• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.355-360
• /
• 2002

ElectroSlag Strip Overlaying (ESSO) process has been around since 1970. ESSO process had limited acceptance due to a few problems associated with the use of this process in its very early stage. Limited knowledge and, most significantly, poor quality of the equipment and welding flux gave the ESSO process a bad name. However, this process is well accepted today and used in North America, Europe and Japan. The ESSO process provides low dilution overlays at high deposition rates, excellent and consistent deposit chemistry with excellent surface quality, and virtually no defects. Capitan has taken this process one step further through extensive research and development of the process itself as well as the equipment. The improvement brought to the process warranted the issuance in May 2000 of an US patent. This study demonstrates the feasibility of this process with immediate positive production results. The main achievements of this work are as follows: $\textbullet$ Development of six various strip-flux combinations on three different base materials: carbon steel, $\frac{1}{4}$ Cr/.5 Mo and 2 $\frac{1}{4}$ Cr/l Mo, fully tested with: penetrant, ultrasound, bends, hardness, overlay chemistry, corrosion and hydrogen disbonding. $\textbullet$ 12" dia. 90 hot formed elbows from straight pipe electroslag overlayed with "1 layer" and "2 layer" Alloy 625 $\textbullet$ a very unique development of miniaturized overlaying equipment able to perform overlay in pipe with diameters as low as 10" (254 mm). This development has large applications in the field of offshore, petrochemical, refining, pulp and paper and power generation industries. The aftermath of this development was its immediate acceptance by major end users with the completion of four projects of overlayed pipe in the USA and Far East Asia.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.47-54
• /
• 2020

A brittle fracture is one of the source of structural damage and can bring a fatal accident. The inner shell of LNG storage tank should be designed and applied to construction by ensure that no brittle crack will occur under -162℃ condition. In point of view of fracture mechanics brittle fracture in the structure could be referred as crack initiation and crack arrest. It should be designed no crack initiation. However, in the unlikely event of a brittle fracture occurring, a back-up function of arresting the brittle crack should be included for the design. In this paper investigated the characteristics of 9% Ni steel thick plates of having a capability of arresting brittle cracks under the thickness of 33 mm, 37mm, 40 mm. First, charpy test has performed to evaluate the fundamental brittle impact fracture property of 9% Ni steel under the temperature of 24℃, -162℃ and -196℃. In addition, Duplex ESSO tests were also performed under -196℃ to evaluate the capability of crack arrest for 9% Ni steel. From the experiments results, it was confirmed that all the thickness of 9% Ni steel plates exhibits sufficient brittle crack arrest fracture toughness for the application of LNG storage tank as a inner shell.

• Korea Petroleum Association Journal
• /
• no.4 s.26
• /
• pp.91-94
• /
• 1983

이 자료는 Esso Europe Inc.와 DRI Europe Ltd.가 각가 작성 ㆍ발표한 서구의 장기에너지 수급전망을 취합 ㆍ요약한 것을 번역한 것이다. <편집자 주>

• The tire
• /
• s.5
• /
• pp.3-7
• /
• 1967

본논고는 필자가 고무에 관한 기술연수차 체미시 미국 New Jersey 주 Linden 시소재 ESSO연구소에서 강의받은 내용을 초록한 것임.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.103-103
• /
• 2009

As the size of containership increased over 14,000TEU, thick steel plate with high strength has been used. The plate thickness increased over 70mm and yield strength of the steel plate was around $47kg_f/mm^2$. Many researchers reported that the thick welded plate has low crack arrest toughness. They noticed the crack arrest ability is dependent on the plate thickness. In other words, brittle crack propagates straightly along the welded line and make abrupt fracture in the thick plate which causes low $K_{ca}$. In this study, the other factors, especially welding heat input, to cause low crack arrest toughness was investigated for thick steel plate welds. EH grade steel plates were used in this study and 50 to 80 thick plates were tested to confirm thickness sensitivity. Electro gas welding (EGW) and flux cored arc welding (FCAW) were adopted to prepare the welded joints. Temperature gradient ESSO test was performed to measure $K_{ca}$ values with the variation of welding variables. As a result of this study, regardless of plate thickness, welding heat input to cause welding residual stress around crack path is a key factor to control the brittle crack propagation in welded joints.

