 수면적 대비 가장 많은 어류가 분포하는 것으로 확인되었다. Heat map 분석 결과 청평호 구간에서는 가평대교의 우안측에서 어류의 밀도가 가장 높게 나타났으며, 이러한 수평 분포 특성에서 특별한 경향성은 확인할 수 없었다. 어류의 수직분포 분석 결과, 어류가 관측된 수심(Fish depth, FD)이 6 m 이하인 경우가 전체 관측 대비 86.6%로 나타났다. 수심 대비 어류의 관측 수심(Relative height, RH) 분석 결과, 수심이 깊어질수록 어류가 상대적으로 표층에 분포하는 경향성을 확인할 수 있었다. 이와 관련해서는 수체의 수심별 수온 차이 등 다양한 원인이 있을 것으로 예상되며 추가적인 연구가 필요하다.

• 에너지공학
• /
• 제29권3호
• /
• pp.50-56
• /
• 2020

Currently, 3D printing technology is a new revolutionary additive manufacturing process that can be used for making three dimensional solid objects from digital films. In 2019, this 3D printing technology spreading vigorously in production parts (57%), bridge production (39%), tooling, fixtures, jigs (37%), repair, and maintenance (38%). The applications of 3D printing are expanding to the defense, aerospace, medical field, and automobile industry. The raw materials are playing a key role in 3D printing. Various additive materials such as plastics, polymers, resins, steel, and metals are used for 3D printing to create a variety of designs. The main advantage of the green cement for 3D printing is to enhance the mechanical properties, and durability to meet the high-quality material using in construction. There are several advantages with 3D printing is a limited waste generation, eco-friendly process, economy, 20 times faster, and less time-consuming. This research article reveals that the role of green cement as an additive material for 3D printing.

• 한국농촌건축학회논문집
• /
• 제20권3호
• /
• pp.47-56
• /
• 2018

This study is to research the military remains of Korean War(1950~53) focused on Yeonchen, Cheorwon, and Hwacheon-gun in the central border of DMZ. The Yeoncheon-gun is installing 'Yeolsoe' and 'Taepung' observatory in the frontline battlefield adjacent to Southern Limit Line(SLL), and not only protects many military remains including war memorial and crematory facilities of UN troops, but also utilizes them as active educational places. The Cheorwon-gun is actively making known 'Baengmagoji memorial, 'Labor party office' and other buildings adjacent to 'Tourist security DMZ', but needs to set up many monuments around battlefields of 'Gimhwa' and 'Daeseongsan' adjacent to 'Eco-peace park DMZ'. With the battlefield of 'Paroho' as the center, which our troops made brilliant military gains during the war, the Hwacheon-gun protects and informs military remains such as '643 and 490 battlefields', 'Kkeomeok and Guman bridge'. Developing a network for military remains in connection with the annual local festivals, the experience tour and security will be available at these places.