• Steel and Composite Structures
• /
• 제48권5호
• /
• pp.547-564
• /
• 2023

This study investigates the effect of bolt preloading on the rotational stiffness of stainless steel end-plate connections. An experimental programme incorporating 11 full-scale joint specimens are carried out comparing the behaviours of fully pre-tensioned (PT) and snug-tightened (ST) flush/extended end-plate connections, made of austenitic or lean duplex stainless steels. It is observed from the tests that the presence of bolt preloading leads to a significant increase in the rotational stiffness. A parallel finite element analysis (FEA) validated against the test results demonstrates that the geometric imperfection of end-plate has a strong influence on the moment-rotation response of preloaded end-plate connections, which is crucial to explain the observed "two-stage" behaviour of these connections. Based on the data obtained from the tests and FE parametric study, the performance of the Eurocode 3 predictive model is evaluated, which exhibits a significant deviation in predicting the rotational stiffness of stainless steel end-plate connections. A modified bi-linear model, which incorporates three key properties, is therefore proposed to enable a better prediction. Finally, the effect of bolt preloading is demonstrated at the system (structure) level considering the serviceability of semi-continuous stainless steel beams with end-plate connections.

• Journal of Internet Technology
• /
• 제22권5호
• /
• pp.1069-1082
• /
• 2021

The Internet of Things (IoT) is vulnerable to a wide range of security risks, which can be effectively mitigated by applying Cyber Threat Intelligence (CTI) sharing as a proactive mitigation approach. In realizing CTI sharing, it is of paramount importance to guarantee end-to-end protection of the shared information as unauthorized disclosure of CTI is disastrous for organizations using IoT. Furthermore, resource-constrained devices should be supported through lightweight operations. Unfortunately, the aforementioned are not satisfied by the Hypertext Transfer Protocol Secure (HTTPS), which state-of-the-art CTI sharing systems mainly depends on. As a promising alternative to HTTPS, Ephemeral Diffie-Hellman over COSE (EDHOC) can be considered because it meets the above requirements. However, EDHOC in its current version contains several security flaws, most notably due to the unprotected initial message. Consequently, we propose a lightweight end-to-end privacy-preserving security protocol that improves the existing draft EDHOC protocol by utilizing previously shared keys and keying materials while providing ticket-based optimized reauthentication. The proposed protocol is not only formally validated through BAN-logic and AVISPA, but also proved to fulfill essential security properties such as mutual authentication, secure key exchange, perfect forward secrecy, anonymity, confidentiality, and integrity. Also, comparing the protocol's performance to that of the EDHOC protocol reveals a substantial improvement with a single roundtrip to allow frequent CTI sharing.

• Journal of KIISE:Information Networking
• /
• 제32권4호
• /
• pp.495-507
• /
• 2005

Measuring the end-to-end available bandwidth in the Internet is a useful tool for distributedapplication services or QoS (Quality-of-Service) guarantee. To measure the end-to-end available bandwidth, Single-hop Gap model-based packet train measurement techniques are well-known. However, the error of packet train output gap can happen by network topologies. This error of the output gap causes the inaccuracy of the available bandwidth measurement. In this paper, we propose a new end-to-end available bandwidth measurement technique with accurate capacity measurement and fast convergence methods. To solve the erroneous capacity measurement problem of the back-to-back packet train transmission, we propose a new available bandwidth measurement method by decoupling the capacity measurement with the initial gap of the packet train. Also, we propose a new technique to predict the proper initial gap of the packet train for faster convergence. We evaluate our proposed method by the simulation in various topologies comparing with previous methods.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 한국정보시스템학회 1996년도 추계학술발표회 발표논문집
• /
• pp.5-26
• /
• 1996

This study has two research objectives related to end-user computing (EUC). One of the research objectives was to investigate the current status of EUC of Korean firms. Another research objective was to examine the relationship between individual differences of end-users and EUC success. Using survey data from 752 end-users of 23 firms, the surrent status of EUC and the relationship between individual differences of end-users and EUC success were investigated. The current status of EUC was examined from six perspectives: 1). what is the characteristics of EUC strategy of Korean firms, 2). what are the individual characteristics of end-users in Korean Firms, #0. what are the characteristics of tasks performed by end-users using computer, 4). what are the application a areas of EUC, 5). How end-users are satisfied with the support of firms, 6). what are system usage and satisfaction of end-users. It was also foud that individual differences of end-users are related to EUC success. More specifically, it wat shown that the male gender, younger age, higher level of education, higher rank and organizational tenure, higher math ability, thinking type of cognitive style, positive and optimistic attitudes toward computer, more experience with computer, more computer education and knowledge are individual differences variables associated with EUC success. The results of stepwise regression analysis suggested that the individual difference variables accounted for 14%, 25%, 39% and 30% of the variances of four EUC success variables, satisfaction for outcome, satisfaction for ability, frequency of computer use, and the number of tasks, respectively. These empirical findings suggest that EUC managers should consider individual differences of end-users in managing EUC, such as education, training, support, and human resource management, to maximize potential benefits of EUC.

• Current Photovoltaic Research
• /
• 제8권1호
• /
• pp.39-43
• /
• 2020

In this study, we predict the generation of end-of-life photovoltaic modules when Feed in Tariff applied, in Republic of Korea. Based on the installation of photovoltaic modules, we prepared three different senarios in order to estimate the generation of end-of-life photovoltaic modules. The senarios are i) early worn-out, ii) mid worn-out and iii) late-worn out senario. We selected the mid worn-out senario to estimated the amount of end-of-life photovoltaic modules in this study. Establishment of the end-of-life module generation scenario predicted generation of end-of-life photovoltaic module, and forecasted generation amount of end-of-life module to which Feed in Tariff was applied in consideration of installed photovoltaic modules installed by Feed in Tariff support. The generation of Feed in Tariff-applied end-of-life modules increased from 2021 to 2025 compared to without Feed in Tariff, and since then, the Feed in Tariff-applied end-of-life modules were generated as waste modules during the relevant period (2021 ~ 2025).

