• 제목/요약/키워드: ES-ED

검색결과 33건 처리시간 0.032초

Heart Sound Recognition by Analysis of wavelet transform and Neural network.

  • Lee, Jung-Jun;Lee, Sang-Min;Hong, Seung-Hong
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 ITC-CSCC -2
    • /
    • pp.1045-1048
    • /
    • 2000
  • This paper presents the application of the wavelet transform analysis and the neural network method to the phonocardiogram (PCG) signal. Heart sound is a acoustic signal generated by cardiac valves, myocardium and blood flow and is a very complex and nonstationary signal composed of many source. Heart sound can be discriminated normal heart sound and heart murmur. Murmurs have broader frequency bandwidth than the normal ones and can occur at random position of cardiac cycle. In this paper, we classified the group of heart sound as normal heart sound(NO), pre-systolic murmur(PS), early systolic murmur(ES), late systolic murmur(LS), early diastolic murmur(ED). And we used the wavelet transform to shorten artifacts and strengthen the low level signal. The ANN system was trained and tested with the back- propagation algorithm from a large data set of examples-normal and abnormal signals classified by expert. The best ANN configuration occurred with 15 hidden layer neurons. We can get the accuracy of 85.6% by using the proposed algorithm.

  • PDF

왕겨풍구의 성능(性能)에 영향(影響)을 미치는 작동요인(作動要因)에 관(關)한 연구(硏究) (The Effects of Operational Factors On the Performance of Husk Separator)

  • 장현택;노상하;정창주
    • Journal of Biosystems Engineering
    • /
    • 제9권1호
    • /
    • pp.22-33
    • /
    • 1984
  • Husk separator is an indispensable equipment in rice milling plants. However, any basic research on the designing and operating criteria of the husk separator have rarely been conducted in Korea. According to the survey results reported recently, grain loss occurs in the process of rice husk separation at custom rice milling plants in Korea and the performance of husk separator has also not been identified. With this regard this study was conducted with a typical commercial husk separator to investigate the effect of the operational factors such as feed rate, blower speed and opening ratio on the velocity distribution in the air duct and the performance of the separator. The results are summerized as follows: 1. The average wind velocity in the primary air duct increased linearly with the blower rpm and the size of air inlet port in both cases of double type and single type operations. 2. The coefficient of variation in the horizontal wind velocities in the primary air duct was the minimum when the opening ratio was 0.22 ($0.052m^2$ of air inlet port) in both cases of single type and double type operations regardless of the blower speeds used in this test. The average wind velocity at the upper part of air duct was greater by 2-5 m/s than the velocity at the bottom part in double type operation. In case of single type operation, however, the average velocity in the middle part was greater than the upper or bottom part when the opening ratio was greater than 0.74. 3. The relationship between the overall effectiveness of separation(Ed for double type and Es for single type) and the average wind velocity (Va) in the primary air duct was expressed in the following quadratic functions. $$Ed=-190.84+106.18Va-10.052Va^2$$ ($r^2$ = 0.97782) $$Es=-223.76+106.23Va-9.1935Va^2$$ ($r^2$ = 0.97029) The average wind velocity required to obtain the overall effectiveness of separation more than 80% ranged from 4.04 m/sec to 5.84 m/sec in case of double type operation, and from 4.70 m/sec to 6.20 m/sec in case of single type. 4. An optimum wind velocity can be obtained with an increase in the blower speed or the size of air inlet port as presented in Figure 8. There was a tendency that the faster the blower speed, the narrower the control range of the air inlet port. 5. The feed rates (1850kg/hr and 2100kg/hr) adopted in this experiment did not bring about a significant difference in both the overall effectiveness of separation and the power consumption. 6. The energy consumption increased cubically with the blower speed but linearly with the size of the air inlet port. On the basis of the results described in items 1, 3, and 6, it would be more economic to adjust the size of the air inlet port larger with a relatively low blower speed than to adjust the size smaller with a relatively high speed.

