• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.44-50
• /
• 2019

The underwater structures of landing pier are not easy to access and it is difficult to check the damage. Lately, typhoons and earthquakes have occurred frequently, which may cause damage to underwater structures of landing pier. In this study, to prevent collapse of underwater structures and to maintain systematically, the application method of FBG sensors and safety evaluation methods were studied. In order to confirm the application of the FBG sensor to the circular steel pipe used as a pile on the landing pier, we conducted laboratory tests and confirmed that the FBG sensor should be applied by welding. As a result of structural analysis of the landing pier structure, the optimal position of FBG sensor confirmed. The stresses on the dead load were calculated by structural analysis, the stresses on the live load were calculated by using the data obtained from the FBG sensor, and then the stress acting on the pile was calculated by adding the two stresses. The calculated stress was compared with the allowable stress to evaluate the safety of the pile. This study was carried out as a basic study to find a way to evaluate the safety of the landing pier in real time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.84-91
• /
• 2019

Recently, there has been a tendency to improve seismic performance of building structure by installing a steel hysteretic damping device which is economically efficient and easy to install and maintain. However, for a reinforced concrete building, a set of complicated connecting hardware and braces to fix the steel hysteretic damping device yields deteriorated reliability in damping performance. Therefore, this study presents a method of directly embedding a Kagome damper, which was investigated in previous researches, into a concrete structure without additional connecting hardware. Moreover, in this study, a series of experiments conducted to provide a basis of the Kagome damper by confirming the seismic behavior for various embedded lengths. As a result, in a group of the embedded length of $1.0l_d$, the dampers were pulled out, while concrete breakout occurs. In a group of $2.0l_d$, neither pull-out nor concrete breakout occurred, while the dampers show stable behavior. Moreover, the buried length of $2.0l_d$ has 1.3 times better energy dissipation capacity. The system presented in this study can reduce the cost and period for installing, omitting making additional hardware.

• The Korean Journal of Archival Studies
• /
• no.38
• /
• pp.3-35
• /
• 2013

The physical access or control of records with material entities is relatively easy. However, in the case of electronic records, due to its heightened applicative aspect that allows anyone with the authority to have access over the data, it requires an appropriate standard and stability to ensure the authenticity and integrity of electronic records. This study performed functional evaluation by extracting the minimum critical items from the national functional requirements documents and standards to explore the access control function that play an important role for the standard records management system to maintain quality requirements of electronic records. Based on this checklist, it evaluates whether the standard records management system properly carries out the access control function and investigates the current condition of application to practical records management work. Records managers generally do not use access control function, which may be because they do not feel the necessity, since the application of records management system is not yet actively promoted. In order for the standard records management system to be developed to become a more active system, it requires system improvement as well as considerations for below factors: First, although the necessity of establishing access control conditions is already recognized, it requires a clear stipulation of the regulation. Second, measures must be taken to implement access control in the records management system through document security solution. Third, it requires self-reflection of records manager, who utilizes the records management system. Instead of placing all responsibility on the National Archives, which established the system, professionals must further develop the system through continuous evaluation and improvement. Finally, a general discussion is required to publicize the issue of functional improvement of records management system. Although there is a bulletin board already created for this purpose, its users are extremely limited and it only deals with current problems. A space in online as well as in offline is required to solve the fundamental problems and exchange opinions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.558-565
• /
• 2021

The Republic of Korea Navy has deployed naval fleets in the East, West, and South seas to effectively respond to threats from North Korea and its neighbors. However, it is difficult to allocate proper missions due to high uncertainties, such as the year of introduction for the ship, the number of mission days completed, arms capabilities, crew shift times, and the failure rate of the ship. For this reason, there is an increasing proportion of expenses, or mission alerts with high fatigue in the number of workers and traps. In this paper, we present a simulation model that can optimize the assignment of naval vessels' missions by using a continuous time absorbing Markov chain that is easy to model and that can analyze complex phenomena with varying event rates over time. A numerical analysis model allows us to determine the optimal mission durations and warship quantities to maintain the target operating rates, and we find that allocating optimal warships for each mission reduces unnecessary alerts and reduces crew fatigue and failures. This model is significant in that it can be expanded to various fields, not only for assignment of duties but also for calculation of appropriate requirements and for inventory analysis.

