• Environmental Analysis Health and Toxicology
• /
• v.18 no.1
• /
• pp.63-67
• /
• 2003

Benzoic acid is produced about 700 tons/year in Korea as of 1998 survey. Most is used as a stabilizer in the processes of synthesis of pharmaceuticals and dyes. It is also used for ingradient of paint, disinfections, and antifungals. Due to the antioxidant activity of benzoic acid, the chemical is also used as food preservatives. Although the chemical is widely used in Korea, exposure levels in air, water, soil or sediment have not been monitored or estimated so that risk evaluation of benzoic acid was not possible. In this study, distribution of the chemical among environmental media was estimated using EQC model based on the chemical-physical properties. In Level I and II of which the chemical are hypothesized in equilibrium and no transfer through the media, more than 93％ of benzoic acid are estimated to be distributed in water. However, in Level III of which non-equilibrium and intermedia transfer could be occurred, the chemical is estimated to distributed to soil, 64％ and water,35% as of total amount.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1090-1098
• /
• 2005

Benzoyl peroxide is very toxic to aquatic organisms but environmental concentration or exposure effects were not studied. Distribution of the chemical among multimedia environment was estimated using EQC(Equilibrium Criterion) model based on the physical-chemical properties to evaluate the risk of benzoyl peroxide in environment. Level I describes a situation that 100,000 kg of benzoyl peroxide is emitted into the environment which is equilibrium and steady-state without degradation and advection condition. Level II describes a situation that a constant rate of 1,000kg/h of benzoyl peroxide is continuously discharged into the environment which is equilibrium and steady-state with degradation and advection condition. Level III describes a situation that 1,000 kg/h of benzoyl peroxide is continuously introduced in each air, water, soil, and sediment compartment which are non-equilibrium and steady-state with degradation, advection, and inter-media transfer condition. In Level I and II calculations the chemical was distributed to soil(68.3%) and water(28.7%). In Level III calculation it was primarily distributed to soil(99.9%) and overall residence time was estimated to be 3.4 years. Benzoyl peroxide can be persistent in environment.

• Environmental Analysis Health and Toxicology
• /
• v.16 no.3
• /
• pp.133-137
• /
• 2001

Acetanilide is a High Production Volume Chemical, which is produced about 2,300 tons/year in Korea as of 1998 survey. Most is used as an intermediate for synthesis of pharmaceuticals and dyes and the chemical is one of seven chemicals of which human and environmental risks are being assessed by National Institute of Environmental Research under the frame of OECD SIDS program. The chemical is water soluble (4 g/1 at 20$\^{C}$) and readily biodegradable (68.7％). Partition coefficiency (Log Pow) is 1.16 at 23$\^{C}$ so that the chemical has a low potential for bioaccumulation. The acute toxicities of algae, daphnia and fish are not high. The 72 hr-EｂC50 of algae is 13.5 mg/1,48 hr-EC50 of daphnia is over 100 mg/1 and 96 hr-LC50 of Oryzias latipes is over 100mg/1. Regarding the exposure, levels in air, water, soil or sediment have not been monitored or estimated so that risk evaluation of acetanilide was not possible. In this study, distribution of the chemical among environmental media was estimated using EQC model based on the chemical-physical properties. In Level I and IIof which the chemical are hypothesized in equilibrium and no transfer through the media, more than 98％ of acetanilide are estimated to be distributed in water. However, in Level Ⅲ of which non-equilibrium and intermedia transfer could be occurred, the chemical is estimated to distributed to soil as 51.8％ and water as 47.8％ as of total amount.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.284-295
• /
• 2012

Abrasiveness of rock plays an important role on the wear of rock cutting tools. In this study, Cerchar abrasiveness tests were carried out to assess the abrasiveness of 19 different Korean rocks. Cerchar abrasiveness test is widely used to assess the abrasiveness of rock because of its simplicity and inexpensive cost. This study examines the relationship between Cerchar Abrasiveness Index (CAI) and mechanical properties (uniaxial compressive strength, Brazilian tensile strength, Young's modulus, Poisson's ratio, porosity, shore hardness of rock), and the effect of quartz content, equivalent quartz content, which was obtained from XRD analysis. As a result of test, CAI was more influenced by petrographical properties than by the bonding strength of the matrix material of rock. CAI prediction model which consisted of UCS and EQC was proposed. CAI decreased linearly with the hardness of the steel pin. Numerical analysis was performed using Autodyn-3D for simulating the Cerchar abrasiveness test. In the simulations, most of pin wear occurred during the initial scratching distance, and CAI increased with the increase of normal loading.