• Journal of Chest Surgery
• /
• 제37권7호
• /
• pp.617-621
• /
• 2004

End-to-end anastomosis for benign esophageal stricture (BES) is technically easier and relatively lower in morbidity than esophago-enterostomy. We performed segmental resection and end-to-end anastomosis in 2 cases of short segmental BES who were failed repeated endoscopic dilatation. A 13-month-old female with postoperative stricture was treated successfully. However, a 27-year-old female with corrosive stricture required second operative management of esophago-colo-gastrostomy following end-to-end anastomosis. Our experiences suggested that end-to-end anastomosis for BES could be used as a valid procedure for well selected patients. However, further studty is needed to compare with esophago-enterostomy.

• Journal of Digital Contents Society
• /
• 제3권1호
• /
• pp.101-111
• /
• 2002

Lately development of network around Internet expands range of data traffic to multimedia information, and so for the guarantee of multimedia services end-to-end QoS(Quality of Service) must service because comparing with existing Internet service can not support For satisfying those QoS requirements, network have to guarantee not only network on parameter, such as delay, jitter, throughput but also system resources like CPU utilization, memory usage. Therefore it is urgent to develop QoS based middleware to distribute multimedia data and maximize network utilization in the limited resource environment. And it must be necessary of network to provide end-to-end QoS(Quality of Service) for multimedia applications. Multimedia applications want that QoS which satisfy their own service properties be guaranteed Then, We must analyze those necessary QoS requirements md define QoS parameter which specify as two viewpoint, user's and network's perspective. Therefore network provider supplying network for usual user and university, enterprise must want to find about their own network performance and problem. It is essential for network manager to want to use a tool like this. On the basis of technique about QoS test-bed in the AIM network, We studied on the method of QoS measurement and management about end-to-end connection in the Internet. We measured network status about end-to-end connection and analyze the result of performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제40권12호
• /
• pp.125-135
• /
• 2003

In this paper, we developmed and implemented router and bandwidth broker that provides end-to-end QoS in differentiated service IP networks. Our design goal is to provide end-to-end premium service using the EF PHB. The bandwidth broker and router were implemented in the FreeBSD 4.6 platform. For the DiffServ router, we implemented QoS daemon, rollback managment routine, monitoring, and COPS-PR client. Also, Ive implemented bandwith broker which has SLS and resource management function, and signaling protocols for interfacing intra-and inter-domain. On the testbed, we have validated and evaluated the performance of the implemented DiffServ router and bandwidth broker using the inter-domain signaling protocol client in MS Windows platform. The test results show that the end-to-end QoS can be guaranteed for the inter-domain diffServ by the implemented system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제6권2호
• /
• pp.236-247
• /
• 2002

We propose a cell－multiplexing scheme for the real－time communication service in ATM network and a new service discipline guarantee end-to-end delay based on pseudo-isochronous cell switching. The proposed scheme consists of two level frame hierarchy, upper and lower frame, which is used to assign the bandwidth and to guarantee the requested delay bound, respectively. Since the Proposed algorithm employs two level frame hierarchy, it can overcome the coupling problem which is inherent to the framing strategy It can be comparatively reduce the complexity, and still guarantee the diverse delay bounds of end-to-end. Besides, it consists of two components, traffic controller and scheduller, as the imput traffic description model and regulates the input traffic specification. The function of the traffic controller is to shape real -time traffic to have the same input pattern at every switch along the path. The end-to-end delay is bounded by the scheduller which can limit the delay variation without using per-session jitter controllers, and therefore it can decrease the required buffer size. The proposed algorithm can support the QoS's of non-real time traffic as well as those of real time traffic.

• Journal of Communications and Networks
• /
• 제14권4호
• /
• pp.434-442
• /
• 2012

Several gateway selection schemes have been proposed that select gateway nodes based on a single Quality of Service (QoS) path parameter, for instance path availability period, link capacity or end-to-end delay, etc. or on multiple non-QoS parameters, for instance the combination of gateway node speed, residual energy, and number of hops, for Mobile Ad hoc NETworks (MANETs). Each scheme just focuses on the ment of improve only a single network performance, i.e., network throughput, packet delivery ratio, end-to-end delay, or packet drop ratio. However, none of these schemes improves the overall network performance because they focus on a single QoS path parameter or on set of non-QoS parameters. To improve the overall network performance, it is necessary to select a gateway with stable path, a path with themaximum residual load capacity and the minimum latency. In this paper, we propose a gateway selection scheme that considers multiple QoS path parameters such as path availability period, available capacity and latency, to select a potential gateway node. We improve the path availability computation accuracy, we introduce a feedback system to updated path dynamics to the traffic source node and we propose an efficient method to propagate QoS parameters in our scheme. Computer simulations show that our gateway selection scheme improves throughput and packet delivery ratio with less per node energy consumption. It also improves the end-to-end delay compared to single QoS path parameter gateway selection schemes. In addition, we simulate the proposed scheme by considering weighting factors to gateway selection parameters and results show that the weighting factors improve the throughput and end-to-end delay compared to the conventional schemes.