• The Journal of Industrial Distribution & Business
• /
• v.13 no.6
• /
• pp.39-49
• /
• 2022

Purpose: As part of these efforts, in-depth research is needed on efficient and practical utilization of underground spaces and underground shopping malls. In addition, efforts are being made to find effective alternatives to various problems currently occurring in underground shopping malls, but it is not easy. In addition, the development entity and the maintenance entity are different from each other, and the management is not unified, making it difficult to maintain underground shopping malls. From this point of view, it can be said that it is time to actively and specifically discuss ways to revitalize underground shopping malls. Data and methodology: In the domestic distribution environment, traditional markets and shops are stagnating due to rapid changes in consumption patterns, such as the spread of large companies with advanced distribution techniques such as hypermarkets, shopping malls, and SCM, the rapid increase in Internet and home shopping, and the importance of convenience for young consumers. In order to revitalize underground shopping malls, it is necessary to strengthen the organization and self-rescue efforts of merchants' associations, change consciousness through merchant education, change to specialized markets, find nuclear stores and representative restaurants, and support the hardware sector. Results: The connection of underground shopping malls in each region of the country, where commercial districts are separated from each other, will also play an important role in reviving the function of the city in the future. To do this, it is first necessary to connect underground shopping malls that have been cut off. In other words, connection between connectable underground shopping malls should be promoted. Of course, long-term projects should be promoted step by step, and many consultations should be made on how to connect with the ground for each local government. Conclusion: This is because in the future, the underground space cannot just be a walking place, but another space of the Korean Wave where you can experience satisfying the five senses. K-shopping Hallyu content can be created by creating a characteristic story for each underground shopping mall in the city, permanently this story-oriented event, and creating a safe and elegant environment. If there is a story, so-called "Senomi Shopping" will be possible. A new Korean Wave will be created that can satisfy "the fun of writing, the fun of seeing, and the fun of feeling" at the same time.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.644-650
• /
• 2022

Aralia elata (Miq.) SEEM is a deciduous shrub that has attracted attention as a high-income forest product. To improve the efficiency of cultivation and increase income, productivity according to the pruning period and annual pruning after harvesting Aralia elata shoots was analyzed. The optimal time was determined by pruning five times at 2-week intervals from 6 days after shoot harvesting. To investigate the pruning effect, pruning was performed at 30 cm from the ground in the first year after planting. From the second year after planting, branches grown for 1 year were pruned to 10 cm, and the annual shoots and branches were compared. Thenumber of first pruned branches after 6 days was 1.3-2.1 times higher after shoot harvesting than at other times, and the shoot characteristics were 1.2-1.7 times better than those at other periods. The faster the pruning, the better the quality of the harvested shoots. Annual pruning produced high-quality shoots (approximately 1.5 cm in diameter and 16 cm in length) from the second year after planting, and it was possible to increase productivity by inducing generation of branches capable of harvesting shoots. Annual pruning also made it possible to maintain easy shoot harvesting at approximately150 cm. These results showed that it was efficient to perform Aralia elatapruning as early as approximately 6 days after shoot harvesting. Pruning enabled production ofuniform-quality shoots every year and increasedthe yield of the trees.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.30-31
• /
• 2009

Early detection of schedule delay in field construction activities is vital to project management. It provides the opportunity to initiate remedial actions and increases the chance of controlling such overruns or minimizing their impacts. This entails project managers to design, implement, and maintain a systematic approach for progress monitoring to promptly identify, process and communicate discrepancies between actual and as-planned performances as early as possible. Despite importance, systematic implementation of progress monitoring is challenging: (1) Current progress monitoring is time-consuming as it needs extensive as-planned and as-built data collection; (2) The excessive amount of work required to be performed may cause human-errors and reduce the quality of manually collected data and since only an approximate visual inspection is usually performed, makes the collected data subjective; (3) Existing methods of progress monitoring are also non-systematic and may also create a time-lag between the time progress is reported and the time progress is actually accomplished; (4) Progress reports are visually complex, and do not reflect spatial aspects of construction; and (5) Current reporting methods increase the time required to describe and explain progress in coordination meetings and in turn could delay the decision making process. In summary, with current methods, it may be not be easy to understand the progress situation clearly and quickly. To overcome such inefficiencies, this research focuses on exploring application of unsorted daily progress photograph logs - available on any construction site - as well as IFC-based 4D models for progress monitoring. Our approach is based on computing, from the images themselves, the photographer's locations and orientations, along with a sparse 3D geometric representation of the as-built scene using daily progress photographs and superimposition of the reconstructed scene over the as-planned 4D model. Within such an environment, progress photographs are registered in the virtual as-planned environment, allowing a large unstructured collection of daily construction images to be interactively explored. In addition, sparse reconstructed scenes superimposed over 4D models allow site images to be geo-registered with the as-planned components and consequently, a location-based image processing technique to be implemented and progress data to be extracted automatically. The result of progress comparison study between as-planned and as-built performances can subsequently be visualized in the D4AR - 4D Augmented Reality - environment using a traffic light metaphor. In such an environment, project participants would be able to: 1) use the 4D as-planned model as a baseline for progress monitoring, compare it to daily construction photographs and study workspace logistics; 2) interactively and remotely explore registered construction photographs in a 3D environment; 3) analyze registered images and quantify as-built progress; 4) measure discrepancies between as-planned and as-built performances; and 5) visually represent progress discrepancies through superimposition of 4D as-planned models over progress photographs, make control decisions and effectively communicate those with project participants. We present our preliminary results on two ongoing construction projects and discuss implementation, perceived benefits and future potential enhancement of this new technology in construction, in all fronts of automatic data collection, processing and communication.

