• Journal of Korean Society on Water Environment
• /
• v.39 no.4
• /
• pp.288-301
• /
• 2023

This study aims to identify benthic macroinvertebrate fauna inhabiting at the mountain valley stream (Mt. Cheonggye) in Korea and the relationship between physical environmental factors and biological indices. Benthic macroinvertebrates were collected at five locations on August 24 and October 14, 2020, and were identified as 4 phyla, 7 classes, 16 orders, 42 families, and 72 species. Dominance ranged from 0.38 to 0.59, diversity 2.81 to 3.75, richness 3.25 to 4.63, evenness 0.65 to 0.84, and %EPT (Ephemeroptera-PlecopteraTrichoptera) richness value 42% to 73%, respectively. All sites were evaluated as a very good status by mostly biological indices based on tolerance of indicator organisms in Korea. As a result of principal component analysis, biological indices are classified into species-level indices and higher cartegory-level indices according to the taxonomic level of the indicator organism considered in each index. As a result of canonical correspondence analysis, it was confirmed that current velocity was a major factor that increased species richness and classified biological indices according to taxonomic category level. Water depth was a major factor related to the community indices, and the deeper the water depth, the lower the diversity and the evenness.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.568-571
• /
• 2022

본 논문에서는 서술형 수학 문제의 자동 풀이 기술 개발을 위한 데이터 증강 기법인 MOO 를 제안한다. 서술형 수학 문제는 일상에서의 상황을 수학적으로 기술한 자연어 문제로, 인공지능 모델로 이 문제를 풀이하는 기술은 활용 가능성이 높아 국내외에서 다양하게 연구되고 있으나 데이터의 부족으로 인해 성능 향상에서의 한계가 늘 존재해 왔다. 본 논문은 이를 해결하기 위해 시중의 수학 문제들을 수집하여 템플릿을 구축하고, 템플릿에 적합한 풀이계획을 생성할 수 있는 중간 언어인 MOOLang 을 통해 생성된 문제에 대응하는 Python 코드 형태의 풀이와 정답을 생성할 수 있는 데이터 증강 방법을 고안하였다. 이 기법을 통해 생성된 데이터로 기존의 최고 성능 모델인 KoEPT를 통해 학습을 시도해본 결과, 생성된 데이터셋을 통해 모델이 원활하게 데이터셋의 분포를 학습할 수 있다는 것을 확인하였다.

• Journal of Embryo Transfer
• /
• v.13 no.2
• /
• pp.191-197
• /
• 1998

Immature nocytes and in VitrO matured Oocytes collected from the slaughtered Korean cattle were frozen slowly with 10% ethylene glycol+5% polyvinyl pyrolidine+0.05M trehalose (l0EPT), 10% ethylene glycol+5% ficoll+0.05M sucrose (1OEFS), or 10% ethylene glycol+5% ficoll+0.05M trehalose (l0EFT) by cell freezer (experiment 1). And also,They were ultra-rapidly frozen with 30% ethylene glycol+10% polyvinyl pyrolidine+0.5M trehalose (3OEPT) or 30% ethylene glycol+18% ficoll+0.5M sucrose (3OEFS) using electron microscope grid (experiment 2). In experiment 1, the cleavage rate was 23.0% when immature oocytes were frozen slowly using various cryoprotectants descrihed above, and 5.1% of cleaved oocytes developed to over morula stage after in Vitro fertilization (IVF). There were no significant differences among these groups. When matured oocytes were frozen slowly, the total cleavage rate was 19.7%, and over morula stage was 3.2%. lOEPT (4.8%) and EFS (4.4%) were slightly more effective than l0EFT (0.0%) for development in vitro. Only in l0EFT treated group, immature oocytes have higher developmental capacity than matured ones, when they were frozen slowly and IVF after thawing. In experiment 2, oocytes were ultra-rapidly frozen using the electron microscope grid with two kind of cryoprotectants described above. In immature oocyte group, the cleavage rate was 13.9% and 5.8% of cleaved oocytes developed to over morula stage after IVF, and in matured group, 25.7 and 7.6%, respectively. There were no significant differences between two kind of cryoprotectants, but in ultra-rapid freezing using electron microscope grid, the efficiency is slightly higher in matured oocyte group.

