• Korean journal of applied entomology
• /
• v.54 no.3
• /
• pp.151-158
• /
• 2015

Chlorine dioxide ($ClO_2$) can be used as a fumigant to kill insects. However, some insects can exhibit an evasive behavior from chlorine dioxide. This evasive behavior decreases the efficiency of the insecticidal activity of chlorine dioxide. This study tested a hypothesis that heat treatment suppresses the evasive behavior and synergizes the control efficacy of chlorine dioxide. Chlorine dioxide fumigation killed the red flour beetle, Tribolium castaneum, under direct exposure condition to the chemical for 12 h with median lethal concentrations of 383.67 ppm (153.63 - 955.78 ppm: 95% confidence interval) for larvae and 397.75 ppm (354.46 - 446.13 ppm: 95% confidence interval) for adults. However, when they were treated with enough diet flour, they exhibited an evasive behavior by entering the diet, which significantly decreased the control efficacy of the fumigant. To clarify the evasive behavior, the choice test of the adults were performed in Y tube arena. The test adults significantly avoided the diet treated with chlorine dioxide, while the antennatectomized adults lost the avoidance behavior. Heat treatment using $46^{\circ}C$ for 6 h killed only 10% or less of T. castaneum. Interestingly, most adults were observed to come out of the diet under the heat treatment. Chlorine dioxide treatment even at 400 ppm for 6 h did not kill any T. castaneum. However, the combined treatment of chlorine dioxide with the heat treatment for 6 h resulted in 95% mortality. These results indicated that heat treatment suppressed the evasive behavior of T. castaneum and synergized the control efficacy of the chlorine dioxide fumigant.

• The Korean Journal of Malacology
• /
• v.31 no.2
• /
• pp.103-112
• /
• 2015

Bay scallop (Argopecten irradians) has been farmed only in the South Sea of Korea. East Sea Fisheries Research Institute (ESFRI) has developed bay scallop aquaculture technologies to extend its aquaculture area to the Southeast Sea of Korea. For the artificial spawning, the water temperature was maintained at $23^{\circ}C$. Over 100,000,000 eggs were spawned through artificial spawning inductions, such as air exposure and thermal shock by rising the water temperature. The fertilization rate was over 91% with nearly 94,000,000 fertilized eggs. The shape of fertilized eggs was spherical with an average diameter of $61.7{\pm}0.05{\mu}m(54.1-67.4{\mu}m)$. Five days after fertilization, the eggs developed into prodissoconch shell, and continuously grew into umbo stage and then umbones stage. After 8 days of fertilization, the size of larva became $179.7{\pm}8.4{\mu}m$ on average ($150.4-204.8{\mu}m$), and the larva formed a foot and an eye spot. The larvae grew to $235.4{\pm}9.7{\mu}m$ in 10 days and attached to adherence material, becoming juvenile bay scallop. The shells grew from 22.71 mm to 72.40 mm in 6 month (June-December). The total weight increased from 2.0 g to 32.7 g at the same period. The daily growth rates of young scallop were $0.35mm\;d^{-1}$ (Apr. to Jun.) and $0.41mm\;d^{-1}$ (Jun. to Aug.), which were comparable to those found in the South Sea. These findings suggest that the bay scallop aquaculture may be suitable in the Southeast Sea of Korea and may provide an additional crop to aquaculturists.

• Korean journal of applied entomology
• /
• v.24 no.2 s.63
• /
• pp.107-114
• /
• 1985

This experiment was performed to see the possibility if soil-borne disease in green house can be controlled by soil solarization in Korea. Thermal death profiles of propagules of some soil-borne fungi, Fusarium oxysporum f. lycopersici, Fusarium oxysporum f. niveum, Rhizoctonia salani, Sclerotinia sclerotiorum, Sclerotium rolfsii and Pythium debaryanum, were obtained under the conditions in water-suspension and in soil. Except Pythium debaryanum, all the fungal units in water-suspension that were colonized on barley grains lost a viability within 7 days in water bath at $45^{\circ}C$. When the soil in test tubes in which barley grains infected with the fungi were also buried all the fungi tested including Pythium debaryanum were completely killed within 7 days in water bath at $45^{\circ}C$. From July to August in Korea, soil temperature at depth of 5cm and 15cm within tunnel in plastic house reached $38^{\circ}C\;to\;57^{\circ}C$ and $40^{\circ}C\;to\;47^{\circ}\C$, in 1982 and 1983 respectively. Even at 15cm depth, soil temperature were kept over $43^{\circ}C$ for 12 hours a day. Adiabatic material set under ground or under mulching with the transparent polyethylene-film on the soil surface had a boostering effect for higher soil-temperature and longer duration. Fungi buried in adiabatic block of the soil in plastic house were completely killed at 15cm depth 14 days after, and at 20cm depth 21 days after soil solarization. The exposure of the pathogens to fluctuating temperature was much more effective than to constant. From the above results, soil-borne diseases may be effectively controlled by soil solarization in the closed plastic house in hot summer season in Korea.

