• 한국정보통신학회논문지
• /
• 제15권6호
• /
• pp.1397-1403
• /
• 2011

본 논문에서는 W-Band(75 GHz~110 GHz) 주파수 대역에서 전파특성 분석을 위한 샘플홀더 제작을 위하여 수행되었다. 먼저 도파관 내에서 전파의 전파이론을 정립하고 재료정수 측정기법을 도출하였다. 그리고 밀리미터파 W-band에 알맞은 도파관형 샘플홀더를 설계 및 제작하고 RAM 샘플을 이용하여 재료정수 및 전파흡수능을 측정하여 분석하였다. 분석결과 샘플시료 특성을 정확하게 측정할 수 있음을 확인하였으며, 향후 이 측정 샘플홀더는 W-band 대역 전파특성 분석을 위해 매우 유용하게 쓰일 수 있을 것이다.

• 한국항해항만학회지
• /
• 제34권2호
• /
• pp.111-115
• /
• 2010

In this paper, the electromagnetic (EM) wave absorbers using TiO2 as a dielectric material with chlorinated polyethylene (CPE) were investigated in W-band radio frequencies. We compared the relative permittivity with reflectionless curve and the absorption properties of samples containing 40 wt.%, 50 wt.%, 60 wt.%, 70 wt.%, and 80 wt.% TiO2. It is possible to realize a complex relative permittivity satisfying the reflectionless condition by choosing composition ratio of TiO2. The optimized composition ratio of TiO2 for the maximum absorption property is about 70 wt.%. As a result, we have confirmed the realization of an EM wave absorber with a high absorption property in W-band radio frequencies.

• 한국항해항만학회지
• /
• 제35권9호
• /
• pp.717-720
• /
• 2011

In this paper, we designed and fabricated the Electromagnetic(EM) wave absorber for an Electronic Toll Collection(ETC or Hi-pass) system by using Amorphous metal powder and CPE. The material properties and the absorption properties of the samples containing 50 wt.%, 60 wt.%, 70 wt.%, and 80 wt.% of Amorphous. Moreover, the EM wave absorption abilities were simulated for the different thicknesses of the EM absorbers by adopting the measured permittivity and permeability, and then the EM wave absorber was fabricated based on the simulated design values. As a result, the EM wave absorber with the composition of Amorphous metal powder : CPE = 50 : 50 wt.% with the thickness of 2.6 mm has excellent absorption ability more than 40 dB at 5.8 GHz.

• 한국환경기술학회지
• /
• 제19권6호
• /
• pp.493-502
• /
• 2018

수계의 조류발생 원인물질인 질소와 인을 제거할 목적으로 수처리용 EM 담체를 개발한 후, 물리적 특성에 대하여 검토한 결과는 다음과 같다. EM 담체를 제조하기 위한 점토 : 제올라이트 : 질석 : 활성탄의 배합비율은 10 : 2.5 : 0.1 : 2, 소성온도는 $700^{\circ}C$가 적합하였다. EM 담체의 공극률과 밀도는 39.98 %와 $1.13kg/m^3$, 질소와 인의 흡착효율은 69.3 %와 38.9 %, 증류수 담체의 공극률과 밀도는 37.80 %와 $1.11kg/m^3$, 질소와 인의 흡착효율은 62.5 %와 37.8 %로 나타났다. EM 담체가 증류수 담체에 비하여 질소의 흡착효율은 6.8 %, 인의 흡착효율은 1.1 %가 크게 나타났다. 담체의 질소와 인에 대한 흡착특성은 Freudlich 흡착등온식으로 표현이 가능하였다. 소성시간의 변화는 EM 담체를 성형할 때 질소의 인의 흡착효율에는 큰 영향을 미치지 못하였으나 담체의 강도에는 영향을 미칠 것으로 판단된다. 질소의 제거효율은 소성시간 4시간, 인의 제거효율은 소성시간 3시간에서 가장 우수하였다.

• International Journal of Concrete Structures and Materials
• /
• 제3권1호
• /
• pp.25-32
• /
• 2009

A non-destructive testing (NDT) method for evaluating physical properties of concrete including the compressive strength is highly desirable. This paper presents such an NDT method based on measurement of electromagnetic (EM) properties of the material. Experiments are carried out on cement mortar with different water/cement (W/C) ratios. Their EM properties including the conductivity and the dielectric constant are measured at different exposure conditions and curing periods over a wide frequency range of the EM wave. The compressive strength of these specimens is also tested. It is found that both the conductivity and the dielectric constant increase as the W/C ratio decreases and the curing period increases, which lead strength development in the specimens. A linear correlation is observed between the averaged EM properties over the 5 to 20 GHz frequency range and the measured compressive strength, demonstrating the effectiveness of the EM property-based NDT method in evaluating strength of OPC mortar.