• Korean Journal of Environmental Biology
• /
• v.32 no.1
• /
• pp.58-67
• /
• 2014

The outdoor mass cultivation is not possible for microalgae in Korea all year round, due to cold winter season. It is not easy to maintain proper level of productivity of microalgae even in winter. To prevent a drastic decrease of temperature in a greenhouse, two layers were covered additionally, inside the original plastic layer of the greenhouse. The middle layer was made up of plastic and the inner layer, of non-woven fabric. Acrylic transparent bioreactors were constructed to get more sunlight, not only from the upper side but also from the lateral and bottom directions. In winter at freezing temperatures, six different culture conditions were compared in the triply covered, insulated greenhouse. Wastewater after anaerobic digestion was used for the cultivation of microalgae to minimize the production cost. Water temperature in the bioreactors remained above $10^{\circ}C$ on average, even without any external heating system, proving that the triple-layered greenhouse is effective in keeping heat. Algal biomass reached to 0.37g $L^{-1}$ with the highest temperature, in the experimental group of light-reflection board at the bottom, with nitrogen and phosphorus removal rate of 92% and 99%, respectively. When fatty acid composition was analyzed using gas-chromatography, linoleate (C18 : 3n3) occupied the highest proportion up to 61%, in the all experiment groups. Chemical oxygen demand (COD), however, did not decrease during the cultivation, but rather increased. Although the algal biomass productivity was not comparable to warm seasons, it was possible to maintain water temperature for algae cultivation even in the coldest season, at the minimum cost.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.2
• /
• pp.121-128
• /
• 2008

As an aquatic ecotoxicity test method, a bioassay using the inhibition of sporualtion of the green macroalga, Ulva pertusa, has been developed. Optimal test conditions determined for photon irradiance, pH, salinity and temperature were $100\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, $7{\sim}9$, $25{\sim}35\;psu$ and $15{\sim}20^{\circ}C$, respectively. The validity of the test endpoint was evaluated by assessing the toxicity of four metals (Cd, Cu, Pb, Zn) and elutriates of sewage or waste sludge collected from 9 different locations. When the metals were assayed, the $EC_{50}$ values indicated the following toxicity rankings: Cu ($0.062\;mg{\cdot}L^{-1}$) > Cd ($0.208\;mg{\cdot}L^{-1}$) > Pb ($0.718\;mg{\cdot}L^{-1}$) > Zn ($0.776\;mg{\cdot}L^{-1}$). When compared with other commonly used bioassays of metal pollution listed on US ECOTOX database, the sporualtion test proved to be the most sensitive. Ulva sporulation was significantly inhibited in all elutriates with the greatest and least effects observed in elutriates of sludge from industrial waste ($EC_{50}=6.78%$) and filtration bed ($EC_{50}=15.0%$), respectively. The results of the Spearman rank correlation analysis for $EC_{50}$ data versus the concentrations of toxicants in the sludge presented a significant correlation between toxicity and four heavy metals(Cd, Cu, Pb, Zn). The method described here is sensitive to toxicants, simple to use, easy to interpret and economical. It is also easy to procure samples and maintain cultures. The present method would therefore probably make a useful assessment of aquatic toxicity of a wide range of toxicants. In addition, the genus Ulva has a wide geographical distribution and species have similar reproductive processes, so the test method would have a potential application worldwide.

