• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.179-186
• /
• 1998

Three phase squirrel cage induction motor is generally adopted as a traction motor to drive high speed trains because of its robustness for surrounding environment and easy maintenance. In the design of traction molar, reduction of weight is very important in order to reduce kinetic energy to accelerate the vehicle. Therefore, in this paper, design variables of a preliminary designed traction motor to minimize its weight is determined using the optimization technique. Before the optimization process, rotor slot number is determined to reduce vibration and noise by the analysis of magnetic force. As a result, a design example to reduce weight by 12% than that of the preliminary designed motor is presented.

• Elastomers and Composites
• /
• v.53 no.4
• /
• pp.226-233
• /
• 2018

Elastomers based on the thermoplastics are widely used in rubber industries. Thermoplastic elastomers have the advantages of an easy shaping process and elimination of recycling problems. Thermoplastic polyester elastomer (TPE) is used for making rubber bands in wearable devices and its applications are increasing. In this study, five wrist bands were designed and their mechanical behaviors were examined by computer simulation, using hyper elastic models, Mooney-Rivlin and Ogden models, and a linear elastic model. Simulation results were compared and discussed in terms of band design and material model.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.6
• /
• pp.860-868
• /
• 2009

To provide adequate fit for women over a range of sizes, the grading process should reflect their body dimensions. Current methods of creating sized garments are not addressing the need for a good or even an adequate fit for the easy-order system. This study suggests a grading rule allocating system that can improve the appropriateness of clothing for uniform easy-order system. Also, the study proposes a bi-directional grading method subdivided to horizontal and vertical direction. The grading rule allocating system suggested the size increments which improve the fitness of uniform. Using the 5th Size Korea data, the crosstabulation was conducted with 1305 females in the age group $20{\sim}49$ years, and the size increments including $155\sim165$ of height section and $79\sim94$ of bust section, was selected for easy-order system. Also, the bi-directional grading method subdivided in horizontal and vertical direction was followed by factor analysis based on the circumference and height. And the grading rules were calculated by regression analysis.

• Journal of the Korean Society of Costume
• /
• v.21
• /
• pp.113-128
• /
• 1993

The textile designs expressed in contempor-ary fashion are studied in this paper. The dec-orative paintings have been encouraged to be-ing adapted in textile designs for apparel as a motif of the surface design to promote the ar-tistic atmosphere in it. Adopting paintings in textile design through the method of printing is valid to improve the fashion in several reasons as follow : First the printed paintings on the fabrics could be possible to contribute individuality and creativity to the fashion im-proving the quality of textile design and the taste of the consumer as well, Second the limitted types of the clothing construction for preparing the proper space to reveal a paintings is needed on the costume The simple clothing types of loose from the body or fitted to the body are easy to adopt and to recreat the paintings on the apparel. Third the paintings which have been favored in use for the textile design are mostly derived from the abstract arts rather than re-alistic paintings for its decorative traits. Fourth a proposal to adapt the other genre of the art could be encouraged to enrich the field of textile and fashion design. Fifth aquisition of the individuality and the creativity in fashion design to differenciate in international market could be obtained through the adaption of Korean paintings which is ap-preciated with Korean sentiment and mind. This would be one of the essential and advis-able ways for designers to solve the problems which have been consistently pusuing in the area of Korean industrial design to find the Korean design model.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.860-864
• /
• 2008

In modern society, people tend to spend their time on various types of chairs. However, it is not easy for a designer to design a comfortable chair, because satisfaction with the chair depends not only on the quantitative elements such as size, but also on the qualitative element such as the user's feeling. To deal with these problems, there have been many studies on designing an ergonomics chair. In this paper, the hapticaided design (HAD) system was adopted to design the ergonomics chair. Based on the HAD system, the designer can experience whether the chair is comfortable or not through the haptic device, and also can modify the design parameters instantaneously. The haptic chair capable of controlling the design parameters in real time was proposed as a haptic simulator. The controllable parameters such as the seat height, reclining angle, stiffness of the backrest, and so on were selected based on the previous researches related to ergonomics chairs. It will reduce the development cost and time by replacing the process of making the real mock-up and prototype with the haptic chair.