• Clean Technology
• /
• v.22 no.2
• /
• pp.132-138
• /
• 2016

The emission of SO₂ is inevitable in case of combustion of most fossil fuels except LNG in commercial power plant which has a bad effect on the durability of SCR catalyst. To develop a low temperature SCR catalyst which has a high NOx removal performance and excellent durability to SO₂, V₂O₅/TiO₂ catalysts were prepared by coating on the metal foam substrate with the impregnation amount of Sb₂O₃ as promotor. This study has evaluated the NOx removal performance and the durability to SO₂ on a laboratory scale atmospheric reactor and analyzed the properties of the prepared catalysts by means of porosimeter, BET, SEM (scanning electron microscope), EDX (energy dispersive x-ray spectrometer), XPS (X-ray photoelectron spectroscopy). It was found that the surface area of catalyst increased with the impregnation amount of Sb₂O₃ and the NOx removal performance showed the highest value at the 2 wt% impregnation of Sb₂O₃. This results was considered to be due to the optimum active site on the catalyst surface. And also, Sb₂O₃ impregnated catalysts presented that NOx removal performance was maintained despite the exposure to SO₂ for 5 hours. Therefore it was confirmed that metal foam SCR catalyst for low temperature could be manufactured with the optimum control of Sb₂O₃ impregnation according to the SO₂ presence or not.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.601-610
• /
• 1997

Background : Monocytes/macrophages play a central role in determining the host response during Gram-negative infection through secretion of a variety of mediators after stimulation of LPS. Even though cytokine production has been shown to play an important role in host defense during sepsis, cytokine release may also lead to tissue injury. Thus, regulation of macrophage response to LPS is critical for host survival during Gram-negative sepsis. In animals exposed to nonlethal doses of endotoxin, a characteristic hyporesponsiveness to subsequent administration of endotoxin has been observed. This phenomenon was known as 'LPS tolerance'. However, little information is available regarding the underlying mechanism of LPS tolerance. Method : Peripheral blood monocyte(PBMC) was isolated from peripheral blood of normal volunteers by adhesion purification method. To evaluate the conditions to obtain LPS tolerance, preculture was carried out with LPS at 10ng/ml for 24 hours. For stimulation, culture plates were washed two times and were stimulated with LPS at $1{\mu}g/ml$ for 4, 6 and 26 hours. To assess the underlying mechanisms of LPS tolerance, autologous serum, PMA, anti-CD14 Ab, Indomethacin or $PGF_2$ were added to preculture solution respectively. Cytokine concentrations in culture supernatants were measured using ELISA for TNF-$\alpha$ and IL-8 and mRNA of TNF-$\alpha$ and IL-8 were determined by Northern blot analysis. Results : The exposure of PBMC to low dose of LPS suppressed the cytokine production and mRNA expression of TNF-$\alpha$, but not IL-8. Anti-CD14 Ab partially recovered production of TNF-$\alpha$ which was suppressed by preculture with low dose LPS. The preculture with PMA induces LPS tolerance, as preculture with low dose LPS. Conclusion : LPS tolerance to TNF-$\alpha$ is regulated pretranslationally and is influenced by protein kinase C pathway and CD14.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.369-378
• /
• 2003