• Fibers and Polymers
• /
• 제6권4호
• /
• pp.322-331
• /
• 2005

Graduated compression stockings (GCS) have been widely used for the prophylaxis and treatment of venous diseases. Their gradient pressure function largely related to their fabric structure and material properties. By combing fabric physical testing and wear trials, this study investigated the GCSs fabric structure and material properties at different locations along the stocking hoses, and quantitatively analyzed the effects of fabrics on skin pressure longitudinal and transverse distributions. We concluded that, Structural characteristics and material properties of stocking fabrics were not uniform along the hoses, but a gradual variation from ankle to thigh regions, which significantly influenced the corresponding skin pressure gradient distributions; Tensile (WT, EM) and shearing properties (G) generated most significant differences among ankle, knee and thigh regions along the stocking hose, which significantly influenced the skin pressure lognitudinal gradient distribution. More material indices generating significant gradual changes occurred in the fabric wale direction along stocking hose, meaning that materials properties in wale direction would exert more important impact on the skin pressure gradient performances. And, the greater tensibility and smoother surface of fabric in wale direction would contribute to put stocking on and off, and facilitate wearers' leg extension-flexion movements. The indices of WT and EM of stocking fabrics in series A have strong linear correlations with skin pressure lognitudinal distribution, which largely related to their better performances in gradual changes of material properties. Skin pressure applied by fabric with same material properties produced pronounced differences among four different directions around certain cross-sections of human leg, especially at the ankle region; and, the skin pressure magnitudes at ankle region were more easily influenced by the materials properties, which were considered to be largely related to the anatomic structure of human leg.

• 한국항해항만학회지
• /
• 제34권1호
• /
• pp.15-19
• /
• 2010

최근 빠르고 편리하게 데이터 송수신이 가능한 무선LAN은 가정, 사무실 등 다양한 장소에서 사용이 증가하고 있다. 그러나 실내에서 무선LAN을 사용할 경우 천장, 벽, 바닥, 책상 등에서의 반사파에 의한 다중반사가 발생하여 데이터 전송의 오류 및 성능 저하의 주된 원인이 된다. 이를 해결하기 위해 본 논문에서는 Graphite의 특성을 분석하고 최적의 조성비를 찾아내서 무선LAN 환경에 적합한 전파흡수체를 연구하였다. 먼저 Graphite와 지지재인 CPE(Chlorinated Polyethylene)를 이용하여 조성비별 전파흡수체 샘플을 제작하고, 각 샘플의 반사계수를 측정하였다. 측정된 데이터로부터 재료정수를 계산하고, 전파흡수체를 설계 및 제작하여 전파흡수능을 비교, 분석 하였다. 그 결과 조성비가 Graphite : CPE=50:50 wt%이고, 두께 1.7 mm 인 전파흡수체가 5.2 GHz에서 27 dB 이상의 전파흡수능을 가지는 우수한 전파흡수체를 개발하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.95-98
• /
• 2007

본 논문은 W-대역에서 유전손실 재료인 $TiO_2$의 전파흡수 특성을 분석하였다. 먼저 전파흡수체 샘플을 손실재료로 $TiO_2$ 와 바인더로 CPE를 사용하여 조성비별 제작하고, 네트워크 아날라이저를 이용하여 측정한 S-parameter로부터 $\ell-2\ell$ 법을 이용하여 재료정수를 계산하였다. 그리고 샘플들의 재료정수와 전파흡수 특성을 분석한 결과 조성비 $TiO_2:CPE=70:30wt.%$에서 우수한 전파흡수 특성을 보임을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.792-794
• /
• 2000

This paper describes the design and the analysis of electromagnetic system of Magnetic Switch using 2D parametric finite element method(EM-Pulse). Magnetic Switch is electrical equipment, which is widely used for switching on/off motors in industrial field. The transient state is simulated in order to calculate the response time of Magnetic Switch. The simulation is based upon a step-by-step integration of the electric circuit equations and the core movement. The contactor uses a permanent magnet for maintaining the closed state. The presented solution takes account of non-linear magnetic material property and spring force controlled by core position. The dynamic response of Magnetic Switch predicted by the simulation agrees closely with the required condition.

• 대한금속재료학회지
• /
• 제48권4호
• /
• pp.289-296
• /
• 2010

The effects of heat input and different microstructureswere investigated on the tensile-shear properties of an arc-brazed joint of theferritic stainless steel 429EM using a Cu-Si insert alloy. The brazing speed was fixed at 800 mm/min whilethe brazing current varied from 80 to 120A. For abrazing current lower than 100A, fracturing occurred at the joint root in the direction perpendicular to the tensile load. As the brazing current increased to 120A, fracturing occurred at the base metal or the joint root. The joint and the base metal had very similar yield and tensile load values. However, the amount of elongation was decreased considerably compared to when the base metal was used. The fracturing began at the triple point of the root part and was classified into three types. The difference in the tensile-shear properties was closely related to the three fracture types.