• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.352-358
• /
• 2005

This study aims to separate hydrograph into baseflow and event water to calculate baseflow rate during a rainfall in small catchments, Yuseong, Daejeon, The hydrograph of stream during a period with no excess rainfall will decay. The discharge is composed entirely of groundwater contributions. During the period, the Cl concentration of the stream water can be regarded as being in equilibrium with that of the groundwater. Using Cl as a conservative tracer, two-component hydrograph separations were performed from end point of the period to next end point. The required data were obtained by monitoring of the surface water table, along with discharge rate of stream. Cl concentration of rainfall, surface water were measured and recorded. Hydrograph separation, a mixing model using chemical tracer is applied to chemical hydrograph separation technique. These results show that baseflow rates are 31.6% of rainfall in the catchments during study period.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.6
• /
• pp.93-102
• /
• 2014

The aim of this study is to analyze the influence of various factors on energy consumption of apartment buildings. Energy consumption data of the Green Together, integrated building energy management system maintained by the government were used, and end-use and primary energy consumption data of 2012 were analyzed for 181 apartment complexes completed between 2004 and 2011 in Seoul. Energy consumption by use, source and heating type were analyzed. Then, energy consumption trends were analyzed and suggested according to energy efficiency ratings, number of households, areas for exclusive use, number of floors, core types, building types, orientations and completion years.

• Journal of the Korean Home Economics Association
• /
• v.36 no.3
• /
• pp.77-86
• /
• 1998

The aims of this study show the purpose of writing[Ka-ryae] and its transmission and operation from the end of Koryo to Chosun dynasty. And Studying of a traditional marriage ceremony as shown in [Ka-ryae], We intend to find a mental meaning and value in it. The major findings this study are as follows. 1. Though [Ka-ryae] was written by Chu-Ja who lived in the period of South-Song of China, it had greatly influenced the thought, system and life of Korean society from the end of Koryo to Chosun dynasty. 2. Studying the content of [Ka-ryae], we learned the respect, discretion and reghtness as the mental meaning and value of a marriage ceremony.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.1
• /
• pp.136-141
• /
• 2021

The crossing Y-stent method is one of the indispensable techniques to achieve sufficient neck coverage during coil embolization of bifurcation aneurysms with a wide neck and/or branch incorporation. However, the inevitable hourglass-like expansion of the second stent at the crossing point can result in insufficient vessel wall apposition, reduced aneurysm neck coverage, delayed endothelialization, and subsequent higher risks of acute or delayed thrombosis. It also interferes with engagement of the microcatheter into the aneurysm after stent installation. We expected to be able to reduce these disadvantages by installing a noncrossing type Y-stent using the Solitaire AB stent, which is fully retrievable with a tapered proximal end. Here we report the techniques and two successful cases.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.335-340
• /
• 2000

A 3 valve-type pulse tube refrigerator optains its cooling effect from pressure drop by releasing the part of the charged gas through hot end nozzle. The objective of this study is to analyze the performance and to find an optimal expansion pressure of the 3 valve-type pulse tube refrigerator. It is assumed that gas lumps are not mixed and periodically repeat the adiabatic compression and expansion processes. And the nodal model is applied for the analysis of the regenerator. As the result of analysis, the optimum pressure at the end of expansion process was about 80-90% of the maximum pressure.

• Analytical Science and Technology
• /
• v.35 no.1
• /
• pp.8-14
• /
• 2022

Many studies have shown that advanced glycation end-products (AGEs) and glycation adducts are significantly linked to aging and disease. Particularly, the level of glycation in human milk is important because the AGE intake is closely related to AGE levels in infants. In this study, we used human milk samples obtained from four primiparae and four multiparae. We isolated proteins using acetone and trichloroacetic acid (TCA) precipitation. A total of 67 glycated proteins and 122 glycated peptides was quantified; among them, 19 glycated peptides were differentially expressed. We confirmed that the degree of glycation differed according to fertility. The study provides a foundation for using proteomics to evaluate the mother's milk quality and link between maternal health and human milk quality.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1679-1683
• /
• 2005

This paper suggests the new type of a joint torque sensor which is attached at each joint of a manipulator for making compliance. Previous six axis force/torque sensors are high cost and installed end-effector of the manipulator. However, torque on links of previous an end-effector cannot be measured. We design a joint torque sensor that can be fully integrated with an actuator in order to measure applying torque of the manipulator. The sensor system is designed through the structural analysis. The proposed joint torque sensors are installed to the 6 DOF manipulator of a mobile robot for hazardous works and we implemented experiments of measuring applied torque to the manipulator. By the experiment, we proved that the proposed low-cost joint torque sensor gives acceptable performance when we control a manipulator.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.83-92
• /
• 2005

This paper is to evaluate the load carrying capacities of cold-formed steel columns subject to combined axial load and bending moment. A combined strength experiment is carried out using full-scale 24 specimens of lipped channel section with embossment in web. An eccentric axial load is applied in varying member-length and eccentric distance which produces an end-moment of the column. The predictions of the AISI specification and the Eurocode are compared with the experimental results, and it is shown that all of these codes are reasonable on the whole in relation to the experimental results.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.2
• /
• pp.238-246
• /
• 2004

In displaying a virtual wall using a passive haptic device equipped with passive actuators such as electric brakes, unsmooth motion frequently occurs. This undesirable behavior is attributed to time delay due to slowness in the virtual environment update and force approximation due to the inability of a brake to generate torque in arbitrary directions. In this paper a new control scheme called direct control is proposed to achieve smooth display on the wall-following task with a passive haptic device. In direct control, brakes are controlled so that the normal component of a resultant force at the end-effector vanishes, based on the force analysis at the end-effector of the passive haptic device using the passive FME (Force Manipulability Ellipsoid). Various experiments have been conducted to verify the validity of the direct control scheme with a 2-link passive haptic system.

• Journal of Radiation Protection and Research
• /
• v.28 no.4
• /
• pp.361-368
• /
• 2003

The economic and environmental friendliness analysis of the nuclear fuel cycle options that can be expected in Korea were performed. Options considered are direct disposal, reprocessing and DUPIC (Direct Use of Spent PWR Fuel In CANDU Reactors). By considering the result of calculation of the annual uranium requirement and nuclear spent fuel generation by analysis of nuclear fuel material flows in the nuclear fuel cycle options, we decided the time of back-end nuclear fuel cycle processes and the volume. Then we can analyze the economic and environmental friendliness by applying the unit cost and unit value of each process, respectively.