• Journal of the Korea Society for Simulation
• /
• v.10 no.4
• /
• pp.21-30
• /
• 2001

In this paper, EMI measurement, the STGU simulation being conducted, filter design, its characteristics, and its implementation to the PCB, and finally test results are discussed. When the low pass filter was implemented within the STGU, the power of EMI decreased more than 20dBm. Finally, when TE and MTIE, two important quality measure in synchronous reference clock, was assessed, ITU-T G813 requirement was satisfied. EMI(Electromagnetic Interface) is a measure of electomagnetic radiation from equipment in the range of 10KHz to 3GHz, and can cause unexpected reactions of electronics/electrical equipment. In this study, for safe and stable communication operation, a STGU (System Timing Generation Unit), which is a 2.5G SDH System and a major EMI source, was employed to simulate electromagnetic interface. Using Open-Site test, the power of fundamental frequency of EMI of interest and its harmonics were measured. Also, a low pass filter at cut-off frequency of 2GHz was specifically designed for this study to minimize the effect of EMI between electronic components.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.303-306
• /
• 2002

The EMI filter used in switching apparatus is designed on the basis of personal designer experience. A try and error approach leads to a considerables waste of time without assurance to come out to a good solution. The difficulty in the right choice of the component values resides on the dominant role played by their parasitic components at high frequencies and is aggravated by the poor knowledge of the internal impedance of the noise generators. In this paper, we proposed the design technique for the EMI filter effectively using the LISN and the EMI analyzer in the industrial field.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.3
• /
• pp.260-266
• /
• 2004

Because the EMI filter is mainly designed by trial and error method, it takes many times to reduce the conducted EMI noise in a power converter. Thus, a newly analytical design procedure is proposed to overcome the problem in this paper. High frequency models of each component are built, md, using the modeling circuits, the filter design is carried out applicable to each mode. Based on the accumulated database for practical components, and the measurement data of EUT with a standard filter, the filler design algorithm is presented. Finally, the validity of the Proposed models and design method is verified through the measurement results.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1576_1576
• /
• 2009

We present the design of an EMI filter to mitigate the electrical noise from the power supply over a broadband of a few tens of KHz to 18GHz. Admitting that our approach is not apart from the standard technology of EMI filter, it is worth checking out how we can implement the filter that meets the challenging spec. on band of operation. The function of the EMI filter is well-depicted by its performance on the CE(Conducted Emission) and RE(Radiated Emission) suppression through tests which convince us of its application to power supplies of land, water and flying vehicles.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.91-94
• /
• 2002

This paper presents a novel active common-mode EMI filter for the PWM inverter application. The proposed filter is based on the current sensing and compensation circuit and it utilizes a fast transistor amplifier for the current compensation. The amplifier utilizes an isolated low-voltage dc power supply for its biasing and it is possible to construct the active filter independent of the source voltage of the equipment. Thus the proposed active filter can be used in any application regardless of its working voltage. The effectiveness of the proposed circuit is verified by experimental results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.1 s.92
• /
• pp.56-65
• /
• 2005

We proposed the Power-line EMI filter for vehicle-shelter which have attenuation performance of 100 dB from 10kHz to 1 GHz. The inductor and capacitor for EMI filter design was charactenzed using circuit simulator and then, we experimentally verified 100 dB attenuation for the conducted emission noise through power line. This results will be used for the application systems of protection weapons against EMI attacks as well as vehicle-shelter.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.151-154
• /
• 2020

Radiation noise due to EMI noise generated by the driving circuits of LED lighting devices in a medical imaging room was reduced by decreasing the noise source in the driving circuits and changing the number of corrections in EMI filters. Noise attenuation and filter changes enabled driving circuits that reduced the electromagnetic waves. Such circuits were efficiently designed by using capacitors and inverters in a given space. Therefore, the malfunction of radiation devices can be minimized by using EMI-reduction filter circuits, and reliable operation of medical devices can be expected by blocking electromagnetic waves.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.319-332
• /
• 2014

Insertion loss is used as the character to express the efficiency of EMI filter. In this paper, we studied the better method that can measure the insertion loss of EMI filter exactly than the original method. For the achievement of this, the method measuring both common mode(CM) and differential mode(DM) insertion loss with arbitrary input/output impedance is accomplished using a 4-ports S-parameters system for consideration of unbalanced factor. Using this method, when input/output used in specific system is known, CM/DM insertion loss of EMI filter inserted in the system can be calculated. Finally, we applied 4-ports modeling method to 'X/Y capacitor part' and suggested the algorithm for selecting suitable the value of Y-capacitor using mixed mode S-parameters and mixed mode chain S-parameters.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.871-878
• /
• 2018

In this paper, the conducted EMI reduction performances of active feed-forward current-sensing current-actuation (CSCA) and voltage-sensing current-actuation (VSCA) filters for a three-phase induction motor drive system are evaluated by experiments. For comparison purposes, the conducted EMI (CM emission, DM emission and total emission) of a three-phase induction motor drive with a conventional CM choke, a conventional CM choke in series with an active VSCA filter, and an active CSCA filter (where the CM choke was modified and used as a sensing current transformer) were compared to the case of a system without any filter inserted. Experimental results show that the active CSCA and VSCA filters can improve the CM reduction performance of the conventional CM choke by about 5 dB especially at low-frequencies. However, for DM comparisons, it shows that there is no different between cases with and without filters inserted.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.248-251
• /
• 2017

In this paper, The proposed board is developed by EMI compliant Dash Camera with $360^{\circ}$ omni angle. The proposed board is designed by designing DM and CM input noise reduction circuit and applying active EMI filter coupling circuit. The DM and CM input noise reduction circuit design uses a differential op amp circuit to obtain the DM noise coupled to the input signal via the parasitic capacitance(CP). In order to simplify the circuit by applying the active EMI filter coupling circuit, a noise separator is installed to compensate the noise of the EMI source to compensate the CM and DM active filter simultaneously. In order to evaluate the performance of the board for the proposed EMI response, an authorized accreditation body has confirmed that the electromagnetic certification standard for each frequency band is satisfied.