  • PDF

Computed Tomography-Based Ventricular Volumes and Morphometric Parameters for Deciding the Treatment Strategy in Children with a Hypoplastic Left Ventricle: Preliminary Results

  • Goo, Hyun Woo;Park, Sang-Hyub
    • Korean Journal of Radiology
    • /
    • 제19권6호
    • /
    • pp.1042-1052
    • /
    • 2018
  • Objective: To determine the utility of computed tomography (CT) ventricular volumes and morphometric parameters for deciding the treatment strategy in children with a hypoplastic left ventricle (LV). Materials and Methods: Ninety-four consecutive children were included in this study and divided into small LV single ventricle repair (SVR) (n = 28), small LV biventricular repair (BVR) (n = 6), disease-matched control (n = 19), and control (n = 41) groups. The CT-based indexed LV volumes, LV-to-right-ventricular (LV/RV) volume ratio, left-to-right atrioventricular valve (AVV) area ratio, left-to-right AVV diameter ratio, and LV/RV long dimension ratio were compared between groups. Proportions of preferred SVR in the small LV SVR group suggested by the parameters were evaluated. Results: Indexed LV end-systolic (ES) and end-diastolic (ED) volumes in the small LV SVR group ($6.3{\pm}4.0mL/m^2$ and $14.4{\pm}10.2mL/m^2$, respectively) were significantly smaller than those in the disease-matched control group ($16.0{\pm}4.7mL/m^2$ and $37.7{\pm}12.0mL/m^2$, respectively; p < 0.001) and the control group ($16.0{\pm}5.5mL/m^2$ and $46.3{\pm}10.8mL/m^2$, respectively; p < 0.001). These volumes were $8.3{\pm}2.4mL/m^2$ and $21.4{\pm}5.3mL/m^2$, respectively, in the small LV BVR group. ES and ED indexed LV volumes of < $7mL/m^2$ and < $17mL/m^2$, LV/RV volume ratios of < 0.22 and < 0.25, AVV area ratios of < 0.33 and < 0.24, and AVV diameter ratios of < 0.52 and < 0.46, respectively, enabled the differentiation of a subset of patients in the small LV SVR group from those in the two control groups. One patient in the small LV biventricular group died after BVR, indicating that this patient might not have been a good candidate based on the suggested cut-off values. Conclusion: CT-based ventricular volumes and morphometric parameters can suggest cut-off values for SVR in children with a hypoplastic LV.

지리산오갈피, 가시오갈피, 오갈피나무, 오가나무 추출물의 항염증, 피부장벽개선, 항노화 효능 비교 (Comparison of Anti-inflammatory, Skin Barrier Improvement, and Anti-aging Efficacy of Eleutherococcus divaricatus var. chiisanensis and various Eleutherococcus Genus Extract)

  • 한지원;남보미;이범석;고진아;황지영
    • 대한화장품학회지
    • /
    • 제48권4호
    • /
    • pp.373-383
    • /
    • 2022
  • 활성산소로 인한 염증 유발과 그로 인한 장벽손상은 꾸준히 주름생성의 원인으로 지목되어 왔다. 본 연구에서는 오갈피나무속에 속해있는 지리산오갈피와 가시오갈피, 오갈피나무, 오가나무 4종의 추출물에 대한 항산화, 항염증 및 피부 장벽개선, 항노화 관련 기능성 화장품 소재로서의 활용가치를 검증하고자 유효 지표성분 탐색과 효능 분석을 수행하였다. 먼저, 오갈피나무속 식물인 지리산오갈피와 가시오갈피, 오갈피나무, 오가나무 각각을 50% 에탄올을 용매로 추출, 농축, 동결건조 하여 시료를 제조하였다. 유효 지표성분탐색을 위해 주요 지표 성분인 eleutheroside E와 오갈피나무속에서 주로 검출되는 폴리페놀류 중 chlorogenic acid, caffeic acid 에 대하여 고성능 액체크로마토그래피를 통해 성분 함량을 측정하였으며, 오갈피나무속 중 지리산오갈피에서 eleutheroside E와 chlorogenic acid의 함량이 가장 높은 것을 확인하였다. 항산화활성은 DPPH 라디칼 소거활성이 지리산오갈피에서 가장 높았으며, 항염증 효능의 경우 LPS로 염증이 유발된 대식세포 내 NO 생성 억제 효능은 가시오갈피, 오가나무, 오갈피나무 추출물 100 ㎍/mL에서 각각 25%, 26%, 32% 일 때 지리산오갈피 추출물 100 ㎍/mL는 40% 억제 효능을 보였고 pro-inflammatory cytokine으로 알려진 IL-6 발현 억제 효능은 가시오갈피, 오가나무, 오갈피나무 추출물 100 ㎍/mL 농도에서 각각 20%, 36%, 23% 일 때 지리산오갈피 추출물 100 ㎍/mL는 41% 억제 효능을 보였다. 또한, 지리산오갈피 추출물 100 ㎍/mL에서 피부장벽 관련 인자인 filaggrin, involucrin의 발현이 각각 2.5 배, 1.6 배 증가되었으며, 주름관련 인자인 콜라겐분해효소는 29% 억제 효능을 나타내어 오갈피나무속 4 종 중 지리산오갈피는 피부의 염증 억제와 장벽강화, 주름개선용 화장품소재로써 활용가능하리라 판단된다.