• Korean Institute of Interior Design Journal
• /
• v.23 no.4
• /
• pp.12-22
• /
• 2014

In this study, the basic information and study design characteristics of the Building Outer Wall Vertical Greening were analyzed. Recorded according to the type of research and analysis, through numerical statistics. Building Outer Wall Vertical Greening design the most appropriate and effective ways to present and try to guidelines. The scope of the research of Building Outer Wall Vertical Greening(2001-2013) was selected the most representative examples. Theory and statistical data analysis and case study research was conducted. The main academic monographs, Library Literature, specializing in design magazines and excerpts from the 28 cases analyzed specifically. Building Outer Wall Vertical Greening should be designed synthetically geographical features of the project, existing material, to consider the value of the building. Architect must be designed depending on accident and comprehensive expertise for architectural design of Building Outer Wall Vertical Greening. Building Outer Wall Vertical Greening requires the professional and comprehensive design approach depending on support of the government and people. However, purpose of use, plant, color, Formative expression, culture, locality, maintenance is properly applied in the design process is not easy.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.3
• /
• pp.157-169
• /
• 2002

In the initial stages of ship design, designers represent geometry, arrangement, and dimension of hull structures with 2D geometric primitives such as points, lines, arcs, and drawing symbols. However, these design information(‘2D geometric primitives’) defined in the drawing sheet require more intelligent translation processes by the designers in the next design stages. Thus, the loss of design semantics could be occurred and following design processes could be delayed. In the initial design stages, it is not easy to adopt commercial 3D CAD systems, which have been developed f3r being used in detail and production design stages, because the 3D CAD systems require detailed input for geometry definition. In this study, a semantic product model data structure was proposed, and an initial structural CAD system was developed based on the proposed data structure. Contents(‘product model data and design knowledges’) of the proposed data structure are filled with minimal input of the designers, and then 3D solid model and production material information can be automatically generated as occasion demands. Finally, the applicability of the proposed semantic product model data structure and the developed initial structural CAD system was verified through application to deadweight 300,000ton VLCC(Very Large Crude oil Carrier) product modeling procedure.

• Journal of the Korean housing association
• /
• v.14 no.4
• /
• pp.77-85
• /
• 2003

The facade design of apartment is getting more important, since residents'needs on raising the quality of housing have increased, and also public interests on urban landscape are higher than before. As a way of improving facade design the necessity of remodeling consequently has been risen. The government also relieves the regulations related to remodeling. A apartment facade design should address how to express both identities and aesthetic tastes of residents, so they want to reflect their own ideas and opinions on the apartment facade design during the remodeling process. It is not always easy, unfortunately, to reflect residents'ideas and opinions due to the public characteristics of apartment facades and absence of tools that support effective design participation. This paper proposes an internet-based collaborative design process that supports residents'active participation in the exterior remodeling process of apartment. We outline three main issues involved in developing the design system: 1) a semantic facade database built upon classification of building facades; 2) an Internet-based facade modeler based on a real-time, rule-based procedural modeling method; and finally 3) the virtual reality(VR) simulation that allows a group of designers and residents to design in a collaborative fashion.

• Journal of Ship and Ocean Technology
• /
• v.12 no.3
• /
• pp.1-13
• /
• 2008

In shipbuilding, diverse manufacturing techniques for automation have been developed and used in practice. Among them, however, the hull forming automation is the one that has not been of major concern compared with others such as welding and cutting. The basis of the development of this process is to find out how to extract thermal forming information. There exist various methods to obtain such information and the 3D design shape that needs to be formed should be extracted first for getting the necessary thermal forming information. Except well-established shipyards which operate 3D design systems, most of the shipyards only rely on 2.5D design systems and do not have an easy way to obtain 3D surface design data. So in this study, various shipbuilding design systems used by shipyards are investigated and a 3D design surface data extraction method is proposed from those design systems. Then an example is presented to show the extraction of real 3D surface data using the proposed method and computation of thermal forming information using the data.

• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.99-106
• /
• 2014

PURPOSES : This study is to develop Right-Turning Channelization Design Models of Semitrailer at Intersections by regression of vehicle tracking simulation. METHODS : Based on the literature review, it was indicated that right-turning channelization design guide of semitrailer is too complex and is not reflected turning speed and approach angle. To verify effectiveness of right turning semitrailer trajectories according to the changing turning speed and approach angle, vehicle tracking simulation was executed. And then, simulation results were analyzed for modeling design elements; minimum turning radius, swept path width, arc length, width of triangle island, of right-turning channelization using regression methods. RESULTS : When the turning speed is getting higher, minimum turning radius, arc length, width of triangle island increased and the approach angle lower, swept path width, arc length, width of triangle island reduced. The turning radius completely reflected by turning speed. CONCLUSIONS : In this research, it was investigated how much design elements are changed according to the turning speed and the approach angle of semitrailer. The developed right-turning channelization design models can help engineers to easy and comfortable design at various conditions.