• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.273-279
• /
• 2016

In this paper, a high-performance control of the induction motor for electric car was implemented to escape dependence of the rare earth magnet. Proposed high-efficiency control algorithm is a Direct Rotor Field-Oriented Control method that is insensitive to the fluctuation of motor parameters. In the DRFOC method, we need to compensate fluctuation of stator transient inductance and magnetizing inductance caused by the magnetic saturation of induction motor in high-speed area. This paper proposes Back-EMF Observer based on stator current estimator of Luenberger style. Motor control system applied the Voltage Feedback Flux Weakening Control method for high-speed operation. The proposed algorithm was verified through tests by the power train of Extended Range Electric Vehicle consists of induction motor and differential gear.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.344-350
• /
• 2003

In this paper, an estimation technique of initial rotor position at standstill in Switched Reluctance Motor(SRM) is proposed. In case search coils are used as a position sensor, it has many advantages like low cost, decrease in the volume, high robust characteristics and wide applications. However, the initial rotor position detection is very difficult because the search coil's EMF is not exist at a standstill. In this paper, a near estimation method of initial rotor position is suggested using squared Euclidean distance. The simulation and experiment for the proposed method are achieved. The validity of the proposed method is verified by experimental results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.35-41
• /
• 2014

This paper presents a design method of programmable low pass filter(PLPF) which reduce an estimation error of a zero crossing point(ZCP) for a high speed brushless DC(BLDC) motor drive. BLDC motor sensorless drive is possible by estimation of ZCP. The ZCP estimated by detecting a change of back-EMF polarity has the estimation error because noises exist on the measured back-EMF. Therefore a calculated commutation timing using the ZCP is inaccurate. And the inexact commutation timing leads to ripples of 3-phase current and degradation of drive performance. This paper proposes the design method of the PLPF to overcome these problems. First, a speed calculated a inaccurate period of the ZCP is analyzed in the frequency domain. Then, the PLPF that has varying cut-off frequency according to change of the speed is designed on the frequency analysis result. The proposed method is verified by the experiment.

• Korean Journal of Materials Research
• /
• v.6 no.2
• /
• pp.228-234
• /
• 1996

BzCuO2 의 생성 자유에너지를 이중 이온교환된 Ba2+-$\beta$/$\beta$"-AI2O3를 전해질로 사용하여 다음과 같은 생성셀로부터 측정하였다. Au(po2=10-3)/Au+BaCuO2+CuO// Ba2+-$\beta$/$\beta$"-Au이 갈바닉셀에서 BzCuO2 의 임의의 생성식과 생성자유에너지는 다음과 같다. BaO+CuO=BaCuO2 $\Delta$fGo/kJ.mol-1=-77.3-3.3x10-3T/K.3x10-3T/K.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.3
• /
• pp.289-295
• /
• 2013

It is important to know exact values of Interior Permanent Magnet Synchronous Motors(IPMSM)' parameters such as stator resistance and inductance in order to have their high performance. This paper proposes a novel motor parameter(stator resistance, d&q axis inductance) estimation algorithm for IPMSM. The proposed estimation method utilizes back-EMF equations and model reference adaptive system(MRAS). The algorithm using back-EMF estimates d and q axis inductances in the constant torque region, and the stator resistance is estimated by using MRAS with the estimated inductance regardless of speed regions. The validity of the proposed algorithm is verified by simulations and experiments.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.109-117
• /
• 2004

This paper presents a current control strategy to reduce torque ripple of Brushless DC Motor in commutation period with PWM pattern. The torque ripple is mainly caused by the inequality in the rate of change between rising current and decaying one during commutation. And also it is influenced by the shape of real back EMF. Therefore, in the proposed control strategy, considering real back EMF a compensation voltage is generated to equalize the rate of change in these commutating currents. And then, by providing the compensation voltage in commutation period with PWM pattern, the torque ripple can be reduced. The simulation and experimental results verify that the proposed method can reduce the torque and the current ripples significantly.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 1999.02a
• /
• pp.65-68
• /
• 1999

The major deisng parameters that are considered in this paper are: 1) EMF according to width of field coil. 2) EMF according to magnetic shield length. Because of superconducting generator (SG) is actually and air cored machine with its rotor iron and stator iron teeth having been removed. In this case, the desing of the SG must be based on the 3D analysis of the magnetic field. This study presents an effective armature winding type with 3D FEM(Finite Element Method), and compares analyzed and measured results.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.135-137
• /
• 2001

In slotless synchronous motor for precise position and speed control, eccentricity of rotor mass cause torque ripple, speed ripple and harmonics of back emf. This paper deals with magnetic field and characteristic analysis for ring type slotless synchronous motor by using analytical method. And then, speed and back emf harmonics are analysed.

• Journal of the Korean Ceramic Society
• /
• v.32 no.9
• /
• pp.1040-1046
• /
• 1995

The formation free energy of Y2Cu2O5 was measured by the partial ion exchanged (Cu2+, Na+)-$\beta$/$\beta$"-Al2O3 as solid state electrolyte. The formation cell was built as follows: Pt(O2)/Y2Cu2O5＋Y2O3//(Cu2+, Na+)-$\beta$/$\beta$"-Al2O3//CuO/(O2)Pt The virtual formation formation formula, and the calculated formation free energy of Y2Cu2O5 as a function of temperature are as follows: 2CuO＋Y2O3=Y2Cu2O5 ΔfG0/kJ.mol-1=13.19-16.25*10-3T/K.5*10-3T/K.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.909-911
• /
• 2000

This paper introduce of program package for the numerical analysis of Electromagnetic field analysis using Finite Element Method, called Electro Magnetic Field(EMF). This software tool is developed by Changwon Nat'l Univ. cooperative with Hanyang Univ. and produced on a commercial scale. EMF has a simple, easy to use graphical interface which steps user through th problem setup, high accurate solution, and fast computation.