• ALGAE
• /
• v.24 no.1
• /
• pp.31-38
• /
• 2009

The brown algae padina concrescens is widely distributed in the northwestern Pacific Mexico. We described the population of P. concrescens based on population parameters such as cover, density and size structure and reproduc-tion at two levels tide at the intertidal area in the southwestern Baja. California Peninsula. Monthly visits from January to December 2003 were done. Both cover and density were measured in situ by quadrants method. Samples were collected to obtain size structure and percentage of reproductive fronds. Our results show there is sparial vari-ation in the population structure more than temporal. Thus, cover and density peak were at different months ineach tide level studied, the lower tide level shows the high values in cover as well as density. The frond develop-ment was observed in height/width ratio this relation was consistent only in the low tidal zone. Size class distribu-tion has consistently small size plants in both tide levels.Reproduction was seasonal in the tide channel but in both tide levels all the reproductive plants were tetrasporophyte. Our results suggest that this population is pseudopere-nial and it strongly as a consequence of the intense competition in the intertidal zone.

• Membrane and Water Treatment
• /
• v.1 no.4
• /
• pp.231-251
• /
• 2010

The sulfatation of chitosan, by reaction with chlorosulfonic acid under controlled conditions, allowed increasing the pH range of chitosan solubility. The biopolymer was characterized using FTIR and $^{13}C$-NMR spectroscopy, elemental analysis and titration analysis and it was tested for mercury recovery by polymer enhanced ultrafiltration (PEUF). In slightly alkaline conditions (i.e., pH 8) mercury recovery was possible and at saturation of the polymer the molar ratio $-NH_2$/Hg(II) tended to 2.6. Polymer recycling was possible changing the pH to 2 and the polymer was reused for 3 cycles maintaining high metal recovery. The presence of chloride ions influences metal speciation and affinity for the polymer and "playing" with metal speciation allowed using the PEUF process for mercury separation from cadmium; at pH 11 the formation of hydroxo-complexes of Hg(II) limits it retention. Cake formation reveals the predominant controlling step for permeation flux.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.5
• /
• pp.397-406
• /
• 2023

Objectives: The purpose of this study was to determine factors associated with non-vaccination against coronavirus disease 2019 (COVID-19) among the Venezuelan immigrant population residing in Peru. Methods: A cross-sectional study was conducted using data obtained from the Second Survey of the Venezuelan Population Residing in Peru in 2022. The dependent variable was vaccination status against COVID-19. The independent variables included socio-demographic, economic, and migratory characteristics of the included population. Crude and adjusted generalized linear Poisson-family models were used to calculate prevalence ratios with 95% confidence intervals (CIs). Results: A total of 7739 Venezuelan migrants aged 18 years or older were included. The proportion of non-vaccination against COVID-19 was 5.7%. Regarding associated factors, unemployment (adjusted prevalence ratio [aPR], 1.31; 95% CI, 1.04 to 1.65) was linked to an increased likelihood of not being vaccinated against COVID-19. In contrast, women (aPR, 0.76; 95% CI, 0.61 to 0.95), possessing a migration permit (aPR, 0.41; 95% CI, 0.31 to 0.54), and having health insurance (aPR, 0.47; 95% CI, 0.27 to 0.81) were associated with a decreased likelihood of being unvaccinated. Conclusions: The primary governmental and non-governmental institutions responsible for supporting and protecting the Venezuelan migrant and refugee population should improve vaccination access by issuing migration permits and providing health insurance.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.203-209
• /
• 2017

The propenyl ether-type monomers which are applicable for cationic photo-polymerization were synthesized by the condensation reaction of mono and di-functional alcohol with allyl bromide. To examine photo-curable reactivity, these monomers were combined with cationic photoinitiator to prepare coating composition. As a result, the initial rate of polymerization of POMB in mono propenyl ether type was 10.2, which was relatively lower than BPOB in di-propenyl ethers type. However, POMB containing 1.5mol% photoinitiator almost quantitatively reacted within 90 seconds. In addition, Sulfonium salt type photo-initiators containing long-alkyl group showed good solubility with monomers and apperaed to have comparatively higher rate of polymerization and conversion ratio when applying DPSA and DPST which have high acidity on all monomers.

