• Journal of Agricultural Extension & Community Development
• /
• v.20 no.2
• /
• pp.485-509
• /
• 2013

People have tendency to remember only the last good memories in result. It was similar that main singer or event has often at end of the program. Psychologist of Kahneman found that we remember about the pleasurable quality of our past experience is almost entirely determined by the strongest experience(Peak) and the last experience(End). This study examined Peak-End Rule available to the three different group of foreigner package tourists visited Ha-Dong Wild tea cultural festival. Results that all group's End experience have influence to satisfaction of festival. Also Peak experience has influenced significant to satisfaction of festival except of third group. First and Second group satisfaction were influenced both of Peak experience and End experience.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.1
• /
• pp.39-46
• /
• 2008

The end plates of fuel cell assemblies are used to fasten the inner stacks, reduce the contact pressure, and provide a seal between Membrane-Electrode Assemblies (MEAs). They therefore require sufficient mechanical strength to withstand the tightening pressure, light weight to obtain high energy densities, and stable chemical/electrochemical properties, as well as provide electrical insulation. The design criteria for end plates can be divided into three parts: the material, connecting method, and shape. In the past, end plates were made from metals such as aluminum, titanium, and stainless steel alloys, but due to corrosion problems, thermal losses, and their excessive weight, alternative materials such as plastics have been considered. Composite materials consisting of combinations of two or more materials have also been proposed for end plates to enhance their mechanical strength. Tie-rods have been traditionally used to connect end plates, but since the number of connecting parts has increased, resulting in assembly difficulties, new types of connectors have been contemplated. Ideas such as adding reinforcement or flat plates, or using bands or boxes to replace tie-rods have been proposed. Typical end plates are rectangular or cylindrical solid plates. To minimize the weight and provide a uniform pressure distribution, new concepts such as ribbed-, bomb-, or bow-shaped plates have been considered. Even though end plates were not an issue in fuel cell system designs in the past, they now provide a great challenge for designers. Changes in the materials, connecting methods, and shapes of an end plate allow us to achieve lighter, stronger end plates, resulting in more efficient fuel cell systems.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.2
• /
• pp.1-8
• /
• 2019

Network externalities are essentially dynamic in that the value consumers feel about a product is affected by the size of the existing customer base that uses that product. However, existing studies on network externalities analyzed the effects of network externalities in a static way, not dynamic. In this study, unlike previous studies, the impact of network externalities on price competition in a vertically differentiated market is dynamically analyzed. To this end, a two-period duopoly game model was used to reflect the dynamic aspects of network externalities. Based on the game model, the Nash equilibria for price, sales volume, and revenue were derived and numerically analyzed. The results can be summarized as follows. First, if high-end product has strong market power, the high-end product vendor takes almost all benefits of the network externality. Second, when high-end product has strong market power, the low-end product will take over most of the initial sales volume increase. Third, when market power of high-end product is not strong, it can be seen that the effects of network externalities on the high and low-end products are generally proportional to the difference in quality. Lastly, if there exists a strong network externality, it is shown that the presence of low-end product can be more profitable for high-end product vendor. In other words, high-end product vendor has incentive to disclose some technologies for the market entrance of low-end product, even if it has exclusive rights to the technologies. In that case, however, it is shown that the difference in quality should be maintained significantly.

• Journal of Hospice and Palliative Care
• /
• v.24 no.4
• /
• pp.235-244
• /
• 2021

Purpose: This study aimed to provide basic data for developing interventions to relieve the end-of-life care stress experienced by pediatric nurses by examining the relationships of end-of-life care stress with compassionate competence and attitudes toward end-of-life care. Methods: Data were collected via a survey that was conducted from September 10 to September 30, 2018 and administered to 113 nurses who had worked for more than 6 months in a pediatric unit at a tertiary hospital in Seoul, South Korea. The data were analyzed for frequency, percentage, mean, and standard deviation, and the independent t-test, one-way analysis of variance, and Pearson correlation analysis were conducted using SPSS version 25.0. Results: End-of-life care stress among pediatric nurses had a weak positive correlation (r=0.216, P<0.05) with compassionate competence and had no significant correlation with attitudes toward end-of-life care. Among the sub-factors of end-of-life care stress, psychological difficulties had a weak positive correlation with sensitivity (r=0.309, P<0.01) and communication (r=0.230, P<0.05), which are aspects of compassionate competence. Lack of knowledge about end-of-life care had a weak positive correlation with communication (r=0.209, P<0.05) as an aspect of compassionate competence. Conclusion: To improve the quality of end-of-life care provided by pediatric nurses, it is necessary to improve their compassionate competence and reduce their end-of-life care stress by developing education and support programs tailored to the characteristics of children and specific communication methods.

