• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.271-279
• /
• 2015

Induction cooking application with multiple loads need high power inverters and appropriate control techniques. This paper proposes an inverter configuration with buck-boost converter for multiple load induction cooking application with independent control of each load. It uses one half-bridge for each load. For a given dc supply of $V_{DC}$, one more $V_{DC}$ is derived using buck-boost converter giving $2V_{DC}$ as the input to each half-bridge inverter. Series resonant loads are connected between the centre point of $2V_{DC}$ and each half-bridge. The output voltage across each load is like that of a full-bridge inverter. In the proposed configuration, half of the output power is supplied to each load directly from the source and remaining half of the output power is supplied to each load through buck-boost converter. With buck-boost converter, each half-bridge inverter output power is increased to a full-bridge inverter output power level. Each half-bridge is operated with constant and same switching frequency with asymmetrical duty cycle (ADC) control technique. By ADC, output power of each load is independently controlled. This configuration also offers reduced component count. The proposed inverter configuration is simulated and experimentally verified with two loads. Simulation and experimental results are in good agreement. This configuration can be extended to multiple loads.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.222-224
• /
• 2002

In proton and heavy ion radiotherapy, compensators are required to modify the energy of heavy ion, to compensate the local difference of tumor depth. Conventional compensators have to be created, exchanged, and stored for each patient and for each irradiation directions. A Cylinder Type Liquid Variable Compensator is and is under development. Hexagonal cylinders will be arranged in honeycomb structure. In which air and fluid are divided by hexagonal pistons. The position of each piston will be changed in each cylinder for adjusting the thickness of fluid for variable compensator. The location of each hexagonal piston is determined by each controlling cylinder connected to the hexagonal cylinder by inlet pipes of fluid. Each controlling cylinder includes controlling a piston, which is moved mechanically. Each controlling cylinder is to be moved by a motor driven by a computer.

• Korean Journal of Plant Resources
• /
• v.6 no.2
• /
• pp.99-124
• /
• 1993

Plant in chollabuk-do have investded 105 family, 442 species. 2. The order of distribution of the most family was the Compositae 43, Leguminosae Gramineae each 28, Rosaceae 17, Liliaceas 22, Labiatae 17, Ranunculaceae 12, Betulaceae 11, Violaceae 10, Polygonaceae Aspidiaceae each 9, Cruciferae${\cdot}$Caryothyllaceae${\cdot}$Celastraceae each 8, Fagaceae, Rubiaceae each 6, Ulmaceae 5. 3. Medical plants have invested 56 family, 116 species. 4. The order of the most family was the Compositae 8, Liliaceae Rosaceae${\cdot}$Umbelliferae${\cdot}$Labiatae each 6, Leguminosae${\cdot}$Rutaceae each 5, Campanulaceae${\cdot}$Ranunculaceae each 3, Simaroubaceae${\cdot}$Euphorbiaceae${\cdot}$Araliaceae each 2, Scrophulariaceae${\cdot}$Plantaginaceae each 1.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.3
• /
• pp.207-215
• /
• 1993

In order to statistically predict $O_3$ levels in Seoul, the study used the TMS (telemeted air monitoring system) data from the Department of Environment, which have monitored at 20 sites in 1989 and 1990. Each data in each site was characterized by 6 major criteria pollutants ($SO_2, TSP, CO, NO_2, THC, and O_3$) and 2 meteorological parameters, such as wind speed and wind direction. To select proper variables and to determine each pollutant's behavior, univariate statistical analyses were extensively studied in the beginning, and then various applied statistical techniques like cluster analysis, regression analysis, and expert system have been intensively examined. For the initial study of high level $O_3$ prediction, the raw data set in each site was separated into 2 group based on 60 ppb $O_3$ level. A hierarchical cluster analysis was applied to classify the group based on 60 ppb $O_3$ into small calsses. Each class in each site has its own pattern. Next, multiple regression for each class was repeatedly applied to determine an $O_3$ prediction submodel and to determine outliers in each class based on a certain level of standardized redisual. Thus, a prediction submodel for each homogeneous class could be obtained. The study was extended to model $O_3$ prediction for both on-time basis and 1-hr after basis. Finally, an expect system was used to build a unified classification rule based on examples of the homogenous classes for all of sites. Thus, a concept of high level $O_3$ prediction model was developed for one of $O_3$ alert systems.

