• 전력전자학회논문지
• /
• 제17권3호
• /
• pp.246-251
• /
• 2012

This paper proposes a new position compensation method for misaligned Hall-effect sensors of BLDCM(Brushless DC Motor). If the Hall-effect sensors are installed at wrong position, the exact rotor position cannot be obtained. Therefore, when the BLDCM is controlled with this wrong position, the torque ripple can be increased and the average torque also decreases. The back-EMF of BLDCM can be obtained by using the voltage equation and by multiplying the back-EMF constant and rotor speed. At a constant speed, the estimated back-EMF by using the multiplication of the back-EMF constant and rotor speed is constant, but the estimated back-EMF from the voltage equation decreases at the commutation point because the line-to-line back-EMF of two conducting phases is start to decrease at this point. Therefore, by using the difference between these two estimated back-EMFs, the commutation point of the phase current can be determined and position compensation can be carried out. The proposed position correction method doesn't require additional hardware circuit and can be easily implemented. The validity of the proposed position compensation method is verified through several experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.314-315
• /
• 2010

This paper results from the application of IPM for hybrid vehicles using Matsui method and Extended EMF mothed. These 2 methods are typical methods based on EMF, which is usually used in position sensorless control. When d-axle current was 0, both Matsui method and Extended EMF method showed desirable results. On the other hand, when d-axle current was not 0, only Extended EMF appeared satisfactory. This means that Matsui method is more vulnerable to parameter variation. Thus, Extended EMF method would be better than Matsui method to be used in field weaking or MTPA control.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.114-115
• /
• 2013

This paper proposes an estimation method of back emf for the sensorless controlled high speed PMSM drive in turbo compressors with air bearings. The back emf of PMSM motor varies due to the temperature variation, which deteriorates the control performance of sensorless controlled PMSM drives. The proposed method is based on the current model of the PMSM motor. The simulation results show that the proposed method estimates the back emf of sensorless controlled PMSM drives with reasonable accuracy for parameter adaptation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.934-935
• /
• 2015

This paper presents the sensorless control method that employs the adaptive back-EMF(Electromotive Force) and current model observer of interior permanent magnet synchronous motor(IPMSM). The estimated back EMF considering a saliency is obtained by using the adaptive control method. The estimated EMF is inputted to the current model observer which is connected in series with adaptive back EMF estimator and is used to estimate the position and speed of the rotor. In order to improve the shortcomings of conventional method using the current error components multiplied in the compensation constant, the modified instantaneous reactive power compensator is applied. The validity of the control system presented is verified by the simulation.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.183-192
• /
• 1998

In this paper, we measure the back-EMF and the thrust of a linear brushless DC motor along the relative position between coils and magnets in various speed environments in order to obtain the back-EMF and the thrust as a function of a motor position. The measured back-EMF function and thrust function of the position differ from the analytical ones within 5%. The measured back-EMF and thrust function can, then, be employed in controlling the thrust ripple of the linear motor. Furthermore, to minimize the torque ripple of the linear motor, we suggest the design method to shape the back-EMF and thrust function of the linear motor.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.730-735
• /
• 2012

This paper presents a method to design the waveform of a back electromotive force (back EMF) of an axial flux permanent magnet (AFPM) motor using printed circuit board (PCB) windings. When the magnetization distribution of permanent magnet (PM) is given, the magnetic field in the air gap region is calculated by the quasi three dimensional (3D) space harmonic analysis (SHA) method. Once the flux density distribution in the winding region is determined, the required shape of the back EMF can be obtained by adjusting the winding distribution. This can be done by modifying the distance between patterns of PCB to control the harmonics in the winding distribution. The proposed method is verified by finite element analysis (FEA) results and it shows the usefulness of the method in eliminating a specific harmonic component in the back EMF waveform of a motor.

• 소성∙가공
• /
• 제19권1호
• /
• pp.38-43
• /
• 2010

Electromagnetic forming (EMF) method is one of high-velocity forming processes, which uses electromagnetic Lorentz force. Advantages of this forming technique are summarized as improvement of formability, reduction in wrinkling, non-contact forming and applications of various forming process. In this study, the EMF apparatus is developed. It is designed to be stored in 10 capacitors connected in parallel, each with a capacitance of $50{\mu}F$ and maximum working voltage of 5kV. The system has capacitance of $500{\mu}F$ and maximum stored energy of 6.25kJ. And EMF experiments are carried out to verify the feasibility of the EMF apparatus, which has enough forming force from the results of EMF experiment. In addition, peak current carrying a forming coil is predicted from theoretical background, and verified the predicted value compared with experimental value using the current measurement equipment. Consequently, EMF apparatus developed in this study can be applied to various EMF researches for commercialization.

• 전력전자학회논문지
• /
• 제11권2호
• /
• pp.113-119
• /
• 2006

본 논문은 CTDP 기법을 이용한 다양한 역기전력을 갖는 BLDCM(Brushless DC Motor)의 토크특성에 대하여 연구하였다. 상전환 및 상전환 시점에 의한 토크맥동을 개선하기 위한 CDTP 기법을 제안하였다. 이를 위하여 Hague의 해석방법에 따른 실제 역기전력을 갖는 BLDCM의 제어에 적용하였으며 이때 실제 역기전력은 착자의 가장자리 지수와 평탄구간에 의해 발생된다. 이의 검증을 위하여 시뮬레이션 및 실험을 통하여 제안한 방식을 이용한 토크맥동 저감방법의 타당성을 살펴보았다.

• 한국전자파학회논문지
• /
• 제29권12호
• /
• pp.942-952
• /
• 2018

국내에서 개발되고 있는 도시철도용 무선 전달 공급 시스템은 60 kHz 자기장을 이용하여 객차에 전력을 공급한다. 무선 전력 전송 시 발생되는 전자기장에 인체가 노출될 때, 전자기장 세기는 인체 안전성 기준을 만족해야 한다. 하지만 도시철도용 무선 급집전 시스템에서 발생하는 전자기장에 대한 측정 방법과 인체 안전성 평가 방법이 아직 확립되지 않았다. 본 논문에서는 도시철도용 무선 급집전 시스템에서 발생되는 전자기장 측정 방법 및 인체 안전성 평가 방법을 제안하였다. 제안된 측정 방법에 따라 무선 급집전 시스템 시험선로에서 발생되는 전자기장을 측정하고, 전자기장 인체 보호기준치와 비교하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.271-273
• /
• 1995

This paper proposes the efficiency improvement method of vvcf-induction motor drives, which operates always at rated speed, regardless of load conditions, with counter emf estimation. The counter emf is estimated by detecting the fundamental component of motor input current, which is employed in speed control algorithm through the comparison with the actual counter emf during the nonconduction interval. The input power reduction by speed control is confirmed through simulations and experimental results.