Statement of Problem: Recently, resin cements have become more widely used and have been accepted as prominent luting cements. Current resin cements exhibit less microleakage than conventional luting cements. However, the constant contact with water and exposure to occlusal forces increase microleakage even in resin cements inevitably. Most bonding resins have been modified to contain a hydrophilic resin such as 2-hydroxyethylmethacrylate (HEMA) to overcome some of the problems associated with the hydrophobic nature of bonding resins. By virtue of these modifications, bonding resins absorb a significant amount of water, and there may also be significant stresses at bonding interfaces, which may adversely affect the longevity of restorations. Therefore the reinforcement of water stability of resin cement is indispensable in future study. Purpose: This study was conducted to examine the influence of water retention on microleakage of two resin cements over the period of 6 months. Materials and Methods: 32 extracted human teeth were used to test the microleakage of a single full veneer crown. Two resin cements with different components and adhesive properties - Panavia F (Kuraray Co., Osaka, Japan) and Super-Bond C&B (Sun Medical Co., Kyoto, Japan)- were investigated. The storage medium was the physiological saline solution changed every week for 1 month, 3 months, and 6 months. One group was tested after storage for 1 day. At the end of the each storage period, all specimens were exposed to thermocycling from $5^{\circ}C$ to $55^{\circ}C$ of 500 cycles and chewing simulation of 50,000 cycles, and then stained with 50% silver nitrate solution. The linear penetration of microleakage was measured using a stereoscopic microscope at ${\times}40$ magnification and a digital traveling micrometer with an accuracy of ${\pm}3{\mu}m$. Values were analyzed using two-way ANOVA test, Duncan's multiple range tests (DMRT). Results : Statistically significant difference of microleakage was shown in the 3-month group compared with the1-day or 1-month group in both systems (p<0.05) and there were statistically significant differences in microleakage between the 3-month group and the 6-month group in both systems (p<0.05). The two systems showed different tendency in the course of increased microleakage during 3 months. In Panavia F, microleakage increased slowly throughout the periods. In Super-Bond C&B, there was no significant increase of microleakage for 1 month, but there was statistically significant increase of microleakage for the next 2 months. For the mean microleakage for each period, in the 3-month group, microleakage of Super-Bond C&B was significantly greater than that of Panavia F. On the other hand, in the 6-month group, microleakage of Panavia F was significantly greater than that of Super-Bond C&B (p<0.05). Conclusion: Within the limitation of this study, water retention of two different bonding systems influence microleakage of resin cements. Further studies with the longer observation periods in viro are required in order to investigate water stability and the bonding durability of the resin cement. CLINICAL IMPLICATIONS Microleakage at the Cement-tooth interfaces did not necessarily result in the failure of the crowns. But it is considered to be a major factor influening the longerity of restorations. Further clinical approaches for decreasing the amount of microleakage are required.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.161-167
• /
• 2011

Purpose: The purpose of this study was to evaluate the influence of porcelain re-firing on the formation of surface bubble and on the change in shade of metal-ceramic crown exposed to artificial saliva. Materials and methods: Thirty disk-shaped specimens were made in 10 mm diameter with 0.5 mm metal core thickness and 1 mm ceramic thickness. A spectroradiometer was used to determine the CIE Lab coordinates. The number and size of surface bubble were observed with a stereomicroscope. After the exposure to artificial saliva for 7 days, re-firing was performed at glazing temperature. After re-firing, the CIE Lab were calculated, and the number and size of surface bubble were observed again. The change in shade was expressed with ${\Delta}E$. Statistical analysis was done with paired t-test for the change in the number of surface bubble and student t-test for the change in the size of surface bubble (${\alpha$}=0.05). Results: Shade difference was calculated 2.14 ${\Delta}E$ units. The mean number of surface bubble was $1.33{\pm}1.49$ before re-firing, $3.27{\pm}2.90$ after re-firing. After re-firing, the number of surface bubble was significantly increased (P<.05). The mean size of surface bubble was $81.97{\pm}32.03\;{\mu}m$ before re-firing, $142.94{\pm}47.40\;{\mu}m$ after re-firing. After re-firing, the size of surface bubble was significantly increased (P<.05). Conclusion: Shade change after re-firing was perceptible (${\Delta}E$ < 2.0) and clinically acceptable (${\Delta}E$ < 3.7). The number and size of surface bubble was significantly increased after re-firing. Further investigation to decrease the surface bubble on the extra oral repair of metal-ceramic crown, will be needed in future study.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.600-612
• /
• 2001