• Journal of Environmental Health Sciences
• /
• v.7 no.1
• /
• pp.21-31
• /
• 1981

This survey was carried out to investigate the temperature, pH value, nitrogen (ammonia, nitrite, nitrate), turbidity, color, chloride ion, $KMnO_4$ consumed, and hardness as chemical analysis of the tap water in Seoul city area during the period from September to Octobor, 1979, and to observe the differences among the values by the distance from the water purification plant and by the district supplied tap water from-the each water purification plant. The results obtained were as follows: 1) An average of the water temperature was $19.8\pm 0.2\circ$C. 2) An average of pH was $7.18\pm 0.02$. The difference among each district was statistically significant (p<0.01), but it was not observed among each distance. 3) An average of turbidity was $1.25\pm 0.12$ ppm. The difference among each district was highly significant (p<0.01), respectively, but not among each distance. 4) An average of color was $1.43\pm 0.16$ ppm, and there were statistically significant differences by the distance and by the district (p<0.01). 5) An average of ammonia nitrogen was $0.022\pm 0.005$ ppm. The differences among each distance, and district were statistically significant (P<0.01). 6) An average of nitrite nitrogen was $0.0050\pm 0.0013$ ppm, and the difference among each distance was highly significant (p<0.01), respectively, and each district showed statistical significance (p<0.01). 7) An average of nitrate nitrogen was $0.82\pm 0.08$ ppm. The difference among each district was significant (p<0.05), and each distance showed high significance (p<0.01). 8) An average of $KMnO_4$ consumed was $3.73\pm 0.16$ ppm, and the difference among each district was significant (p<0.05), but it was not observed among each distance. 9) An average of chloride ion was $8.56\pm 0.28$ ppm, and the difference among each district was higly significant (p<0.01), respectively, but it was not observed among each distance. 10) An average of hardness was $40.69\pm 1.17$ ppm, and there was statistically significant difference by each district (P<0.01), but not by distance. 11) The interrelation between temperature and pH of the tap water revealed the negative correlation from the coefficient of it as showed r=-0.6073 and p<0.01. 12) Except water temperature, there were negative correlationships between pH and other water qualities. 13) Correlation coefficients of $KMnO_4$ comsumed and ammonia nitrogen, nitrite nitrogen were statistically significant but that of $KMnO_4$ consumed and nitrate nitrogen showed no statistical correlationship. 14) Ammonia nitrogen seems to have high correlationship with nitrite nitrogen(r= +0.6669), but not with nitrate nitrogen. 15) Nitrate nitrogen seems to have statistically significant correlationship with nitrite nitrogen (r=+0.4959), but not with ammonia nitrogen. 16) The interrelation between chloride ion and hardness of the tap water revealed positive correlation from the coefficient of it as showed as r=+0.4888 and p<0.01.

• Korean Journal of Community Nutrition
• /
• v.20 no.1
• /
• pp.21-29
• /
• 2015