• Journal of the Korean Society for Precision Engineering
• /
• v.5 no.3
• /
• pp.71-80
• /
• 1988

This paper dealt with experimentally the effect of $N_2$ and $H_2$ gas mixtures ratio in the fatigue characteristics of SM45C on Ion-nitrided. The specimen were treated water cooling after Ion-nitriding at $500^{\circ}C$ and 5 torr. in 80% $N_2$and 50% $N_2$gas mixtures ratio in the atmosphere for 3 hrs. The hardness distribution and the depth of nitriding layer shows more increase in 80% $N_2$gas mixture ratio than 50% $N_2$. Ion-nitrided specim- en for 80% $N_2$gas mixture ratio show more increase infatigue strenght in the $>1.5{\times}10^5$ cycles region than 50% $N_2$. In the $<1.5{\times}10^5$cycles region, fatigue failure is due to cracking of the brittle nitrided case, and the propergation of the surface cracks into the core. But in the $>1.5{\times}10^5$cycles region, it is found that cracks propagate from the non-metallic inclusions in the subsurface.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.129-131
• /
• 2003

The aim of this study is to evaluate the hazard of landslides at Penang, Malaysia, using a Geographic Information System (GIS) and remote sensing. Landslide locations were identified in the study area from interpretation of aerial photographs and field surveys. The topographic and geologic data and satellite image were collected, processed and constructed into a spatial database using GIS and image processing. The used factors that influence landslide occurrence are topographic slope, topographic aspect topographic curv ature and distance from drainage from topographic database, geology and distance from lineament from the geologic database, land use from TM satellite image and vegetation index value from SPOT satellite image. Landslide hazardous area were analysed and mapped using the landslide-occurrence factors by probability - likelihood ratio - method. The results of the analysis were verified using the landslide location data. The validation results showed satisfactory agreement between the hazard map and the existing data on landslide location.

• Computers and Concrete
• /
• v.30 no.1
• /
• pp.33-42
• /
• 2022

Experimentally predicting the compressive strength (CS) of concrete (for a mix design) is a time-consuming and laborious process. The present study aims to propose surrogate models based on Support Vector Machine (SVM) and Gaussian Process Regression (GPR) machine learning techniques, which can predict the CS of concrete containing nano-silica. Content of cement, aggregates, nano-silica and its fineness, water-binder ratio, and the days at which strength has to be predicted are the input variables. The efficiency of the models is compared in terms of Correlation Coefficient (CC), Root Mean Square Error (RMSE), Variance Account For (VAF), Nash-Sutcliffe Efficiency (NSE), and RMSE to observation's standard deviation ratio (RSR). It has been observed that the SVM outperforms GPR in predicting the CS of the concrete containing nano-silica.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.209-216
• /
• 2019

Objective: We compare the effects of three different approved sources of supplemental zilpaterol on growth-performance responses and carcass characteristics of finishing lambs. Methods: Twenty four Pelibuey${\times}$Katahdin lambs ($46.75{\pm}2.43kg$) were used in a 33-day feeding trial. Lambs were fed a dry rolled corn-based finishing diet. Treatments consisted of the non-supplemental basal diet (Control) versus the basal diet supplemented with 125 mg zilpaterol/kg of diet (as fed basis) from three commercial sources marketed in Mexico: Zilmax (ZIL), Grofactor, and Zipamix. Results: Compared to controls, zilpaterol (ZH) supplementation did not affect dry matter intake (DMI), but increased carcass adjusted daily weight gain (ADG, 36.7%), gain efficiency (34.2%), and dietary net energy (26.0%), and decreased (23.4%) the ratio of observed:expected DMI. Compared to controls, supplemental ZH increased hot carcass weight (6.4%), dressing percentage (3.2%), m. longissimus thoracis (LM) area (15.6%), and shoulder muscle:fat ratio (28.7%), but decreased kidney-pelvic-heart fat, and fat thickness. Supplemental ZH increased 10.9% and 14.3% whole cut weight of loin and leg, respectively, and the proportion (as percentage of cold carcass weight) of leg (4.3%). These increases were reflected in greater forequarter and hindquarter weights. Lambs fed ZH increased (4.6%) empty body weight (EBW) and reduced (14.7%) liver/spleen weight (as g/kg EBW). Likewise, ZH supplementation tended (p = 0.08) to lower (8.9%) visceral fat. Growth performance, energetic efficiency, hot carcass weight, dressing percentage, LM area and whole cuts were not different across supplemental ZH sources. However, compared with non-supplemented controls, only ZIL appreciably decreased carcass fat distribution, including fat thickness, percentage kidney pelvic and heart fat, shoulder fat, and visceral fat. Conclusion: Supplemental ZH increases ADG, gain efficiency, carcass dressing percentage, and LM area. The magnitude of these responses was similar among ZH sources. Nevertheless, compared with non-supplemented controls, only ZIL appreciably decreases carcass fat. The basis for this is uncertain, but indicative that some practical differences in zilpaterol bio-equivalency may exist across commercial sources tested.