The purpose of this study is concerned with an investigation of the actual condition of traumatic injuries of teeth and supporting structures in children to set up possible criteria for prevention and treatment of injured teeth. The materials consisted of the clinical records of 431 traumatically injured teeth of 212 children, accumulated during two years from the first of April in 1998 to the end of March in 2000, supplied from the Dept. of Pediatric Dentistry, Chonbuk National University Hospital. The incidence of injuries in boys was extremely high for permanent teeth, twice as high as in girls. Accidents to primary teeth were most common from 1 to 2 years of age and to permanent teeth were most from 8 to 9 years of age. The most common cause of trauma was a fall for both primary and permanent teeth, followed by collision. The anterior teeth in maxilla was most frequently affected by trauma in both the primary and permanent teeth. The most common type of trauma were loosening for the primary teeth, followed by luxation types which included the intrusion, displacement and extrusion and complete avulsion types. For the permanent teeth, the most common type of trauma were tooth fracture. The most common trauma of soft tissue was laceration of upper lip, lower lip and gingiva of maxilla Concerning treatment at the first visit, primary teeth with only loosening and concussion were not usually treated. Permanent teeth were often treated by crown restorations for crown fractures and by endodontic procedures for pulpal exposure. Though we could elucidate actual condition of traumatic injuries of teeth in children, we should make a follow-up survey to ensure the prognosis of injured teeth and establish the most desirable criteria for traumatized teeth in children.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.555-563
• /
• 2004

The pH of beverages is known to be low and have, therefore, been implicated in the increasing incidence of erosion. Erosion is believed to be the predominant cause of teeth wear in children and young adults, although there will always be a contribution from attrition and abrasion. The aim of the present study was to evaluate the effect of yogurt on the progression of erosive demineralization in human enamel using demineralization model in vitro. In 4 yogurts, available on the market, pH, buffering capacity and the concentrations of calcium, phosphate and fluoride were determined. The buffering effect was determined by titration with NaOH. 50 milliliters of each drink was then titrated with 1M sodium hydroxide, added in 0.5 milliliters increments, until the pH reached about 7. Human deciduous enamel(n=40) samples were divided into four groups and exposed to 80ml of the yogurt for 30,60, 90 and 120min. Enamel surface microhardness(VHN) was examined before and after each exposure. 1. The average PH of fermented milk was 3.77 and this pH value was acidic enough to cause tooth erosion. 2. All of the fermented milks were found to be erosive(p<0.05) 3. The teeth exposed to the fermented milk all showed erosion like lesions and microhardness measurements showed that enamel surface hardness decreased proportionately with increased time of immersion in all tooth specimen groups. 4. After immersion for 30 and 60 minutes, reduction rate of microhardness values was not significantly different between the groups(p>0.05). However, after 90 and 120 minutes, reduction rate of each group was significantly different(p<0.05).

• Journal of Radiation Protection and Research
• /
• v.33 no.2
• /
• pp.77-86
• /
• 2008

This study attempted to provide reference materials for improving the behavior level in radiation safety managements by drawing a prediction model that affects the radiation safety management behavior because the radiation safety management of medical Cyclotrons, which can be used to produce radioisotopes, is an important factor that protects radiation caused diseases not only for radiological operators but average users. In addition, this study obtained follows results through the investigation applied from January 2 to January 30, 2008 for the radiation safety managers employed in 24 authorized organizations, which have already installed Cyclotrons, through applying a specific form of questionnaire in which the validity was guaranteed by reference study, site investigation, and focus discussion by related experts. The radiation safety management were configured as seven steps: Step 1 is a production preparation step, Step 2 is an RI production step, Step 3 is a synthesis step, Step 4 is a distribution step, Step 5 is a quality control step, Step 6 is a carriage container packing step, and Step 7 is a transportation step. it was recognized that the distribution step was the most exposed as 15 subjects (62.5%), the items of 'the sanction and permission related works' and 'the guarantee of installation facilities and production equipments' were the most difficult as 9 subjects (37.5%), and In the trouble steps in such exposure, the item of 'the synthesis and distribution' steps were 4 times, respectively (30.8%). In the score of the behavior level in radiation safety managements, the minimum and maximum scores were 2.42 and 4.00, respectively, and the average score was $3.46{\pm}0.47$ out of 4. Prosperity and well-being programs in the behavior and job in radiation safety managements (r=0.529) represented a significant correlation statistically. In the drawing of a prediction model based on the factors that affected the behavior in radiation safety managements, general characteristics, organization characteristics, and selfefficacy didn't show a significant path statistically in which the prosperity and well-being programs in job characteristics affected the behavior in radiation safety managements. Therefore, it is necessary to establish a strategy that improves the level of prosperity and well-being levels in job characteristics in order to increase the behavior in radiation safety managements. Thus, this study provides basic materials for the radiation safety management of Cyclotron through the full-scale investigation that is first applied in Korea.