• Asia Marketing Journal
• /
• v.12 no.2
• /
• pp.155-175
• /
• 2010

Most of the service industries including finance and telecommunications have become matured and saturated. The competitions have become severe while the differences among brands become smaller. Therefore maintaining good relationships with customers has been critical for the service providers. In case of credit card and debit card, the similar patterns are shown. It is important for them to maintain good relationships with customers, and therefore, they have used marketing program which provides customized services to customers and utilizes the membership programs. Not only do they build and maintain good relationships, but also highlight their brands from the emotional aspects. For example, KB Card or Hyundai Card uses well-known designers' works for their credit card design. As well, they differentiate the designs of credit cards to stress on their brand personalities. BC Card introduced the credit card with perfume that a customer would like. Even though the credit card is small and not shown to public easily, it becomes more important for those companies to touch the customers' feelings with the brand personalities and their images. This is partly because of changes in consumers' lifestyles. Y-generations becomes highly likely to express themselves in many different ways and more emotional than X-generations. For the Y-generations, therefore, even credit cards in the wallet should be personalized and well-designed. In line with it, credit cards with good design can be seen as an example of brand identity, where different design for each customer can be used to recognize the membership groups that customers want to belong. On the other hand, these credit card companies offer the special treatment benefits for those customers who are heavy users for the cards. For example, those customers who love sports will receive some special discounts when they use their credit cards for sports related products. Therefore this study attempted to explore the relationships between relational benefits, brand identification and loyalty. It has been well known that relational benefits and brand identification lead to loyalty independently from many other studies, but there has been few study to review all the three variables all together in a research model. Furthermore, as reviewed above, in the card industry, many companies attempt to associate the brand image with their products to fit their customers' lifestyles while relational benefits are still playing an important role for their business. Therefore in our research model, relational benefits, brand identification, and loyalty are all included. We focus on the mediating effect of brand identification. From the relational benefits perspective, only special treatment benefit and confidence benefit are included. Social benefit is not applicable for this credit card industry because not many cases of face-to-face interaction can be found. From the brand identification perspective, personal brand identity and social brand identity are reviewed and included in the model. Overall, the research model emphasizes that the relationships between relational benefits and loyalty will be mediated by the effect of brand identification. The effects of relational benefits which are confidence benefit and special treatment benefits on loyalty will be realized when they fit to the personal brand identity and social brand identity. In the research model, therefore, the relationships between confidence benefit and social brand identity, and between confidence benefit and personal identity are hypothesized while the effects of special treatment benefit on social brand identity and personal brand identity are hypothesized. Loyalty, then, is hypothesized to have positive relationships with personal brand identity and social brand identity. In addition, confidence benefit among the relational benefits is expected to have a direct, positive relationship with loyalty because confidence benefit has been recognized as a critical factor for good relationships and satisfaction. Data were collected from college students who have been using either credit cards or debit cards. College students were regarded good subjects because they are in Y-generation cohorts and have tendency to express themselves more. Total sample size was two hundred three at the beginning, but after deleting those data with many missing values, one hundred ninety-seven data points were remained and used for the model testing. Measurement items were brought from the previous literatures and modified for this research. To test the reliability, using SPSS 14, chronbach's α was examined and all the values were from .874 to .928 exceeding over .7. Using AMOS 7.0, confirmatory factor analysis was conducted to investigate the measurement model. The measurement model was found good fit with χ²(67)=188.388 (p= .000), GFI=.886, AGFI=.821, CFI=.941, RMSEA=.096. Using AMOS 7.0, structural equation modeling has been used to analyze the research model. Overall, the research model fit were χ²(68)=188.670 (p= .000), GFI=.886, AGFI=,824 CFI=.942, RMSEA=.095 indicating good fit. In details, all the paths hypothesized in the research model were found significant except for the path from social brand identity to loyalty. Personal brand identity leads to loyalty while both confidence benefit and special treatment benefit have a positive relationships with personal and social identities. As well, confidence benefit has a direct positive effect on loyalty. The results indicates the followings. First, personal brand identity plays an important role for credit/debit card usage. Therefore even for the products which are not shown to public easy, design and emotional aspect can be important to fit the customers' lifestyles. Second, confidence benefit and special treatment benefit have a positive effects on personal brand identity. Therefore it will be needed for marketers to associate the special treatment and trust and confidence benefits with personal image, personality and personal identity. Third, this study found again the importance of confidence and trust. However interestingly enough, social brand identity was not found to be significantly related to loyalty. It can be explained that the main sample of this study consists of college students. Those strategies to facilitate social brand identity are focused on high social status groups while college students have not been established their status yet.