• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.178-183
• /
• 2000

Electrorheological(ER) effect on the dispersive system of polarizable fine powder/dielectric oil has been investigated. The electrical and rheological properties of zeolite and starch based ER fluid were reported. The ER fluids were constructed by mixing zeolite and starch power with two different dielectric oils. Yield stress of the fluids were measured on the couette cell type rheometer as a function of electric fields, particle concetrations, and temperatures. The electric field is applied by high voltage DC power supply. The outer cup is connected to positive electrode(+) and the bob becomes ground(-). And the temperatures the viscosity(or shear stress) versus shear rates were measured. In this experiment shear rates were increased from 0 to $200s^{-1}$ in 2 minutes.

• Journal of the Korean Ceramic Society
• /
• v.37 no.2
• /
• pp.117-121
• /
• 2000

Er-doped sodiumborosilicate glass films for waveguides amplifier were fabricated by Aerosol Flame Deposition(AFD) method. Al2O3 was added to sodium borosilicate glass films to suppress the formation of crystalline phase and control the refractive index. the formation of crystalline phase was suppressed above Al2O3 of 6 wt%. As the amount of Al2O3 increased from 2 to 12 wt% the refractive index of glass films increased lineary from 1.4595 up to 1.4710. After the core of 77SiO2-15B2O3-8Na2O＋6 wt%Al2O3＋8wt%Er2O3 was coated on the buffer layer of 77SiO2-15B2O3-8Na2O＋6 wt%Al2O3, the core was etched by reactive ion etching. The absorption spectrum of 3 cm waveguide amplifier showed two peaks of 1530 and 1550 nm.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.452-457
• /
• 2000

This paper presents control response of a semi-active electro-rheological(ER) suspension. After showing dynamic characteristics of the ER damper, 1/4 car model is formulated by incorporating with the time constant of the damping force. $H_{\infty}$ controller compensating mass and time constant uncertainties is then designed in order to suppress vibration level of the suspension. The control responses such as vertical acceleration are presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.144-147
• /
• 2001

In ATM Network, many algorithms have been proposed for rate-based ABR flow control. The object of these algorithms is to turn around from cell loss and to use the unused bandwidth by ABR Traffic. These Algorithms are applied to control ABR Traffic by EFCI and ER switches. In this paper, we apply these algorithms to the various stale networks and analysis the characteristics of the algorithms and then attempt to show the loss rate of each algorithms. As the result we compare and analysis the efficiency of them.

• Journal of Photoscience
• /
• v.5 no.1
• /
• pp.33-37
• /
• 1998

One macroscopic effect in the free-running Er:YAG laser is an accumulation of microscopic effects. Understanding of the exogenous water induced mechanical effect on the dental hard tissue by the Qswitched Er:YAG laser has an important impact on the further understanding of the free-running Er:YAG laser ablation on the dental hard tissue. The Q-switched Er:YAG laser (1-$\mu$s-long pulse width) was used in the recoil pressure measurement with an aid of water-jet system and a pressure transducer. The amplitude of the recoil pressure depends on the tooth surface conditions (dry and wet) and the volume of the water upon it. Wet surfaces yielded higher recoil pressure than that of dry, surface, and as the volume of the exogenous water drop increased, the amplitude of the recoil pressure increased also.

• Korea-Australia Rheology Journal
• /
• v.13 no.4
• /
• pp.197-203
• /
• 2001

We reported on the eletrorheological (ER) properties of several semiconducting polymers including poly (p-phenylene) (PPP), poly (acene quinone) radicals (PAQRs), microencapsulated polyaniline (MPANI) and polyaniline (PANI) those we synthesized. The yield stress dependence on electric field strength for the ER fluids using these semiconducting polymers was mainly examined. The yield stress, which is an important design parameter for ER fluids, was observed to satisfy a universal scaling function, allowing that yield stress data for all the ER fluids examined in this study collapse onto a single curve for a broad range of electric field strengths. The proposed scaling function incorporates both the polarization and conductivity models.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.2
• /
• pp.178-183
• /
• 2002

The effects of Dy$_2$O$_3$and Er$_2$O$_3$addition on the electromagnetic properties of Mn-Zn ferrite were investigated in the doping concentration range from 0.05 wt% to 0.25 wt%. All samples were prepared by standard fabrication of ferrite ceramics. The XRD patterns of sample were observed spinel and secondary phase. The densities of sample were showed nearly constant values. As the increased additive, electrical resistivity, initial permeability and real component of the series complex permeability increased with setting limits each other. Excess doped with Dy$_2$O$_3$ and Er$_2$O$_3$, those values decreased. The maximum electrical resistivity was observed with 0.15 we% and initial permeability was observed with 0.05 wt%. Magnetic loss decreased with additive and then increased in proportion to increased.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.140-147
• /
• 1999

ABR uses the extra network resource more efficiently which uses not the guaranteed service in ATM and supports the best effort which the characteristics of application is bursty and maximum transfer rate is high. Switches for using ABR flow control differentiate EFCI switches (which supply only the congestion state information) from ER switches (which supply fair rate to source). This paper analyses the switches operation technique for efficiently managing ABR traffic in case which the network mixes EFCI switches and ER switches in ATM.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.887-894
• /
• 2000

In this paper, we have studied the effect of earth (Gd, Er) on the various properties (microstructure, shrinkage, initial permeability, permeability as a function of frequency, etc) of Ba-ferrite. The permeabilities were analyzed by Impedance Analyzer(100KHz~40MHz) and Network Analyzer(30KHz~3㎓). As the result of XRD, all of the Ba-ferrite doped with rat earth was found to be Y-hexagonal phase. The resonance frequencies at the maximum imaginary value of complex permeability were observed near 2㎓. The complex permeabilities of the Ba-ferrite doped with Gd$_2$O$_3$at 3wt% and doped with Er$_2$O$_3$at 3wt% and 5wt% as a function of frequency showed the highest value at sintered temperature at 95$0^{\circ}C$/3h.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.5-10
• /
• 2006

The objective of this paper is to investigate the Intelligence control characteristics of a digital damper. This paper deals with a two-degree-of-freedom suspension using the damper with ER fluid for a quarter vehicle system. The control law for semi-active suspensions modeled in this study is developed using passive and ANFIS control method. Computer simulation results show that the semi-active suspension with ER damper has good performances of ride quality.