Objectives: Maintaining a balanced diet is very crucial for adolescents. However, adolescents, who may have a short notion about the amount of food, find it difficult to plan daily meals by applying the target pattern proposed by the Korean Nutrition Society. This study was carried out to revise the target pattern based on cooked dishes instead of raw material food groups as an easier way for Korean adolescents to plan their meals. Methods: Target pattern for Korean adolescents were revised based on the following: $1^{st}$, categorize dish groups, $2^{nd}$, calculate representative values of each dish based on the adolescent' intake amount. $3^{rd}$, assign the recommended number of intake for each dish. Validity of the target pattern for Korean adolescent meal plan was examined by the energy content, energy contribution ratio, and NAR & INQ of nutrients. Results: The 11 dish groups categorized were bab; gook tang gigae; side dishes of meat, fish, egg, legume, kimchi, vegetable, seaweed; and between meal of fruit, and milk dairy product. Based on the representative energy values, recommended number of intake were assigned to each dish. For boys, bab and gook tang gigae: 3 each; meat, fish, egg, and legume: 1 each; kimchi and vegetable: 3 each; seaweed: 1; fruit and milk dairy product: 2 each were assigned. For girls, bab and gook tang gigae: 2 each; meat, fish, egg, and legume: choice of 3 dishes, 1 each; kimchi and vegetable: 3 each; seaweed: 1; fruit and milk dairy product: 2 each were assigned. Energy contents, energy contribution ratio of carbohydrate, protein, and fat for boys and girls were in adequate range. The NARs were 1.0 and INQs were ${\geq}1.0$ for all nutrients examined. Conclusions: Revised dish-based, instead of food-based adolescent target patterns for boys and girls were easier and a valid way of Korean adolescent meal planning.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.768-775
• /
• 2022

Current MEP designs are mostly applied by 2D-based design methods and tend to focus on simple modeling or geometry information expression such as converting 2D-written drawings into 3D modeling without taking advantage of the strength of BIM application. To increase the demand for BIM-based MEP design, geometric information, and property information of each member of the 3D model must be conveniently linked from the phase of the Design Development (DD) to the phase of Construction Document (CD). To conveniently implement a detailed model at each phase, the detailed level of each member of the 3D model must be specific, and an automatic generation of objects at each phase and automatic detailing module for each LOD are required. However, South Korea's guidelines have comprehensive standards for the degree of MEP modeling details for each design phase, and the application of each design phase is ambiguous. Furthermore, in practice, detailed levels of each phase are input manually. Therefore, this paper summarized the detailed standards of MEP modeling for each design phase through interviews with MEP design companies and related literature research. In addition, items that enable auto-detailing with DYNAMO were selected using the checklist for each design phase, and the types of detailed methods were presented. Auto-detailing items considering the detailed level of each phase were classified by members. If a DYNAMO algorithm is produced that automates selected auto-detailing items in this paper, the time and costs required for modeling construction will be reduced, and the demand for MEP design will increase.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.166-175
• /
• 1998

When we make a speaker adapted model using MAPE (maximum a posteriori estimation), the adapted model has one mixture in each state. This is because we cannot estimate a number of a priori distribution from a speaker-independent model in each state. If the model is represented by one mixture in each state, it is not well adadpted to specific speaker because it is difficult to represent various speech informationof the speaker with one mixture. In this paper, we suggest the method using several mixtures to well represent various speech information of the speaker in each state. But, because speaker-specific training dat is not sufficient, this method can't be used in every state. So, we make the number of mixtures in each state variable in proportion to the number of frames and to the determinant ofthe variance matrix in the state. Using the proposed method, we reduced the error rate than methods using one branch in each state.

• Journal of the Korean Home Economics Association
• /
• v.34 no.4
• /
• pp.217-226
• /
• 1996

The purpose of this study is to investigate the better grading methods. Iresearch into the aspects of change in each body division, using the body surface shell. And Icalculate the amount of change in each body division, measuring the bodies of 40 females. The result of this study are as follows ; 1. According to the grading sizes, the aspects of change in each body division are irregular. 2. According to the grading sizes, the amounts of change in each body division are different. 3. According to the grading sizes, the amounts of change in each body division are showed in .

• The Journal of the Korean dental association
• /
• v.13 no.4
• /
• pp.335-337
• /
• 1975

The auther observed the oral status of the 14 twins clinically, the obtainde results were as follow : 1. In each twins, the color of the teeth, the form of the uper central incisors, the periodontal conditions and the oral hygiene status were resemble each other. 2. In one twin, the dentition and the size of the palatine tonsil were different each other. 3. In two twins, the occlusion and the number of the dental caries were different each other. 4. In four twins, the eruptions of teeth were different each other.