디젤기관 실린더 블록의 보수용접법에 관한연구 (A Study on the Repair Welding Methods for Cylinder Block of Diesel Engines)

  • 김종호
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제23권3호
    • /
    • pp.331-337
    • /
    • 1999
  • Cracks on the cylinder block of diesel engines will often happen due to cyclic load and thermal stress. According to the Classification Societies' rules welding reparis of cylinder block made of cast irons are generally not permitted. However such welding repairs became inevitable taking enormous cost and time for their renewal into consideration. In this study repair welding methods for the clinder blocks made of gray cast irons were reviewed and the tests of their welds were carried out in order to purpose the repair welding meth-ods of packing seat and o-ring seat of cylinder block and apply them to the practice. The following conclusions are botained :1 The tensile strength of weld of cast iron more than that of base metal can be obtained by means of preheating keeping temperature above $100^{\circ}C$ between welding pass-es preventing slag inclusion peening and cramping weld metal by studs. 2. The suspected crack by a magnetic particle test due to different magnetic permeability can be identified which are not associated with a mechanical discotinuity.

  • PDF

Sputtering of Solid Surfaces at Ion Bombardment

  • Kang, Hee-Jae
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1998년도 제14회 학술발표회 논문개요집
    • /
    • pp.20-20
    • /
    • 1998
  • I Ion beam technology has recently attracted much interest because it has exciting t technological p아:ential for surface analysis, ion beam mixing, surface cleaning and etching i in thin film growth and semiconductor fabrication processes, etc. Es야~cially, ion beam s sputtering has been widely used for sputter depth profiling with x-photoelectron S spectroscopy (XPS) , Auger electron s$\pi$~troscopy(AES), and secondary-ion mass S야i따oscopy(SIMS). However, The problem of surface compositional ch없1ge due to ion b bombardment remains to be understo여 없ld solved. So far sputtering processes have been s studied by s따face an외ysis tools such as XPS, AES, and SIMS which use the sputtering p process again. It would be improbable to measure the modified surface composition profiles a accurately due to ion beam bombardment with surface analysis techniques based on sputter d depth profiling. However, recently Medium energy ion scattering spectroscopy(MEIS) has b been applied to study the sputtering of solid surface at ion bombardment and has been p proved that it has been extremely valuable in probing the surface composition 뻐d s structure nondestructively and quantita디vely with less than 1.0 nm depth resolution. To u understand the sputtering processes of solid surface at ion bombardment, The Molecular D Dynamics(MD) and Monte Carlo(MC) simulation has been used and give an intimate i insight into the sputtering processes of solid surfaces. In this presentation, the sputtering processes of alloys and compound samples at ion b bombardment will be reviewed and the MEIS results for the Ar+ sputter induced altered l layer of the TazOs thin film 뻐dd없nage profiling of Ar+ ion sputt얹"ed Si(100) surface will b be discussed with the results of MD and MC simulation.tion.

