• Korean Journal of Animal Reproduction
• /
• v.7 no.1
• /
• pp.19-23
• /
• 1983

Present studies were conducted to investigate the developmental stage and the location of embryos in the reproductive tract at various times after ovulation, the morphologically normal after thawing of embryos preserved in liquid nitrogen, and the survival after transferring frozen-thawed embryos. The results obtained were as follows: 1. Embryo stage and location in the reproductive tract after hCG administration. For the investigation of embryo stage and location in the reproductive tract after ovulation, rabbits were laparotomized at 24, 40, 48, 72 and 120 hrs post hCG injection, simultaneously with mating. the oviducts and uteri were flushed out with PBS medium containing 50% rabbit serum, respectively. 1) Most of embryos was remained in the oviduct within 48 hrs, with the lapse of time, embryos were started to move to uterus and shifted in uterus at 72 hrs after hCG injection. 2) The representatives of embryos stage collected at 24, 40, 48, 72 and 120 hrs were 1-cell(60.4%), 8-cell to early morula (52.3, 39.3%), late blastocyst (95.5%) stages, respectively. 2. Morphological normality and survival of the frozen-thawed embryos. For the evalution of the quality and viability on the frozen-thawed embryos, immediately after thawing, embryos were assessed by morphologically normal under a dissecting microscope, and a further test of frozen-thawed embryos was made by transferring the morphologically normal embryos to the uteri of recipient rabbit induced pseudopregnancy by the injection of hCG at the time of hCG injection in donor rabbits. 1) The propotions of embryos which a, pp.ared morphologically normal was higher when 8-cell (85.7%) and morula(90.5%) were used for freezing than when 4-cell (66.7%) and blastocyst (75.8%) were used. 2) Preganacies were observed at Day 15 after transfer of frozen-thawed 8-cell (7/13), morula (19/42) and blastocyst (3/19) but not after transfer of embryos at 4-cell stage.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.28 no.1
• /
• pp.32-37
• /
• 2017

Background and Objectives : This study evaluated the efficacy of combination therapy of proton pump inhibitor (PPI) and steroid inhaler (SI), with or without botulinum toxin injection (BTX) for contact granuloma. Subjects and Methods : Fourteen contact granuloma patients were enrolled in this study. Combination therapy of PPI and SI were used for the first line treatment. When combination therapy was not effective, BTX was performed as the second method. Treatment results were recorded as responsible or non-responsible. Farwell grade, size, history of voice abuse, gender, and reflux finding score (RFS) were compared between responsible group and non-responsible group. Results : Initial response rate was 28.6% after treatment of PPI and SI. BTX was performed on three un-responsible patients. After BTX injection, three patients had complete remission of granuloma. Final response rate was 50.0%. Un-responsible group had significantly higher RFS than responsible group. Conclusion : The efficacy of PPI and SI was limited for contact granuloma in this study. Botulium toxin injection was recommended in early phase when PPI and SI did not effective for contact granuloma. Prospective studies evaluating the effects of PPI and SI are warranted.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.105-113
• /
• 2009

The performance of a direct-injection type diesel engine often depends on the strength of swirl or squish, shape of combustion chamber, the number of nozzle holes, etc. This is of course because the combustion in the cylinder was affected by the mixture formation process. In this paper, combustion process of biodiesel fuel was studied by employing the piston which has several grooves with inclined plane on the piston crown to generate swirl during the compression stroke in the cylinder in order to improve the atomization of high viscosity fuel such as biodiesel fuel and toroidal type piston generally used in high speed diesel engine. To take a photograph of flame, single cylinder, four stroke diesel engine was remodeled into two stroke visible engine and high speed video camera was used. The results obtained are summarized as follows; (1) In the case of toroidal piston, when biodiesel fuel was supplied to plunger type injection system which has very low injection pressure as compared with common-rail injection system, the flame propagation speed was slowed and the maximum combustion pressure became lower. These phenomena became further aggravated as the fuel viscosity gets higher. (2) In the case of swirl groove piston, early stage of combustion such as rapid ignition timing and flame propagation was activated by intensifying the air flow in the cylinder. (3) Combustion process of biodiesel fuel was improved by the reason mentioned in paragraph (2) above. Consequently, the swirl grooves would also function to improve the combustion of high viscosity fuel.

