• 제목/요약/키워드: EO Parameters

검색결과 78건 처리시간 0.023초

SmartBase를 활용한 Direct Georeferencing 기반의 외부표정요소 결정 (Decision Of EO Parameters Based On Direct Georeferencing Using SmartBase)

  • 이용욱
    • 한국측량학회지
    • /
    • 제31권2호
    • /
    • pp.135-142
    • /
    • 2013
  • 최근 상시관측소와 네트워크 기반 RTK를 활용하여 GPS/INS를 해석하고 이를 통해 항공사진측량에 필요한 외부표정요소를 획득하는 방법은 널리 알려져 있다. 본 연구에서는 외부표정요소를 계산함에 있어 지상기준국을 활용하는 방법과 상시관측소과 방송력 및 IGS 정밀력을 결합해 SmartBase를 이용하는 방법, 각각의 상시관측소를 이용하는 방법을 비교하였으며, 지상기준국으로 계산한 성과를 기준으로 외부표정요소의 잔차를 계산하였다. 그 결과 SmartBase를 활용하여 외부표정요소를 획득한 경우는 상시관측소만을 활용한 경우보다 X, Y, K에서 더 높은 정확도를 획득할 수 있었다. 또한 지상기준국을 중심으로 상시관측소의 거리와 방향이 외부표정요소에 영향을 미치며, 항공사진 코스에 따라 각각 다른 형태의 잔차가 나타남을 알 수 있었다.

CPA 상태방정식에 의한 회합성 유체의 PVT 관계 (PVT Relations of Associating Fluids using the Cubic-Plus-Association EoS)

  • 김미경;심민영;김기창
    • 산업기술연구
    • /
    • 제20권A호
    • /
    • pp.195-202
    • /
    • 2000
  • For modeling an equation of state suitable for describing associating fluids, we combined the cubic equation of state (Peng-Robinson) and an association term of SAFT. The resulting EoS (Cubic-Plus-Association) is not cubic with respect to volume and contains five pure compound parameters. Excellent correlations of both vapour pressures and saturated liquid volumes were obtained for n-alcohols and secondary alcohols. We considered a method for reducing the number of adjustable pure compound parameters from five to three, and the resulting 3-parameters EoS relation maintained the good correlation of vapour pressures and saturated liquid volumes.

  • PDF

Boresight calibration을 이용한 외부표정요소 산출에 관한 연구 (A study on the transformation of EO parameters using Boresight calibration)

  • 박수영;윤여상;김준철;정주권;주영은
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2003년도 추계학술발표회 논문집
    • /
    • pp.129-134
    • /
    • 2003
  • Mobile Mapping System needs system calibration of multi sensors. System calibration is defined as determination of spatial and rotational offsets between the sensors. Especially, EO parameters of GPS/INS require knowledge of the calibration to camera frame. The calibration parameters must be determined with the highest achievable accuracy in order to get 3D coordinate points in stereo CCD images. This study applies Boresight calibration for the calibration between GPS/INS and camera, and estimates the Performance of the calibration.

  • PDF

Optical Interferometric Characterization of Nonlinear Optical Polymer Thin Films

  • Wu, J.W.
    • 한국진공학회지
    • /
    • 제7권s1호
    • /
    • pp.149-155
    • /
    • 1998
  • The linear electro-optic (EO) effect is one of the second-order nonlinear optical effects existing in a noncentrosymmetric macroscopic system. In a polymer thin film, the noncentrosymmetry is achieved by electric field poling. The magnitude of the linear EO response is determined through the orientational distribution function of hyperpolarizable molecular dipoles. The relation between the linear EO coefficient and the second-order nonlinear optical susceptibility is explained. Three different methods of measuring the linear EO coefficient of a poled nonliner optical polymer thin film are introduced and discussed. All of them make use of the interferometric technique, the difference being in the optical parameters which are interfering.

  • PDF

ESA Earth Observation Programmes and International Cooperation in the frame of Third Party Missions

  • Hoersch B.;Laur H.;Kohlhammer G.
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
    • /
    • pp.598-600
    • /
    • 2004
  • In Europe most Earth Observation (EO) data users rely on several EO missions, both to increase sustainability of their service and to widen the range of observation parameters. In addition to its own missions such as ERS 1 &2, ENVISAT and the Earth Explorers, ESA therefore offers access to the scientific and applications community to so-called 'Third Party Missions'. Third Party (TP) missions are complementing the observations of ESA missions, are used to prepare for future ESA missions including cross-calibration and create synergy to favor a wider use of EO data within ESA Member States.

  • PDF

Optimized ANNs for predicting compressive strength of high-performance concrete

  • Moayedi, Hossein;Eghtesad, Amirali;Khajehzadeh, Mohammad;Keawsawasvong, Suraparb;Al-Amidi, Mohammed M.;Van, Bao Le
    • Steel and Composite Structures
    • /
    • 제44권6호
    • /
    • pp.867-882
    • /
    • 2022
  • Predicting the compressive strength of concrete (CSoC) is of high significance in civil engineering. The CSoC is a highly dependent and non-linear parameter that requires powerful models for its simulation. In this work, two novel optimization techniques, namely evaporation rate-based water cycle algorithm (ER-WCA) and equilibrium optimizer (EO) are employed for optimally finding the parameters of a multi-layer perceptron (MLP) neural processor. The efficiency of these techniques is examined by comparing the results of the ensembles to a conventionally trained MLP. It was observed that the ER-WCA and EO optimizers can enhance the training accuracy of the MLP by 11.18 and 3.12% (in terms of reducing the root mean square error), respectively. Also, the correlation of the testing results climbed from 78.80% to 82.59 and 80.71%. From there, it can be deduced that both ER-WCA-MLP and EO-MLP can be promising alternatives to the traditional approaches. Moreover, although the ER-WCA enjoys a larger accuracy, the EO was more efficient in terms of complexity, and consequently, time-effectiveness.