• Journal of Hospice and Palliative Care
• /
• v.26 no.4
• /
• pp.160-170
• /
• 2023

Purpose: The aim of this study was to examine the effects of death anxiety and perceived end-of-life care competencies on the fear of terminal care among clinical nurses. Methods: This correlational study was conducted from June to July 2021. The study included 149 clinical nurses employed at a tertiary hospital and seven other hospitals. The measurement tools used in this study were the Thanatophobia Scale (Cronbach's α=0.87), the Death Anxiety Scale (Cronbach's α=0.80), and the Scale of End-of-life Care Competencies (Cronbach's α=0.94). These instruments were chosen to assess the levels of fear of terminal care, death-related anxiety, and competencies in end-of-life care. Results: The mean score for fear of terminal care was 3.32±1.32. Differences in fear of terminal care were observed based on the working unit, position, number of patients requiring terminal care, and experience with end-of-life care education. Fear of terminal care was significantly positively correlated with death anxiety and significantly negatively correlated with end-of-life care competencies. In multiple regression analysis, the factors influencing fear of terminal care were attitudes toward end-of-life care competencies (𝛽=-0.39, P<0.001), death anxiety (𝛽=0.24, P<0.001), knowledge of end-of-life care competencies (𝛽=-0.22, P=0.005), and behaviors related to end-of-life care competencies (𝛽=-0.16, P=0.021). These factors explained 64.6% of the total variance (F=25.54, P<0.001). Conclusion: This study suggests that developing nurses' end-of-life care competencies and reducing death anxiety are crucial for managing the fear of terminal care. Therefore, providing end-of-life care education and psychological support programs is important.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.624-627
• /
• 2002

A study on machining electrode for LEO(Light Emitted Diode) mold with shaped end-mill is presented. The electrode machining by shaped end-mill has been used for maximizing the productivity in manufacture of semiconductor mold. However, it has not been researched systematically for many difficulties such as the making of shaped end-mill, generation of tool path due to distinctive tool geometry, and so on. Tool path is generated on the shaped end-mill geometry and cutting force to provide accurate and efficient machining of electrode. The verification program can drive enhancement of productivity, selecting cutting conditions from experiment function of cutting force. Also, compensation of tooting and machina error can make the electrode accurate by modifying tool path. Therefore, the research on machining with shaped end-mill can contribute to enhancement of accuracy and productivity in building semiconductor mold.

• Journal of Power System Engineering
• /
• v.6 no.3
• /
• pp.31-35
• /
• 2002

Brake tube is considered one of the most important parts in automobile. The shape of brake tube end has a great influence on the function of brake, and the quality and productivity of brake tube have relation to die design. The forming process of brake tube end is performed by hydraulic press forming machine. In this paper, the forming processes of tube end for automobile is analyzed and designed to make the optimal form of brake tube end. Also, finite element analysis has been carried out using $DEFORM^{TM}% 3D to predict the optimal shape of brake tube end and the results obtained showed the optimal length between punch and chuck is $1.0{\sim}1.2mm$. The shape of tube end is in good agreement with the finite element simulations and the experimental results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.4
• /
• pp.121-126
• /
• 2011

An accumulator placed on the refrigerant cycle pipe lines is a part to relax fluctuations of pressure within the pipe lines and stabilize refrigerants flowed into pipe. The accumulator has been mainly manufactured by the process of tube spinning using CNC(Computer Numerical Control) lathe. However, this process has the defects which are low productivity per hour and high cost. For that reason, tube end-forming using roll die is actively being developed, recently. The purpose of this study is to develope the tube end-forming process using roll die in order to manufacture the accumulator for the refrigeration pipe lines. First, the process design of tube end-forming was performed based on specification of product, and then was verified with FE analysis. Also, the effects of friction coefficient and revolution speed of roll die on forming load were investigated. The analytical results were applied in the final process design of tube end-forming. Finally, tube end-forming test was carried out to verify the validity of the FE analysis and the process design.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.721-726
• /
• 1999

Diverse strengthening methods for reinforced concrete are applied to real structures with a variety of materials. On the other hand, only external prestressing is used for strengthening damaged prestressed concrete girders. But the end brackets for external prestressing are hard to design and to manufacture, the magnitude of prestressing is limited when applied to real structures. The current end brackets are not clearly understood in load transmitting mechanisms and they may damage the original girder by drilling during construction. And also the designed welding area of the current bracket is insufficient to support the high load. The problems of current end bracket are solved in this study. And a new and improved end bracket is proposed and tested. The tested end bracket is similar to the end bearing bracket, but many supportting plates are addded to increase its welding length of the weakest point of the bracket. The increased welding length finally increases its load carrying capacity significantly.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.77-82
• /
• 2003

In end milling process, undeformed chip thickness and cutting force vary periodically with phase change of the tool. Recently, a model has been proposed to simulate the shear and friction characteristics of an up-end milling process in terms of the equivalent oblique cutting to this. In the current study, the varying undeformed chip thickness and the cutting forces in a down-end milling process have been replaced with the equivalent ones of oblique cutting. And, the down-end milling characteristics of SM45C has been compared with that of the up-end milling previously presented with different helix angles.