• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.74-81
• /
• 2004

In this study, static end loading tests with load transfer measurement were accomplished for large diameter drilled shaft constructed in fault zone. Yield pile capacity (or ultimate pile capacity) from load-settlement curve was determined and axial load transfer behavior was measurd. The end bearing capacity was increased 2 times due to grouting the toe ground under pile base.

• Journal of Welding and Joining
• /
• v.10 no.4
• /
• pp.240-249
• /
• 1992

The objective of this study is to investigate the characteristics of welded joints on the Zircaloy-4 resistance upset welding for HWR(Heavy Water reactor)fuel rods. To estimate the characteristics of welded joints, the various tests were performed on the test coupons systematically with a wide range of each welding parameters in terms of a tensile test, burst test, knoop hardness test and metallography. Major results obtained in this study are as follows: 1. The tube and machined with 120.deg. projection was the reliable weld joint design for the nuclear fuel rod end cap welding. 2. As the weld current and the amount of upset increased linearly with increasing welding main heat input, it could make an estimate of their variation in accordance with the phase shift control. 3. It was found that an increase in squeeze force has an effect on the upset contour of welded joint because the amount of upset were increased by the change of squeeze force.

• The Korean Journal of Emergency Medical Services
• /
• v.20 no.3
• /
• pp.107-120
• /
• 2016

Purpose: The purpose of this study was to investigate the factors influencing death anxiety, hospices knowledge, and attitude towards end-of-life care among paramedic students. Methods: A self-reported questionnaire was completed by 196 paramedic students in D university college in J city from November 2011 to November 2014. The study instruments included death anxiety, hospices knowledge, and attitude towards end-of-life care. Data were analyzed by t test, ANOVA, post hoc $Scheff{\acute{e}}$ test, Pearson's correlation test, and stepwise multiple regression analysis using SPSS v. 20.0. Results: According to a stepwise regression on the factors influencing attitudes towards end-of-life care, 80.4% of variance (F=161.360, p<.001) was explained by experience of death, hospices knowledge, disappearance of death anxiety, satisfaction with relationships (${\geq}2$) and student attitude toward end-of-life care. In addition, 44.1% of the variance (F=39.434, p<.001) was explained by experience of death, satisfaction with relationship(${\leq}4$), warning of others about death anxiety, and family attitude towards end-of-life care. Conclusion: The attitude towards end-of-life care was influenced by hospices knowledge and death anxiety in paramedic students. It is necessary to provide training in understanding attitudes towards death anxiety and end-of-life care. An effective educational program should be developed and implemented among paramedic students to improve their awareness of death and anxiety hospices knowledge.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1486-1494
• /
• 2021

Character recognition is a technology required in various platforms, such as smart parking and text to speech, and many studies are being conducted to improve its performance through new attempts. However, with low-quality image used for character recognition, a difference in resolution of the training image and test image for character recognition occurs, resulting in poor accuracy. To solve this problem, this paper designed an end-to-end learning neural network that combines image super-resolution and character recognition so that the character recognition model performance is robust against various quality data, and implemented an alternative whole learning algorithm to learn the whole neural network. An alternative end-to-end learning and recognition performance test was conducted using the license plate image among various text images, and the effectiveness of the proposed algorithm was verified with the performance test.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.159-166
• /
• 2000

Non-destructive out-hole tests, impact-echo and impact-response are widely applied to evaluate integrity of drilled shafts. In these tests, vibratory motions of drilled shafts are interpreted, which induced by impacts on the shaft head. In applying the tests to evaluating integrity of shaft, it has been attended whether the tests have resolutions enough to distinguish existence of slime at between the shaft end and a bearing soil deposit. To distinguish existence of slime by tests, modes of shaft vibrations need to be reasonably interpreted, which generally vary according to a shaft boundary condition such as, a free-free or a free-fixed condition. The boundary condition of a shaft is, however, found to be significantly affected by stiffness of soil deposits around shaft as well as penetration depths of shaft into a bearing soil deposit. Thus, these effects on the boundary condition of a shaft should be considered reasonably in interpreting test results to decide the existence of slime. To investigate the effects, in this study, vibratory motions of shafts constructed in various soil conditions and end penetration depths are examined analytically. Based on the studies, variations of boundary condition are characterized in terms of soil stiffness contrast between a shaft perimeter and a shaft end, and also the ratio of a penetration depth to a shaft length. The results can be applied to verify the applicability of tests to identify the slime.