DMC 카메라의 블록기하 안정성 분석 (Stability Analysis of DMC's Block Geometry)

  • 이재원;이동민
    • 대한토목학회논문집
    • /
    • 제29권6D호
    • /
    • pp.771-779
    • /
    • 2009
  • GIS의 자료기반이 되는 수치지도는 주로 재래식 항공사진측량에 의해서 제작되고 있다. 따라서 촬영된 아날로그 항공사진은 필름의 현상, 인화, 스캐닝 작업 과정을 거쳐 수치지도 제작에 이용되고 있다. 하지만 디지털 항측카메라의 개발로 촬영된 사진의 전처리과정 없이 직접 디지털 영상의 획득이 가능하여 항공사진의 효율성이 극대화 되고 있는 실정이다. 본 연구 에서는 면형방식 카메라인 DMC(Digital Modular Camera) 영상의 블록구성에 따른 기하적 안정성을 검증하기 위하여 횡스트립의 유무, GPS/INS 외부표정요소의 유무 및 지상기준점 수를 달리한 조건으로 블록조정을 수행하였다. 각 조건별 블록조정의 결과로 부터 외부표정요소에 대한 잔차의 변화를 계산하여 정확도를 상호 비교하였다. 연구 결과 횡스트립 추가 시 블록은 기하학적으로 약 30% 안정함을 알 수 있었고, 외부표정요소에서는 횡스트립 추가 시 표준편차의 평균에서 X축으로 2cm, Y축으로 3cm, Z축으로 3cm 더 우수하였으며, omega는 6", phi는 4", kappa는 3" 더 우수하게 나타났다.

Absolute Atmospheric Correction Procedure for the EO-1 Hyperion Data Using MODTRAN Code

  • Kim, Sun-Hwa;Kang, Sung-Jin;Chi, Jun-Hwa;Lee, Kyu-Sung
    • 대한원격탐사학회지
    • /
    • 제23권1호
    • /
    • pp.7-14
    • /
    • 2007
  • Atmospheric correction is one of critical procedures to extract quantitative information related to biophysical variables from hyperspectral imagery. Most atmospheric correction algorithms developed for hyperspectral data have been based upon atmospheric radiative transfer (RT) codes, such as MODTRAN. Because of the difficulty in acquisition of atmospheric data at the time of image capture, the complexity of RT model, and large volume of hyperspectral data, atmospheric correction can be very difficult and time-consuming processing. In this study, we attempted to develop an efficient method for the atmospheric correction of EO-1 Hyperion data. This method uses the pre-calculated look-up-table (LUT) for fast and simple processing. The pre-calculated LUT was generated by successive running of MODTRAN model with several input parameters related to solar and sensor geometry, radiometric specification of sensor, and atmospheric condition. Atmospheric water vapour contents image was generated directly from a few absorption bands of Hyperion data themselves and used one of input parameters. This new atmospheric correction method was tested on the Hyperion data acquired on June 3, 2001 over Seoul area. Reflectance spectra of several known targets corresponded with the typical pattern of spectral reflectance on the atmospherically corrected Hyperion image, although further improvement to reduce sensor noise is necessary.

고무와 압전작동기를 이용한 무인항공기 EO/IR 센서 마운트의 설계 및 능동 진동 제어 (Design and Active Vibration Control of UAV EO/IR Sensor Mount Using Rubber Element and Piezoelectric Actuator)

  • 박동현;최승복
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 추계학술대회논문집
    • /
    • pp.743-748
    • /
    • 2008
  • This paper presents an inertia type of piezostack based active mount for unmanned aero vehicle (UAV) camera system. After identifying the stiffness and damping properties of the rubber element and piezostack a mechanical model of the active mount system is established. The governing equation of mount is them derived and expressed in a state space farm. Subsequently, a sliding mode controller which is robust to uncertain parameters is designed in order to reduce the vibration imposed according to the military specification associated with UAV camera mount system operation. Control performances such as acceleration and transmitted force are evaluated through both computer simulation and experimental implementation.

  • PDF

ORTHORECTIFICATION OF A DIGITAL AERIAL IMAGE USING LIDAR-DRIVEN ELEVATION INFORMATION

  • Yoon, Jong-Suk
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
    • /
    • pp.181-184
    • /
    • 2008
  • The quality of orthoimages mainly depends on the elevation information and exterior orientation (EO) parameters. Since LiDAR data directly provides the elevation information over the earth's surface including buildings and trees, the concept of true orthorectification has been rapidly developed and implemented. If a LiDAR-driven digital surface model (DSM) is used for orthorectification, the displacements caused by trees and buildings are effectively removed when compared with the conventional orthoimages processed with a digital elevation model (DEM). This study sequentially utilized LiDAR data to generate orthorectified digital aerial images. Experimental orthoimages were produced using DTM and DSM. For the preparation of orthorectification, EO components, one of the inputs for orthorectification, were adjusted with the ground control points (GCPs) collected from the LiDAR point data, and the ground points were extracted by a filtering method. The orthoimage generated by DSM corresponded more closely to non-ground LiDAR points than the orthoimage produced by DTM.

  • PDF