• Journal of Environmental Science International
• /
• v.27 no.6
• /
• pp.383-399
• /
• 2018

In the present study, the community distribution, functional feeding groups, and habitat groups of the benthic macroinvertebrates from Gayasan National Park were investigated at eight different sites from 2015 to 2016. The correlation between habitat altitude and each group type was analyzed statistically. Biodiversity indices, including dominance, diversity, richness, and evenness indices, were calculated. The results showed a total of 4,216 individual benthic macroinvertebrates were collected, including 4 phyla, 6 classes, 16 orders, 40 families, and 100 species. Gammarus sobaegensis was dominant with 0.141% dominance, and the subdominant species was Epeorus nipponicus with 0.088% dominance. The EPT group(Ephemeroptera, Plecoptera and Tricoptera) accounted for 71.00% of the total species and 67.69% of the total individuals. The number of scraper species was highest, and the number of gathering collector individuals was highest among functional feeding groups. The individual number of scrapers(r=-0.358, p < 0.05) and gathering collectors(r=-0.343, p < 0.05) decreased with increasing altitude. The numbers of species and individuals of clingers and sprawlers were highest among the habitat groups. The individual number of clingers(r=-0.547, p < 0.01) and burrowers(r=-0.331, p < 0.05) significantly decreased with increasing altitude. The diversity and richness indices were higher in St. 3 than in the other sites. The dominance index was highest in St. 2, and the evenness index was highest in St. 7. We evaluated the biological water quality with several known methods, and concluded that ESB(Ecological score of benthic macrovertebrates community) and GPI(Group polution index) were more suitable than KSI(Korean saprobic index) and BMI (Benthic macrovertebrate index) to assess the biological water quality of Gayasan mountain stream water.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.5
• /
• pp.507-513
• /
• 2000

Objective : The purpose of this study is to evaluate the vitality of the teeth in and adjacent to the mandibular fracture line according to variable conditions of fracture and to establish the protocol of treatment of fracture line teeth. Materials and Methods : The vitality of 97 teeth in fracture line and 104 teeth adjacent to fracture line of 52 patients were invested preoperatively. Of these, 66 teeth in fracture line and 72 teeth adjacent to fracture line were monitored at least 6 months after operation. An electric pulp tester was used to measure pulpal response. The relationships between the vitality of teeth in variable time(preoperation, immediate post-operation; within 1 week after operation, and 6 months after operation) and variable conditions of fracture(horizontal, vertical gap of fracture line, the number of fracture line)were evaluated statistically. Result : The vitality of fracture line teeth in the 6 months after operation statistically differed by the vertical gap of fracture line and the number of fracture line. The vitality of fracture line adjacent teeth in the immediate post-operation only statistically differed by the vertical gap of fracture line. There were statistically differences between preoperative EPT value and vitality of fracture line teeth on 6 months after operation. There were 5 cases of complications including periapical and periodontal abscess. Of these, only one tooth was extracted and the others were well treated with endodontic treatment and subgingival curettage. Conclusion : It is recommended to retain teeth and to monitor the vitality of teeth in and adjacent to fracture line, unless there is an absolute indication for extraction.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.4
• /
• pp.300-307
• /
• 2018

PURPOSE. To investigate the fatigue and fracture resistance of computer-aided design and computer-aided manufacturing (CAD/CAM) ceramic molar crowns on dental implants and human teeth. MATERIALS AND METHODS. Molar crowns (n=48; n=8/group) were fabricated of a lithium-disilicate-strengthened lithium aluminosilicate glass ceramic (N). Surfaces were polished (P) or glazed (G). Crowns were tested on human teeth (T) and implant-abutment analogues (I) simulating a chairside (C, crown bonded to abutment) or labside (L, screw channel) procedure for implant groups. Polished/glazed lithium disilicate (E) crowns (n=16) served as reference. Combined thermal cycling and mechanical loading (TC: $3000{\times}5^{\circ}C/3000{\times}55^{\circ}C$; ML: $1.2{\time}10^6$ cycles, 50 N) with antagonistic human molars (groups T) and steatite spheres (groups I) was performed under a chewing simulator. TCML crowns were then analyzed for failures (optical microscopy, SEM) and fracture force was determined. Data were statistically analyzed (Kolmogorow-Smirnov, one-way-ANOVA, post-hoc Bonferroni, ${\alpha}=.05$). RESULTS. All crowns survived TCML and showed small traces of wear. In human teeth groups, fracture forces of N crowns varied between $1214{\pm}293N$ (NPT) and $1324{\pm}498N$ (NGT), differing significantly ($P{\leq}.003$) from the polished reference EPT ($2044{\pm}302N$). Fracture forces in implant groups varied between $934{\pm}154N$ (NGI_L) and $1782{\pm}153N$ (NPI_C), providing higher values for the respective chairside crowns. Differences between polishing and glazing were not significant ($P{\geq}.066$) between crowns of identical materials and abutment support. CONCLUSION. Fracture resistance was influenced by the ceramic material, and partly by the tooth or implant situation and the clinical procedure (chairside/labside). Type of surface finish (polishing/glazing) had no significant influence. Clinical survival of the new glass ceramic may be comparable to lithium disilicate.