• Journal of Welding and Joining
• /
• v.33 no.1
• /
• pp.35-40
• /
• 2015

Recently, there have been the increase of ship size and the development of oil and gas in arctic region. These trends have led to the requirements such as high strength, good toughness at low temperature and good weldability for prevent of brittle fracture at service temperature. There has been the key issue of crack arrestability in large size structure such as container ship. In this report for the first time, crack arrest toughness of thick steel plate welds was evaluated by large scale ESSO test for estimate of brittle crack arrestability in thick steel plate. For large structures using thick steel plates, fracture toughness of welded joint is an important factor to obtain structural integrity. In general, there are two kinds of design concepts based on fracture toughness: crack initiation and crack arrest. So far, when steel structures such as buildings, bridges and ships were manufactured using thick steel plates (max. 80~100mm in thickness), they had to be designed in order to avoid crack initiation, especially in welded joint. However, crack arrest design has been considered as a second line of defense and applied to limited industries like pipelines and nuclear power plants. Although welded joint is the weakest part to brittle fracture, there are few results to investigate crack arrest toughness of welded joint. In this study, brittle crack arrest designs were developed for hatch side coaming of large container ships using arrest weld, hole, and insert technology.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.40-53
• /
• 1996

In this paper, the wave drift damping is studied. An approximate method is adopted to calculate the wave drift damping for the sake of practical applications. By assuming the ship's forward speed to be low, the Green function and the velocity potential are expanded asymptotically with respect to the Brard number(${\tau}$) and terms up to the first order of ${\tau}$ are retained. Mean wave drift forces are computed straightforwardly. The wave drift damping is estimated as the change rate of the mean wave drift force with respect to the ship's speed. In order to validate the present method, Series 60(Cb=0.7) ship is exemplified for forward speed of Fn=0, 0.02 and 0.04. To predict the wave drift damping experimentally, three geosym models of the Esso-Osaka tanker are used. Also the effect of drift angle on the wave drift damping is also considered. Comparisons between numerical and experimental results show reasonable agreements.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.41-46
• /
• 2001

The very large vessels like VLCC and container ship have been built recently and those vessels have smaller structural strength in comparison with the other convectional skips. As a result the fatigue destruction of upper deck occurs a frequently due to the springing phenomenon at the encountering frequencies. In this study, the hydrodynamic loads are calculated by three-dimensional source distribution method with the translating and pulsating Green function. A ship is longitudinally divided into 23 sections and the added mass, damping and hydrodynamic force of each section is calculated. focusing only on the vertical motion. Stiffness matrix is calculated by the Euler beam theory. The calculation is carried out for Esso Osaka.

• Journal of Ship and Ocean Technology
• /
• v.3 no.3
• /
• pp.25-44
• /
• 1999

Estimation efficiencies according to different sea trial are investigated in connection with sensitivity analysis, and new trial method is proposed which can improve the estimation efficiency of hydrodynamic derivatives. MMG Equation with Kijima's formula is used for simulation. Extended Kalman Filter is chosen for estimation technique and hydrodynamic derivatives of interest is limited to 12 of those in sway and yaw equations. Esso Osaka is selected for the test ship. Sensitivity analysis and estimation results based on conventional trials show that a more sensitive derivative gives more efficient estimation result. Sensitivities of nonlinear derivatives become pronounced in the trial where steady condition lasts longer such as turning test, while sensitivities of linear derivatives gas a larger values in the trial where unsteady condition lasts longer such as 10deg-10deg zigzag test. Consequently, in new method , named S-type trial, steady and unsteady condition are combined appropriately to increase sensitivities. Linear derivatives are estimated better in S-type trial and the estimation of nonlinear derivatives is improved to extent.

• Journal of information and communication convergence engineering
• /
• v.2 no.1
• /
• pp.9-14
• /
• 2004

In this paper the modeling of the RLP layer in CDMA2000 is presented, which uses the NAK based ARQ scheme for Random Error Channels. The RLP performs a partial link recovery through limited number of RLP frame transmission in case of frame error. In case when the RLP fails due to excessive frame error, the control is passed on to the higher (TCP) layer. The TCP layer provides the complete end-to-end recovery. Thus the reliable performance at the TCP/RLP is essential to maintain the required Quality of Service in the DS-CDMA wireless links. The modeling is done for the performance analysis of the system in terms of the throughput and the mean extra delays, which are calculated analytically and are compared with the results generated by the simulations. This paper studies the effect of the random errors over different types of RLP frame formats and also the performance of the NAK based ARQ mechanism used under these conditions. The simulation provides with the over all characteristics of the throughput and the mean extra delay in terms of realistic environment parameters like Eb/No and probability of packet error (PE), based on the channel conditions.