• Journal of Hospice and Palliative Care
• /
• v.21 no.4
• /
• pp.124-136
• /
• 2018

Purpose: This descriptive study is aimed at identifying how nursing hospital workers' performance of end-of-life care is influenced by their knowledge and awareness of hospice palliative care, attitude towards end-of-life care, performance, importance, awareness of death and the factors. Methods: A self-reported questionnaire was used to collect data from 113 workers at an accredited nursing hospital in K province. Variables were their knowledge and awareness of hospice palliative care, attitude towards end-of-life care, end-of-life care performance and importance and awareness of death. An analysis was performed with the frequency, percentage, mean, standard deviation, t-test, ANOVA, Scheffe's test, Pearson's correlation coefficient and multiple regression using IBM SPSS 21.0. Results: The factors affecting the nursing hospital workers' end-of-life care performance were the importance of end-of-life care and their marital status, which showed an explanatory power of 38.2%. Conclusion: In order to improve the nursing hospital workers' end-of-life care performance, a training on the importance of end-of-life care should be provided. Therefore, we would like to propose establishing administrative measures such as 1) efficient staffing to help the caregivers better perform what they think is important, 2) development of a training program that can improve their performance of end-of-life nursing care and 3) a study to verify the effectiveness of the program.

• Steel and Composite Structures
• /
• v.19 no.5
• /
• pp.1185-1201
• /
• 2015

The aim of this experimental research is to investigate the conformity of the four-bolt unstiffened moment end-plate connections consisting of European steel sections which do not meet the limitations specified for beam flange width and overall beam depth in ANSI/AISC 358-10 to the requirements of seismic application. However, the connections are satisfactory with the limitations required by Turkish Earthquake Code. For this purpose, four test specimens were designed and cyclic load was applied to three specimens while one was tested under monotonic loading to provide data for the calibration of the analytical models. The moment-rotation hysteresis loops and the failure modes for all test specimens are presented. A full three-dimensional finite element model is also developed for each test specimen for use to predict their behavior and to provide a tool for generating subsequent extensive parametric studies. The test results show that all specimens performed well in terms of rotation capacity and strength. Finite element models are found to be capable of approximating the cyclic behavior of the extended end-plate connection specimens.

• Journal of Hospice and Palliative Care
• /
• v.24 no.3
• /
• pp.154-164
• /
• 2021

Purpose: The purpose of this study was to examine the effects of a death preparation education program for nurses working in convalescent hospitals on death anxiety, death attitudes, and attitudes toward end-of-life care. Methods: This was a quasi-experimental study with a non-equivalent control group, pre-test and post-test design. Among 53 participants, 26 were assigned to the non-equivalent experimental group and 27 to the control group. The program was performed in the formats of lectures, video-watching, group discussions, and sharing, and consisted of 10 sessions held twice a week, for 5 weeks (90 minutes per session). Data were analyzed using descriptive statistics, the t-test, and the chisquare test in SPSS version 21.0. Results: Significant differences between the experimental and control groups were observed in death anxiety (t=7.62, P<0.001), death attitudes (t=-7.58, P<0.001), and attitudes to end-of-life care (t=-10.30, P<0.001). Conclusion: It was confirmed that the death preparation education program reduced death anxiety and had a positive effect on death attitudes and attitudes toward end-of-life care. Based on the results of this study, it is expected that specialized and systematic education that can increase the implementation and stability of death preparation education in various fields, including nursing, will have a positive effect on both hospice patients and members of society more broadly.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.3
• /
• pp.123-130
• /
• 2021

PURPOSE: Robotic gait training is being used increasingly to improve the gross motor performance and gait speed. The present study examined the effectiveness of a novel end-effector type of robotic gait training (RGT) system on standing, walking, running, and jumping functions, as well as the gait speed in children with spastic cerebral palsy. METHODS: Eleven children with spastic cerebral palsy Gross Motor Function Classification System (GMFCS) levels I-III (6 males; age range, 15.09 ± 1.44 years) were examined. They underwent 24 sessions (30 minutes/sessions, one time/day, three days/week for eight consecutive weeks) of RGT. The Gross Motor Function Measure-88 D domain (GMFM D), and GMFM E were assessed with a pretest and posttest of RGT. The setting was a one-group pretest-posttest design. RESULTS: A comparison of the pre-test and post-test show that the outcomes in post-test of GMFM D (p < .01), GMFM E (p < .05), and 10MWT were improved significantly after RGT intervention. CONCLUSION: The present study provided the first evidence on the effects of an eight-weeks RGT intervention in participants with spastic CP. The outcomes of this clinical study showed that standing performance, locomotion function, and gait speed increased in after 24 sessions of the end-effector RGT system in children with spastic cerebral palsy.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.109-119
• /
• 2018

The purpose of this study is to evaluate the structural safety of the front-end loader for the 90 kW class of agricultural tractors in impact test conditions. Deformation and stress on the loader under the impact test conditions are analyzed using the commercial finite element analysis software ANSYS. In previous research dealing with the initial design of the loader, the maximum stress occurred in the mount and exceeded the yield strength of the material. In this paper, an improved design of the mount of the loader was proposed to reduce the stress concentration in the initial design. The safety of the improved design was verified by performing rigid-body dynamics analysis, transient structural analysis, and static structural analysis under three impact test conditions: a drop and catch test, a corner pull test, a corner push test. It was found that the local stress concentration in the mount that appeared in the initial design was greatly reduced in the improved design, and that the maximum stresses occurred in the three impact test conditions are smaller than the yield strength. It is expected that the design improvement of the mount proposed in this study and the method of analysis may be effectively used to enhance structural safety in the development of new model front loaders in the future.