• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1108-1109
• /
• 2008

To survive in outdoor environments, photovoltaic modules rely on packaging materials to provide requisite durability. We analyzed the properties of encapsulant materials that are important for photovoltaic module packaging. Recently, the thickness of solar cell gets thinner to reduce the quantity of silicon. And the reduced thickness make it easy to be broken while PV module fabrication process. Solar cell's micro cracks are increasing the breakage risk over the whole value chain from the wafer to the finished module, because the wafer or cell is exposed to tensile stress during handling and processing. This phenomenon might make PV module's maximum power and durability down. So, when using thin solar cell for PV module fabrication, it is needed to optimize the material and fabrication condition which is quite different from normal thick solar cell process. Normally, gel-content of EVA sheet should be higher than 80% so PV module has long term durability. But high gel-content characteristic might cause micro-crack on solar cell. In this experiment, we fabricated several specimen by varying curing temperature and time condition. And from the gel-content measurement, we figure the best fabrication condition. Also we examine the crack generation phenomenon during experiment.

• 대한치과기공학회지
• /
• 제42권3호
• /
• pp.298-305
• /
• 2020

Here, we studied the sports mouse guard as an oral device system, to minimize the sports related facial and dental injuries, jawbone fracture and brain injury, and by layering the hardened sheets for improving the activity performance and stable wearing. By pressuring and layering 2 soft- and 1 hard-layers of ethylene vinyl acetate (EVA) thermoplastic materials, for a category of martial art, record sports and leports, here we introduce a methodology for thickness control of layers to protect the teeth and oral structure. A personally customized mouse guard optimized for sports by layering a mixture of soft and hardened sheets is not easily detached during the sporting activity, easy to breathe through, comforts to wear, and also improves the sporting record. A designed EVA thermoplastic material for individual sports is used as the mouth guard, which is stably attached, easily removed, and convenient for breathing through the mouth.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.556-559
• /
• 1999

In order to investigate the influence on dielectric characteristic due to physical structural change of specimens, we investigated the frequency and temperature dependency of tan $\delta$ for virgin specimen and mixtured specimens in the temperature range of 25[$^{\circ}C$] ~ 120[$^{\circ}C$], frequency range of 300(mv) ~ 1500[mV] An experimenatal specimen is selected as Low Liner Density Polyethylene (LLDPE) and Ethylene Vinyl Acetate(EVA) (thickness 200[$\mu$m]) produced by mixture ratio of 50:50, 60:40, 70:30 and 80:20. From the results of XRD it can be confirmed that the peak of LLDPE and EVA made by mixture ratio of 70:30 at 2$\theta$= 21.4$^{\circ}$is higher and the peak made by amorphous contribution at 2$\theta$= 19.5[$^{\circ}$] is almostly constant without no concern.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.388-389
• /
• 2007

Objective of the study is development of 23kV insulating jackets for protection of workers from electrical shock. The breakdown voltage of Ethylene-VinylAcetate copolymers(EVA) films in insulating oil were measured. Insulating jackets were made by the high frequency welding machine, and withstanding voltage test of these were measured. For breakdown voltage at AC 30kV, the number of EVA film with $105{\pm}5{\mu}m$ thickness was 4$\sim$5pieces. When AC 30kV during 3 minutes supplied on the insulating jackets, those were keep on the good quality.

• Elastomers and Composites
• /
• 제36권1호
• /
• pp.52-60
• /
• 2001

발포체의 물성은 발포체의 밀도, 사용된 폴리머의 기계적 물성과 열린 셀(open cell) 함량, 셀 크기, 셀 크기 분포, 셀 형태, 격벽의 두께 등을 포함하는 셀 구조에 의존하며 이러한 발포체의 밀도는 사용된 폴리머의 종류와 가교제의 농도, 발포제의 농도 그리고 가공 기술 및가공 조건 같은 다양한 원료물질과 가교조건에 영향을 받는다. Ethylene vinyl acetate coplymer (EVA) 발포체는 가교 발포체로서 가교속도와 발포제의 분해속도에 의해 발포특성에 영향을 받으며 이에 따라 발포체 물성에도 영향을 미친다. 본 연구에서는 가공 온도인 $155^{\circ}C$에서의 시간에 따른 발포제의 분해 속도 차이와 이에 따른 발포특성과 발포체의 물성에 대한 영향을 평가하였다. 발포제 분해 속도가 보다 느린 경우, 발포제 분해속도가 빠른 경우와 비교하여 낮은 밀도를 보여주었으며, 우수한 충격흡수성을 나타내었고 발포체의 셀 크기는 보다 균일하였다.

• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1250-1256
• /
• 2012

Resilient materials are used to reduce the floor impact sound in apartment buildings. Since an on-dol layer is installed in the resilient materials' upper part, thickness deformation can be occur in the resilient material. It is necessary to check a thickness deformation grade for a long period of time. In this research, we measured thickness deformation over 400th day to the resilient materials(EPP, EPS, EVA) which is used in Korea. Although there was a difference according to the kind of measurement test specimens, it became clear that thickness was decreases as to time increased. The thickness deformation grade of ten years after was calculated based on the thickness measurement result. Compare with the calculated result and result of ISO 20392. Larger thickness deformation occurred in the measurement result of these research findings compare with the ISO standard.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.461-464
• /
• 2004

The reduction effect of floor impact noise depends on the various factors such as stiffness and thickness of the concrete slab, finishing If ceiling materials and the composition method. Among the rest it is well known that floating floor system is more effective. Standard floating floor(SFF) type-2 consisted of 50mm lightweight aerated concrete(LAC) and 20mm damping material has been widely used. But LAC construction problem on dry damping material occurred and the reduction effect of floor impact noise has bare minimum qualifications. Thus the aim of this study is to develop 40mm composite damping material(Soundzero Plus) for SFF type-5 which substitute LAC and damping material. 'Soundzero Plus' is satisfied with quality requirement for damping material for SFF. The heat transition rate, $0.45W/m^2{\cdot}K$ is more effective 55% about than the regulation. The test results of floor impact noise by using 'Soundzero Plus' are showed good improvement about 12dB (tested by tapping machine) and 4dB (tested by bang machine) between before and after.

• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.281-291
• /
• 2022

Global warming is accelerating due to the use of fossil fuels that have been used continuously for centuries. Now, humankind recognizes its seriousness, and is conducting research on searching for eco-friendly and sustainable energy. In the field of solar energy, which is a kind of eco-friendly and sustainable, many studies are being conducted to enhance the output performance of the module. In this study, the output improvement for the shingled module structure was studied. In order to improve the output performance of the module, the thickness of the encapsulant was increased, and the lamination process conditions have been improved accordingly. After that, the crosslinking rate was analyzed, and the suitability of the lamination process conditions was judged using this. In addition, a peeling test was conducted to analyze the correlation between the adhesion of the encapsulant and the output performance of the module. Finally, the optimization for the encapsulant material and the lamination process conditions for high-power shingled modules was established, and accordingly, the market share of high-power shingled modules in the solar module market can be expected to rise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.451-456
• /
• 2004

In this study, evaluation was carried out for reduction method of floor impact noise through field test and the effective methods for heavy impact noise were proposed. As a field test, impact noise reduction materials such as EPP, EEPS, EVA, PE and so on, did not satisfied the recommandation value at the condition of 150mm thickness concrete slab. The evaluation results for those materials by 'inverse A curve' showed $53\sim55dB$ at heavy impact noise and $53\sim58dB$ at light impact noise. But, two methods proposed by authors were evaluated $47\sim50dB$ at heavy Impact noise and $54\sim58dB$ at light Impact noise on the similar concrete slab thickness.

• 콘크리트학회논문집
• /
• 제25권1호
• /
• pp.73-80
• /
• 2013

이 연구는 폴리머 시멘트 슬러리로 도장한 도장철근의 부착강도 개선에 영향을 미치는 초기재령에서의 PCS 도장재 배합에 관한 연구로 폴리머의 종류, 시멘트의 종류, 폴리머 시멘트비, 도장재의 양생재령, 도장두께 등을 변화시켜 배합을 설정하여 부착강도 시험을 실시하였다. 이 연구 결과, PCS 도장철근의 부착강도는 거의 모든 배합에서 도장하지 않은 보통철근 및 에폭시철근에 비해 높은 부착강도를 나타냈다. 도장철근의 최대 부착강도는 보통철근에 비해 1.52배, 에폭시 철근에 비해 1.58배로 높게 나타났으며, 도장두께는 $100{\mu}m$에서 우수하였으며, 시멘트는 초조강 시멘트, 폴리머는 EVA, 폴리머 시멘트비는 80%~100% 범위에서 우수한 부착강도를 나타냈다. 또한 양생재령에 있어서는 3시간의 단시간 양생에 의한 부착강도도 양생재령 1일 및 7일에 비해 열악하지 않고 동등이상의 부착강도를 나타내 실제 현장에서의 사용성면에서 유리한 것으로 볼 수 있다.