• The Korean Journal of Pharmacology
• /
• v.32 no.2
• /
• pp.259-267
• /
• 1996

In an attempt to dofine the early biochemical determinants that participate in the pathogenesis of glycerol-induced nephrotoxicity, especially focusing on oxygen free radicals and $N-acetyl-{\beta}-D-glucosaminidase$ (NAG) activity, we studied 24-hours urine outflow, 24-hours urinary protein excretion and urinary NAG activity after the injection of glycerol and also we studied malondialdehyde(MDA) level and superoxide dismutase(SOD) activity in the kidney of rats at 24hr after the injection of glycerol. Sprague-Dawley albino rats weighing 240 to 260 gm were injected intramuscularly with a 50% solution of glycerol(2ml/kg, 4ml/kg and 8ml/kg). The group treated with glycerol showed significantly lower urine outflow level and urinary protein excretion level and higher urinary NAG activity after the injection as compared to those of control group. Also the group treated with glycerol showed significantly higher MDA level and lower SOD activity at 24hr after the injection as compared to those of control group. These results suggest that the excessive oxygen free radicals resulting from the depression of SOD activity is an important determinant in the pathogenesis of glycerol-induced nephrotoxicity and higher urinary NAG activity is an index of renal tubular cell damage in the glycerol-induced nephrotoxicity.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.64-70
• /
• 2007

Raising exhaust gas temperature during cold-start period is very crucial to improve emission performance of SI engines because it enhances the performance of catalyst in the early stage of engine start. In this study, control variables such as ignition timing, idle speed actuator(ISA) opening and fuel injection duration were extensively investigated to analyze variations in exhaust gas temperature and engine stability during cranking period. Experimental results showed that spark timing affected engine stability and exhaust gas temperature but the effects were small. On the other hand, shortened injection duration and increased ISA opening led to a significant increase in exhaust gas temperature. Under such conditions, increase in cranking time was also observed, showing that it becomes harder to start the engine. Based on these observations, a pseudo fuel-air ratio, defined as a ratio of fuel injection time to degree of ISA opening, was introduced to analyze the experimental results. In general, decrease in pseudo fuel-air ratio raised exhaust gas temperature with the cost of stable and fast cranking. On the contrary, an optimal range of the pseudo fuel-air ratio was found to be between 0.3 to 0.5 where higher exhaust gas temperatures can be obtained without sacrificing the engine stability.

• Journal of ILASS-Korea
• /
• v.23 no.4
• /
• pp.192-204
• /
• 2018

In this study, a 3D CFD analysis method for the combustion process was established for a low calorific value syngas-diesel dual-fuel engine operating under very lean fuel-air mixture condition. Also, the accuracy of computational analysis was evaluated by comparing the experimental results with the computed ones. To simulate the combustion for the dual-fuel engine, a new dual-fuel chemical kinetics set was used that was constituted by merging two verified chemical kinetic sets: n-heptane (173 species) for diesel and Gri-mech 3.0 (53 species) for syngas. For dual-fuel mode operations, the early stage of combustion was dominated by the fuel burning inside or near the spray plume. After which, the flame propagated into the syngas in the piston bowl and then proceeded toward the syngas in the squish zone. With the baseline injection system and piston shape, a significant amount of unburned syngas was discharged. To solve this problem, effects of the injection parameters and piston shape on combustion characteristics were analyzed by calculation. The change in injection variables toward increasing the spray plume volume or the penetration length were effective to cause fast burning in the vicinity of TDC by widening the spatial distribution of diesel acting as a seed of auto-ignition. As a result, the unburned syngas fraction was reduced. Changing the piston shape with the shallow depth of the piston bowl and 20% squish area ratio had a significant effect on the combustion pattern and lessened the unburned syngas fraction by half.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.120-129
• /
• 1995

