• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.418-424
• /
• 2014

A large number of wire rope has been used in various industries such as cranes and elevators. When wire used for a long time, wire defects occur such as disconnection and wear. It leads to an accident and damage to life and property. To prevent this accident, we proposed a wire rope fault detection system in this paper. We constructed the whole system choosing the leakage fault detection method using hall sensors and the method is simple and easy maintenance characteristics. Fault diagnosis and analysis were available through analog filter and amplification process. The amplified signal is transmitted to the computer through the data acquisition system. This signal could be obtained improved results through the digital filter process.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.307-315
• /
• 1993

A direct draft measurement system was developed based on the swingle tree- the rear component of the single-animal harnessing (or yoking) system . The prototype was made from a tube, on which four strain gages were attached. The pull of the draft animal through the flexible pull chains or ropes causes the beam to bend, The bending strain is sensed by the strain gages and the bridge converts this to a voltage signal. Counterweights keep the tube correctly oriented if the angle of pull changes , while end bearing follow the variations in the angle of pull. Hence, the voltage output is proportional to the draft. the device has highly linear response, acceptable sensitivity negligible error and hysteresis. It is suitable for electronic data acquisition, non-intrusive , easy to attach and detach and is reasonably priced.

• Journal of Biomedical Engineering Research
• /
• v.10 no.3
• /
• pp.229-236
• /
• 1989

This paper describes an idea of design and construction for a radial pulse wave detector, In acquiring arterial pulse signal noninvasively, a new combinational fiber-optic transducer was used which has a detecting part and a sensing part. The mechanism of detecting part is composed of special form of structure that can detect changing pulses in contact with skin, and transmits arterial wall movements to the sensing part. It consists of elastic reflector and optical fibers, which are arranged in a fiber pair. Then, the intensity of the reflected light will be proportional to the displacement changed by inclined reflector. Using this transducer, it expected to make a clinically useful tool for arterial pulse wave diagnosis, especially on the application of "MACK- CHIN" in the field of Korean traditional medicine, since : his transducer has a simple structure and has an easy and clear signal acquisition method.on method.

• Journal of Environmental Science International
• /
• v.20 no.2
• /
• pp.199-205
• /
• 2011

This study used to the satellite photograph and drew up a flood inundation map. To past used digital map and showed reflect the inundation map and change of the city was difficult. The acquisition of the satellite photograph is easy from internet Site of Korea and is updated quickly. So, used the satellite photograph from flood inundation drawing up of existing and reflected the change of the city. Drawing up method of the inundation map in compliance with the research which sees the reflection of the land use which is actual is possible. Results of HEC-RAS with depth and an inundation location to be show easily. But there is to a combination method of the satellite photographs and GIS data and more objective and the subject the development of the technique which has reached fixed quantity must be researched continuously judges.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.430-433
• /
• 2003

Air-operated valve is one of principal valves that are using to control fluid flow. A period diagnosis for safety of power plants is necessary. But there are many difficulties such as economic loss caused by intone of high cost devices and a matter hard to deal with users. In this study we developed the diagnosis system that usersofpower plants are easy to handle. The diagnosis system is composed of database module, reliability analysis module, design safety nodule and diagnosis test and evaluation module.

• The Magazine of the IEIE
• /
• v.23 no.3
• /
• pp.83-93
• /
• 1996

Picture archiving and communications systems(PACS) for digital image distribution, archiving and transmission, represent the modern hospital. PACS is the medical image management system within a hospital, whereas teleradiology system is the medical image communication system between remote sites. PACS and teleradiology systems usually consists of mainly four parts such as image acquisition part, image storage and database part, Image communication network part, and image display workstation part. Among these components comprised In the PACS, workstations are the point of contact between a PACS and the radiologist or referring physician. Therefore, the acceptance of PACS is highly dependent on workstation functionality, performance and easy of use compared with the conventional film-based radiology. This paper describes overall configurations and some requirements of PACS and teleradiology.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.707-708
• /
• 2015

This paper proposes a method for improving efficiency of high-voltage motors off-line insulation diagnostic test. The conventional manual test method has measurement errors and excessive processing time. We developed the KITAS system and solved these problems by using the instrument remote control and communication technology. The result of proficiency testing by interlaboratory comparisons using Power Factor Tip-Up test was '${\mid}E_n{\mid}$ < 1'. It was possible to confirm the validity of acquired data from the KITAS and establish a remote diagnostic system for easy access without physical limitations.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.228-232
• /
• 2002

This paper is reporting the whole process of developing a weight measuring scaler of truck and trailer system for static and dynamic condition. The sensors attached on the top of springs each wheels. Acquisition and data processing performs accurate data extraction from noise environment, filtering and estimation. Weight information was highly distorted with noise and perturbation. Hence the perturbation was classified several categories and evaluated for accurate signal extract. The final products supply accurate and easy readable data of load weight for truck. It supplies total weight as well as loading condition of each axle. It is expected that it give the information to the truck operator of proper amount loading and safe condition to drive with it.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1081-1089
• /
• 1996

In Korean agriculture, an automatic environment control system for greenhouse is essential to save labor and to increase the quality of products. The existing environment monitoring systems have weighed on greenhouse growers and researchers because of their high cost and difficult applications. Many sensors are widely used for monitoring the greenhouse environment, but most of commercial sensors are expensive and not suitable for use in greenhouses. Thus , the development of an environment monitoring system for exclusive use in greenhouses is essential . The objective of this study was to develop modular environment monitoring systems, which are low-cost , reliable and easy -to -use. The results showed that the sensors for indoor and outdoor environments and nutrient solution had the ranges and accuracies appropriate for use in greenhouses. Also the modular environment systems developed showed a satisfactory performance in terms of stability and reliability in the measurement and acquisition of the greenhouse environment data.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.584-586
• /
• 2007

3D virtual modeling such as creation of a cyber city or landscape, or making a 3D GIS requires realistic textures. Automatic texture extraction using close range images is not yet efficient or easy in terms of data acquisition and processing. In this paper, common problems associated with automatic texture extraction from aerial photographs are explored. The ZI-buffer, which has depth and facet ID fields, is proposed to remove hidden pixels. The ZI-buffer algorithm reduces memory burden and identifies visible facets. The correct spatial resolution for facet gridding is tested. Error pixels in the visibility map were removed by filtering.