• 한국초전도ㆍ저온공학회논문지
• /
• 제18권4호
• /
• pp.1-4
• /
• 2016

We investigated the relation between the Cu-O bond length and the superconducting properties of $BaSnO_3$ (BSO)-added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films by using extended x-ray absorption fine structure (EXAFS) spectroscopy. 4 wt.% $BaSnO_3$ (BSO) added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films with varying thickness from $0.2{\mu}m$ to $1.0{\mu}m$ were fabricated by using pulsed laser deposition (PLD) method. The transition temperature ($T_c$) and the residual resistance ratio (RRR) of the GdBCO films increased with increasing thickness up to $0.8{\mu}m$, where the crystalline BSO has the highest peak intensity, and then decreased. This uncommon behaviors of $T_c$ and RRR are likely to be created by the addition of BSO, which may change the ordering of GdBCO atomic bonds. Analysis from the Cu K-edge EXAFS spectroscopy showed an interesting thickness dependence of ordering behavior of BSO-added GdBCO films. It is noticeable that the ordering of Cu-O bond and the transition temperature are found to show opposite behaviors in the thickness dependence. Based on these results, the growth of BSO seemingly have evident effect on the alteration of the local structure of GdBCO film.

• 방사성폐기물학회지
• /
• 제8권3호
• /
• pp.201-205
• /
• 2010

고준위방사성폐기물에서 유출되어 나오는 아이오딘의 이동을 저지하기 위하여 은을 흡착시킨 벤토나이트 블록에 NaI 용액을 흘려주었을 때 대부분의 아이오딘이 흡착되었다. 이 은이온에 의한 아이오딘의 저지 메커니즘을 상세히 조사하기 위하여 아이오딘과 접촉하기 전후의 은이 흡착된 벤토나이트의 X-ray Absorption Near Edge Structure (XANES)와 Extended X-ray Absorption Fine Structure (EXAFS) 스펙트 럼과 표준물질로서 AgO, $Ag_2O$, AgI의 스펙트럼을 비교하였다. 그 결과, 벤토나이트에 흡착되었던 은이 떨어져 나와 AgI 침전 클러스터를 형성함으로서 아이오딘의 이동이 지연되는 것으로 생각된다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2006년도 동계학술연구발표회 및 자성 스핀트로닉스 국제학술대회
• /
• pp.10-11
• /
• 2006

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.23-23
• /
• 2006

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1997년도 제12회 학술발표회 논문개요집
• /
• pp.178-178
• /
• 1997

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2002년도 High Temperature Superconductivity Vol.XII
• /
• pp.21-21
• /
• 2002

• Bulletin of the Korean Chemical Society
• /
• 제27권2호
• /
• pp.329-332
• /
• 2006

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.61-64
• /
• 2008

$Pr_{0.3}Sr_{0.7}Co_{0.3}Fe_{0.7}O_{3-\delta}$ (PSCF3737) was prepared and characterized as a cathode material for intermediate temperature-operating solid oxide fuel cell (IT-SOFC). X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), extended X-ray absorption fine structure (EXAFS), and electrical property measurement were carried out to study cathode performance of the material. XPS and EXAFS results proved that oxygen vacancy concentration was decreased and lattice constants of the perovskite structure material were increased by doping Fe up to 70 mol% at B-site of the crystal structure, which also extended the distance between oxygen and neighbor atoms. Thermal expansion coefficient (TEC) of PSCF3737 is smaller than that of $Pr_{0.3}Sr_{0.7}CoO_{3-\delta}$(PSC37) due to lower oxygen vacancy concentration. PSCF3737 showed better cathode performance than PSC37. It might be due good adhesion by a smaller difference of TEC between $Gd_{0.1}Ce_{0.9}O_2$ (CGO91) and electrode. Composite material PSCF3737-CGO91 showed better compatibility of TEC than PSCF3737. However, PSCF3737-CGO91 did not represent higher electrochemical property than PSCF3737 due to decreased reaction sites by CGO91.

• 한국분말재료학회지
• /
• 제10권1호
• /
• pp.46-50
• /
• 2003

Lee et al. reported that a mixture of Cu and Ta, the combination of which is characterized by a positive heat of mixing, $\{Delta}H_{mix}$ of +2 kJ/㏖, can be amorphized by mechanical alloying(MA). It is our aim to investigate to what extent the MA is capable of producing a non-equilibrium phase with increasing the heat of mixing. The system chosen is the binary $Cu_{30}Mo_{70}$ with $\{Delta}H_{mix}$=+19 kJ/㏖. The mechanical alloying was carried out using a Fritsch P-5 planetary mill under Ar gas atmosphere. The vial and balls are made of Cu containing 1.8-2.0 wt.%Be to avoid contaminations arising mainly from Fe when steel balls and vial are used. The MA powders were characterized by the X-ray diffraction, EXAFS and thermal analysis. We conclude that two phase mixture of nanocrystalline fcc-Cu and bcc-Mo with grain size of 10 nm is formed by the ball-milling for a 3:7 mixture of pure Cu and Mo, the evidence for which has been deduced from the thermodynamic and structural analysis based on the DSC, X-ray diffraction and EXAFS spectra.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.953-956
• /
• 2003

Transparent conductive ZnO:Ga thin films were deposited on glass substrates using rf magnetron sputtering method for flat panel display. The ZnO:Ga films were preferentially oriented to c-axis (002) of on substrates. The surface morphology was smooth and had not porous whatever substrate temperature was. The electrical conductivity of the thin films were in the range of $1.6{\times}10^2{\sim}6.7{\times}10^3\;{\Omega}^{-1}cm^{-1}$ at the growth temperature from 50 to $400^{\circ}C$, whereas has a maximum at around $250^{\circ}C$. By combining of XRD and EXAFS, the crystallinity and grain size decreased with increasing substrate temperature corresponding to the reduction of the grain-boundary scattering. The optical transmittance of sputtered ZnO:Ga thin films had an improved about 86% in the UV-visible region.