  • PDF

곤충병원선충(Steinernema carpocapsae Weiser)의 냉동저장법 (Cryopreservation of the Entomopathogenic Namatode, Steinernema carpocapsae Weiser)

  • 이승화;김용균;한상찬
    • 한국응용곤충학회지
    • /
    • 제39권3호
    • /
    • pp.149-152
    • /
    • 2000
  • 곤충변원성충(Steinernema carpocapsae Weiser)의 감염태 유충에 대한 액체질소( $-190^{\circ}C$)냉동 저장하는 방법을 개발하기 위하여, 냉동보관 전처리 과정 및 저장기간에 따른 선충생존율과 감염력 변이를 조사하였다. 냉동저장 전에 22% 글리세롤로 선충은 6, 12, 24시간 동안 배양한 후 70% methanol($0^{\circ}C$)안에 10분간 유지하였다. 글리세롤과 methanol에 넣어 둔 샘플을 0,85% 식염수에 넣어 24시간 유지한 후 생존능력을 측정하였다. 글리세롤 배양시간에 따른 선충 생존율의 차이는 없었으나, methanol처리에서는 글리세롤 처리 시간이 길수록 선충 생존율이 높게 나타났다. 냉동저장에 따른 선충의 생존율은 글리세롤 배양시간이 짧았던 처리(6시간)를 제외하고는 5개월 동안 평균 70% 이상으로 높게 나타났다. 냉동저장 되었던 선충의 곤충감염율은 저장기간에 관계없이 90% 이상을 나타내었다. 이상의 결과는 곤충병원선충이 냉동저장에 의해 장기간보존이 가능하다는 것을 제시한다.

  • PDF

Water balance change at a transiting subtropical forest in Jeju Island

  • Kim, JiHyun;Jo, Kyungwoo;Kim, Jeongbin;Hong, Jinkyu;Jo, Sungsoo;Chun, Jung Hwa;Park, Chanwoo;Kim, Yeonjoo
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2022년도 학술발표회
    • /
    • pp.99-99
    • /
    • 2022
  • Jeju island has a humid subtropical climate and this climate zone is expected to migrate northward toward the main land, Korea Peninsula, as temperature increases are accelerated. Vegetation type has been inevitably shifted along with the climatic change, having more subtropical species native in southeast Asia or even in Africa. With the forest composition shift, it becomes more important than ever to analyze the water balance of the forest wihth the ongoing as well as upcoming climate change. Here, we implemented the Ecosystem Demography Biosphere Model (ED2) by initializing the key variables using forest inventory data (diameter at breast height in 2012). Out of 10,000 parameter sets randomly generated from prior distribution distributions of each parameter (i.e., Monte-Carlo Method), we selected four behavioral parameter sets using remote-sensing data (LAI-MOD15A2H, GPP-MOD17A2H, and ET-MOD16A2, 8-days at 500-m during 2001-2005), and evaluated the performances using eddy-covariance carbon flux data (2012 Mar.-Sep. 30-min) and remote sensing data between 2006-2020. We simulated each of the four RCP scenarios (2.6, 4.5, 6.0, and 8.5) from four climate forcings (GFDL-ESM2M, HadGEM2-ES, IPSL-CM5A-LR, and MIROC5 from ISIMIP2b). Based on those 64 simulation sets, we estimate the changes in water balance resulting from the forest composition shift, and also uncertainty in the estimates and the sensitivity of the estimates to the parameters, climate forcings, and RCP scenarios.

  • PDF

중국.고대 돈황가중의 복식 연구 (A comparative study of the Dunhuang Costume on the Folk Song's words in Dnag's period of the China.)