Since the rate and completeness of combustion in direct injection engines were controlled by the characteristics of gas flow fields and sprays, an understanding of those was essential to the design of the direct injection engines. In this study the numerical simulations of swirl effects on the characteristics of gas flow fields and sprays were performed using the spray model that could predict the interactions between gas fields and spray droplets. The governing equations were discretized by the finite volume method and the modified k- e model which included the compressibility effects due to the compression/expansion of piston was used. The results of numerical calculation of the spray characteristics in the quiescent environment were compared with the experimental data. There were good agreements between the results of calculation and the experimental data, except in the early stages of spray. In the motoring condition, the results showed that a substantial air entrainment into the spray volume was emerged and hence the squish motion was relatively unimportant during fuel injection periods. As the swirl ratio increased, the evaporation rate was increased due to the wide dispersion of the spray droplets and the strong interaction between spray droplets and gas fields.

• Journal of Veterinary Science
• /
• v.19 no.6
• /
• pp.788-797
• /
• 2018

In many countries, vaccines are used for the prevention of foot-and-mouth disease (FMD). However, because there is no protection against FMD immediately after vaccination, research and development on antiviral agents is being conducted to induce protection until immunological competence is produced. This study tested whether well-known chemicals used as RNA virus treatment agents had inhibitory effects on FMD viruses (FMDVs) and demonstrated that ribavirin showed antiviral effects against FMDV in vitro/in vivo. In addition, it was observed that combining the administration of the antiviral agents orally and complementary therapy with vaccines synergistically enhanced antiviral activity and preserved the survival rate and body weight in the experimental animals. Antiviral agents mixed with an adjuvant were inoculated intramuscularly along with the vaccines, thereby inhibiting virus replication after injection and verifying that it was possible to induce early protection against viral infection prior to immunity being achieved through the vaccine. Finally, pigs treated with antiviral agents and vaccines showed no clinical signs and had low virus excretion. Based on these results, it is expected that this combined approach could be a therapeutic and preventive treatment for early protection against FMD.

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.10-18
• /
• 2021

CO₂ storage technology in an aquifer is one of the most effective way to decrease global warming due to a high storage capacity and economics. A demonstration-scale offshore CO₂ storage project was performed in a geological deep aquifer in the Pohang Basin, Korea for a technological development of large-scale CO₂ storage. A challenging issue in the early design stage of the project was to establish the proper injectivity during CO₂ injection. To solve this issue, injection conditions were calculated by calculating injection rate, pressure, temperature, CO₂ phase change, and thermodynamic properties. For this study, we simulated and numerically analyzed CO₂ phase change from gas to supercritical phase and flow behavior in transport piping and injection tubing using OLGA program. Our results provide the injectivity conditions of CO₂ injection system combined with a bottomhole pressure of an aquifer.

• Clinical and Experimental Reproductive Medicine
• /
• v.20 no.1
• /
• pp.31-36
• /
• 1993

The effects of freezing and 1,2-propanediol on early and late pronucleate stage mouse ova were investigated in terms of survival after thawing and development in vitro. The samples were divided into two groups according to different age in pronucleate ova: ova in(1) early pronuclear stage with two distant pronuclei at 18h after hCG injection, and (2) late pronuclear stage with adjacent pronuclei at 30h. Zygotes in the late pronuclear stage have been proven to be more resistant to 1,2-propanediol, showing a significantly higher developmental rate than zygotes in early stage (80.3 versus 66.3%, <0.05), but survival rate was similar in the two groups (91.0 versus 93.5%). After freezing and thawing, survival and developmental rates were decreased in both groups when compared to the control group (54.3 versus 92.3%, 47.7 versus 73.3%. respectively). And developmental rate in the late pronuclear stage zygotes showed significantly higher than in early (55.4 versus 40.0%) after thawing. In conclusion, early pronucleate mouse ova have a lower developmental capacity in vitro and a lower survival rate after freezing and thawing than late ova. These findings suggest that the timing of freezing could be important for survival and further development in vitro in cryopreservation of human pronucleate ova.