• International Journal of Knowledge Content Development & Technology
• /
• v.9 no.4
• /
• pp.7-29
• /
• 2019

The study was carried out to investigate the influence of demographics and social media use on perceived academic stress of secondary school students in St. Thomas Aquinas College, Akure, Nigeria. This was achieved using five research questions and four null hypotheses. The population of the study consisted of 1,107 students at ISCED level 3, out of which 286 were selected based on the Israel (2003) model for determining sample size. The Ex-Post Facto (EPT) research design of the correlational type was employed to investigate the study while questionnaire was used for data elicitation. Out of the 286 copies distributed, 192 (67% response rate) were retrieved and analyzed using descriptive statistics (frequency, percentage, mean and standard deviation) and inferential statistics (correlation and multiple regression). The findings revealed that there is high frequency of social media use among secondary school students, majorly for meeting new friends and chatting. The perceived academic stress (PAS) of the students was found to be moderate. Of the three demographics considered, only class had significant influence on PAS. Use of social media did not have significantly influence on PAS of the students. When combined, demographics and social media use predicted PAS; and when considered relatively, of the independent variables, only class as an aspect of demographics predicted PAS. Therefore, the authors concluded that PAS of secondary school students is not directly influenced by demographics (except for class) and social media use. Based on the study's conclusion, recommendations were made.

• Convergence Security Journal
• /
• v.15 no.4
• /
• pp.27-33
• /
• 2015

In this paper, the development level of information security technology for internet of things(Iot), big data and clo ud services is analyzed, and the detail policy is proposed to be leader in area of patents and ICT standard. The conc ept of ICT convergence is defined frist, market and current state of technology for three convergence services is the n analyzed, and finally main function and security target for each technology are presented. The evaluation criteria a nd IPR are analyzed to diagnose the level of patent and standard for the technology. From the results, even though the domestic competence is inferior compared to other advanced country, the efficient policy should be presented by using our capability for the big data and cloud. Furthermore, the technology development for the IoT and cloud is ne eded in advance considering the market-technology influence effects. In addition to, M2M security framework in IoT, data security in big data and reliable networking in cloud should be developed in advance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.10-20
• /
• 2013

Because of the defect in design, damage in using period, and deterioration in long term exposure to severe environmental condition, degradation of performance in RC (Reinforced Concrete) structures has occurred. This paper contains durability performance evaluation in railway bridges which covers eight districts through field investigation. For the target structures, durability performance is evaluated and the critical problems in use are derived. Additionally, service lifes for the deteriorated structures are evaluated through Durability-Environment index method based on the results from field investigation, and the results are compared with those from the condition assuming the structures without defect, damage, and deterioration. The target structures which consist of RC T girder, PSC girder, RC box, and Rahmen are investigated and the critical damage patterns are derived. They are evaluated to be cracks in PSC girder end, flexural cracks in PSC girder, crack around EPT anchor, and flexural cracks in RC T girder and RC box. The reasons for the critical patterns are also investigated. This study can be utilized for the repair planning considering the different district and the structure types.

• Journal of Environmental Science International
• /
• v.25 no.5
• /
• pp.655-671
• /
• 2016

The distribution characteristics of functional feeding groups and biological evaluation of water quality with benthic macroinvertebrates were investigated from 2013 to 2014 in the mountain streams of Jirisan National Park. Both quantitative and qualitative collection had been performed six times during study periods in twelve sites located at upstream, midstream and downstream of four valleys, Chilsungol, Baemsagol, Daesunggol and Piagol of freshwater ecosystem in Jirisan National Park. As results, the total collected benthic macroinvertebrates were 3 phyla, 4 classes, 11 orders, 37 families, 107 species and 4,028 individuals. In 2013, 3 phyla, 4 classes, 10 orders, 32 families, 89 species and 1,829 individuals were collected. And in 2014, 3 phyla, 4 classes, 9 orders, 31 families, 80 species and 2,199 individuals were identified. The total dominant species was Ecdyonurus kibumensis, and EPT groups occupied 80.39% of total species number. Biotic indices were also compared to site and to season. The dominant index (DI) was highest at the downstream of Baemsagol in the spring of 2013, and the evenness index (J') was highest at the downstream of Daesunggol in the summer of 2013. Both diversity index (H') and richness index (RI) were highest at the upstream of Baemsagol in the summer of 2014. The correlation between altitude above sea level and functional feeding groups of benthic macroinvertebrates was also researched in this study. As a result, the species number of shredders and predators have significantly increased according to the increase of the altitude of their habitat. On the other hand, individuals of gathering collectors have increased according to the increase of altitude. The biological water quality was evaluated and compared with several methods in this study, and we suggest that ESB and GPI are more appropriate than KSI and BMI to evaluate biological water quality of mountain stream water.