  • 김은주
    • 복식
    • /
    • 제22권
    • /
    • pp.159-176
    • /
    • 1994
  • This study's purpose is to find the ancient costume of the folk song's words on Dunhuang manuscripts in the background wass-carvings sculptures and several art works. Dunhuang had played the part of major route between ancient China and Europe. It is located on kam-suksong the west of China. 1. In the aspect of costume arrangement hair Styling is represented by Naegagyo, Wangyesa, Kyongburak, Bonkwyun, Pogurak, Chonsonja, Namgaja, Tongson-ga, Ojesa, Chanboja in Dunhuang manuscripts. tugue is sim-ilar to Sabyokkwanja in Naegagyo as of that time these kinds of Kwan-ja was very popular. It was told that emperor's wife concubine and maid of honor would wear kwnaja favorably. And the kinds of Tugeu is PuyongKwyunkye, Aangunkye, Chunkye from Kyuwanjon except Sangunkye, Ounkye in Dunhuangsa. 2. Jangdaegy is guoted from Kyuw-anjon -A series of the chinese history book-tells us about women's make-up . The narmes of make-up are Hongjang Unjan--g, Yiljang chwejang, Tam-ajang Murgjang, Sanagjang, Light-make up are referred in Naegagyo is included as packjang Besides we can find other make-up skills Huphwaro and Rujang from the Kaewonch onbon-wisa which was Yangkwibi's episodes. We can find the a corpus of song's words about cosmetic custom in Kor-ea. Which is 'Haecho' folk song in the souther-en costal regions 'Jinggum' folk song in Kim-hae regions and so on.... It's words is similar to Dunhuangsa in China. 3. Bichun inherited to China with India Bud-dism art in the middle of Dunhuang wall-pain-tings is one of the important Buddist saint. Sometimes it is painted with Giakchun Its arms of fly-dnacing in heaven with colored belt on body has almost the form of play on the musical instrument, We can see seasily the form in the painting of Buddist ser-mon. It was progressed and changed with the background of chinese traditional culture. When Dang's period came the color was chan-ged lighting dark blue has rhythmical and viv-id power of life. 4. Among the corpus of song's words which express the singers' system and rites of their tradition or habits. Dunhuang manuscripts des-cribes on behalf of the folk song's words in tra-ditional costume. This is following: (1) Naegagyo o sabyokwanja o Chyrasam o Rashang (2) Wangyesa o Sokryugun o Costume for fisher man (3) Bungajang of the chanboja o Ajang (4) Pongkwyun o Chongui (5) Tongsongs o Junofore (6) Namgaja o thin-Rasam (7) Yuchungnang o Hongsam o Sokryugun : The color of red costume (8) Kyongburak o Hongrasam o Sokryugun : Costume for charming woman Therefore traditional costume could be extracted according to the Dunhuang folk song's words out of culture such as learning rit-es three-obedience four-virtues and in-struction. As the same time it reflects ancient China's characteristics directly. I would endeavor to development for the history of the costume furher creative design and participat-ed in research activity with concerns forward continuously.

  • PDF

자동화 방식 모델 기반 좌심방 파라미터 측정법: 수동 및 반자동 방식과의 비교 (Heart-Model-Based Automated Method for Left Ventricular Measurements in Cardiac MR: Comparison with Manual and Semi-automated Methods)

  • 채승훈;이활;박은아;정진욱
    • Investigative Magnetic Resonance Imaging
    • /
    • 제17권3호
    • /
    • pp.200-206
    • /
    • 2013
  • 목적: 자기공명 심장영상을 이용한 좌심실 파라미터 측정에 있어, 자동화 방식을 적용하였을 경우에 나타나는 효과를 분석하고 이를 수동 및 반자동 방식을 적용했을 경우 나타나는 결과와 비교하였다. 대상과 방법: 1.5T 자기공명 심장영상 촬영을 시행한 62명의 환자를 대상으로, 심장 주기당 20상의 단축 항정상태 자유세차 동영상과 심첨2방 및 심첨4방 영상을 얻었다. 심내막 경계와 심외막 경계를 수동, 자동, 반자동 방식으로 각각 구하여 이를 바탕으로 이완말기와 수축말기 용적, 박출 계수, 일회 박출량, 좌심실 질량을 계산하고 각 방식간 평균값 차이를 일원분산분석법을 이용 통계적 분석하였다. 결과: 이완말기와 수축말기 용적의 경우에는 세 방식으로 측정한 결과는 통계적으로 유의하게 다르지 않았다. (P = .399 and .145). 그러나, 박출 계수, 일회 박출량, 좌심실 질량의 경우에는 통계적으로 유의하게 다르게 나타났으며 (P=.001, < 001, < 001) 자동화 방식으로 측정한 측정치가 다른 두 방식에 비해 일관되게 큰 결과치를 보였다. 결론: 자동화 방식을 적용하여 측정한 좌심실의 박출 계수, 일회 박출량, 좌심실 질량의 측정치는 수동, 반자동 방식에 비해 과장된 값을 나타낸다. 자동화 방식으로 많은 노력을 절감할 수 있으나, 임상적으로 민감한 케이스에 대해서는 이에 더하여 수동적 교정을 고려해야 할 것이다.