• The Journal of the Petrological Society of Korea
• /
• v.9 no.3
• /
• pp.169-186
• /
• 2000

The Miocene volcanic rocks in the Dangsari area, eastern part of Ulsan city, are mainly composed of andesite lava flows and pyroclastic rocks. The andesite lavas are identified as two-pyroxone andesite, comprising phenocrysts of augite ($Wo_{43.2}$ $En_{41.0}$ $Fs_{15.8}$ ) and hyperthene ($Wo_{2.7}$ $65.8_{En}$ $_{Fs}$ 31.5). The andesitic pyroclastic rocks are largely composed of pyroclastic breccias with alternating tuff-breccia and lapilli tuff, which showing planar layering, and minor amount of andesitic tuff with thin deposits of interlayered tuffaceous shale. According to the petrochemical data, andesitic rocks belong to medium-K calc-alkaline andesite. The position of bulk composition on the AFM diagram and the presence of normative quartz and hypersthene indicate that the volcanic rocks are calc-alkaline. The trace element composition and REE patterns of andesite, which are characterized by a high LILE/HFSE ratio and enrichment in LREE, suggest that they are typical of continental margin arc calc-alkalic volcanic rocks produced in the subduction environment. On the discrimination diagram, the Dangsari volcanic rocks fall into the fields of subduction related continental margin arc volcanic province. The primary magic melts may be derived from about 15% partial melting of mantle wedge in the upper mantle under destructive plate margin. And the melt evolved to calc-alkaline andesite magma by fractional crystallization and the magma was a little contaminated with crustal materials.

• Journal of Biomedical Engineering Research
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2003

The job of long distance driving is likely to be fatiguing and requires long period alertness and attention, which make considerable demands of the driver. Driving fatigue contributes to driver related with accidents and fatalities. In this study, we investigated the relationship between the number of hours of driving and driving fatigue using heart rate variability(HRV) signal. With a more traditional measure of overall variability (standard deviation, mean, spectral values of heart rate). Nonlinear characteristics of HRV signal were analyzed using Approximate Entropy (ApEn) and Poincare plot. Five subjects drive the four passenger vehicle twice. All experiment number was 40. The test route was about 300Km continuous long highway circuit and driving time was about 3 hours. During the driving, measures of electrocardiogram(ECG) were performed at intervals of 30min. HRV signal, derived from the ECG, was analyzed using time, frequency domain parameters and nonlinear characteristic. The significance of differences on the response to driving fatigue was determined by Student's t-test. Differences were considered significant when a p value < 0.05 was observed. In the results, mean heart rate(HRmean) decreased consistently with driving time, standard deviation of RR intervals(SDRR), standard deviation of the successive difference of the RR intervals(SDSD) increased until 90min. Hereafter, they were almost unchanging until the end of the test. Normalized low frequency component $(LF_{norm})$, ratio of low to high frequency component (LF/HF) increased. We used the Approximate Entropy(ApEn), Poincare plot method to describe the nonlinear characteristics of HRV signal. Nonlinear characteristics of HRV signals decreased with driving time. Statistical significant is appeared after 60 min in all parameters.