• 제목/요약/키워드: Eccentric propeller forces

검색결과 3건 처리시간 0.02초

스트레인 게이지법을 이용한 4,700 DWT 선박의 우현 전타시 프로펠러 편심추력이 축 거동에 미치는 영향 연구 (The Effect of Transient Eccentric Propeller Forces on Shaft Behavior Measured Using the Strain Gauge Method During Starboard Turning of a 4,700 DWT Ship)

  • 이재웅;김홍렬;임긍수
    • 해양환경안전학회지
    • /
    • 제24권4호
    • /
    • pp.482-488
    • /
    • 2018
  • 선박 축계는 프로펠러 하중의 영향으로 선미관 후부베어링의 국부하중 증가가 현저히 나타나 축계 선미관 베어링 손상의 위험이 증대된다. 이를 방지하기 위해 수행된 추진축계 정렬연구는 주로 준정적 상태(quasi-static condition)에서 축과 지지베어링간의 상대적 경사각을 감소시키는데 중점을 두어 진행되어 왔다. 그러나 보다 상세한 평가를 위해서는 동적상태를 추가로 고려하는 것이 필요하다. 4,700 DWT 선박을 대상으로 NCR로 운전중 급속으로 우현 전타할 때 추진축계가 받는 영향에 대해 연구하였다. 연구결과 선미 유동장 변화에 의해 프로펠러 편심추력이 과도 상태가 되어 프로펠러에 불평형 진동이 유발되는 것을 확인하였다. 우현 전타시의 프로펠러 편심추력은 NCR 조건대비 축을 선미관 베어링으로부터 들어 올리는 힘으로 작용하여 선미관 베어링 하중완화에 기여하고 있음을 확인하였다.

선박의 직진과 선회 시의 프로펠러 하중이 프로펠러 축 베어링에 미치는 영향 (Effects of Propeller Forces on the Propeller Shaft Bearing during Going Straight and Turning of Ship)

  • 신상훈
    • 대한조선학회논문집
    • /
    • 제52권1호
    • /
    • pp.61-69
    • /
    • 2015
  • In the beginning of the 1990's, numerous shaft bearing damages, especially in aft stern tube bearing, were reported. The main reasons of bearing damages were estimated that hull deflections have been increased by more flexible hulls and propeller dynamic loads have not been considered in shaft alignment. After that time, studies to take into account hull deflections in shaft alignment have been actively carried out, but for the latter leave much to be desired. In this study, the effects of the propeller forces on the propeller shaft bearing have been investigated by estimating thrust eccentricity as reasonable as possible although some assumptions to simulate turning of ship were introduced. Three dimensional nominal wake to estimate thrust eccentricity have been calculated by using CFD analysis and model test in the towing tank. This study presents the procedure to estimate the propeller eccentric forces and their influence on the stern tube bearing for a container carrier. As a result, it has been found that the lateral propeller forces in turning condition should be considered in shaft alignment to prevent shaft bearing damages.